Atlas Sound AP-30TC Handleiding

Atlas Sound Speaker AP-30TC

Lees hieronder de 📖 handleiding in het Nederlandse voor Atlas Sound AP-30TC (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

AtlasSound.com 1/2

AP-30/AP-30T(C)/AP-30T-25

Omni-Purpose® 30 Watt Horn Loudspeakers

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

Speciﬁcations

Models AP-30, AP-30T(C), AP-30T-25

Power Rating 30 Watts Continuous

Frequency Response 300 - 12,000 Hz (Nominal)

500 Hz - 4500 Hz (±5dB)

Sensitivity 126dB at 30 Watts (Peak)

121dB at 30 Watts/1 Meter (Avg) 500 - 4500 Hz

108dB at 1 Watt/1 Meter (Avg) 500 - 4500 Hz

Dispersion Angle 60˚ (-6dB, 2000 Hz Octave Band)

Weight AP-30: 4.5 lbs (2.0kgs)

AP-30T: 5 lbs (2.3kgs)

AP-30T-25: 5 lbs (2.3kgs)

Finish Baked Epoxy

Dimensions H 11" x W 10" x D 101⁄ "2

Temperature Range -40˚C - 70˚C

Architect and Engineer Speciﬁcations

Loudspeakers shall be Atlas Sound Model ____________ (AP-30 or,

AP-30T(C), or AP-30T-25) or approved equal. Each loudspeaker shall be

equipped with an integral compression driver within waterproof housing.

The loudspeaker unit shall be constructed of structural aluminum with

double re-entrant acoustic path and exponentially-flared outer bell.

Power handling capability shall be 30 Watts continuous. Frequency

response range shall be 300-12,000 Hz (nominal), 500-4500 Hz (+5dB).

Sound pressure level shall be 121dB (30W/1M), 108dB (1W/1M). Sound

dispersion angle shall be 60˚. Model AP-30 shall have voice coil impedance

of 8 Ohms. Models AP-30T and AP-30T(C) shall have impedance selection

of 2500, 1300, 666, 333, 167, 89, 45 Ohms for 25, 70.7, or 100V line.

Power taps shall be available at .9, 1.8, 3.7, 7.5 and 15 watts for 25V

line; 2, 3.8, 7.5, 15 and 30 watts for 70V line; 4, 7.7, 15 and 30 Watts

for 100V line. Model AP-30T-25 shall have selection of 500, 250, 125,

83, 42, 21 Ohms for 25V line. Power taps shall be available at 1.2, 2.5,

5, 7.5, 15, 30 Watts. Loudspeaker shall be furnished with mounting

bracket allowing adjustment on the vertical and horizontal planes and shall

include provisions for surface or strap mounting. Wiring terminals shall be

enclosed. Units shall be weatherproof and constructed of metal and ABS

plastic. Finish shall be grey or beige (C) baked epoxy as indicated.

Di men sions shall be H 11" x W 10" x D 101⁄ ".2

Features

• Superior Intelligibility for Voice and Tone Signaling

• Wide Frequency Response for Optimum Sound Quality

• Environment Resistant for Outdoor and Indoor Use

• Omni-Purpose

® Bracket for Precise Positioning

• Choice of 8 Ohm or Transformer (T) Equipped Models for Versatile

25, 70.7, or 100V Line Applications

• U.S. Trademark Design is World Recognized for Quality and Dependability

• Available in Grey or Beige (C) Finish

Applications

All-purpose, environment resistant 30-Watt AP-30 Series loudspeakers

provide cost effective high-intelligibility voice and signal transmission

for high power indoor and outdoor public address, intercom, security,

alarm, or industrial signal systems. Units incorporate high-efficiency

compression drivers to project through high ambient sound levels,

over long distances and in wide open areas with fewer loudspeakers.

The AP-30 Series is renowned in the industry as the “professional

standard” for applications such as commercial buildings, distribution

centers, industrial warehouses, institutions, civic centers, and

recreational facilities.

Description

The 8 Ohm Model AP-30 and transformer-equipped Models AP-30T and

AP-30T-25 are double re-entrant loudspeakers which deliver 30 Watts

of continuous power handling, superior intelligibility and unparalleled

audio conversion-efficiency. The AP-30 Series operates within a

nominal frequency range of 300-12,000 Hz and offers a sensitivity of

126dB at rated power to provide clear voice and signal communication.

Models AP-30T and AP-30T-25 each feature an integral transformer to

meet a variety of distributed system needs. The AP-30T is equipped

with a versatile, 3-way, 25, 70.7, 100V line transformer, while Model

AP-30T-25 includes a 25V only line transformer. Transformers are

adjustable using Atlas Sound’s exclusive Vari-Tap

® Connect Center which

features a 7-position, watts/impedance selection switch. The labor saving

Vari-Tap® terminal is screwdriver adjustable and includes a protective

cover with built-in strain relief.

The trademarked square bell design signifies Atlas Sound quality and

reliability. The Omni-Purpose® mounting bracket (included on all models)

allows precise positioning in the vertical and horizontal planes with a

single adjustment and provides for installation of the loudspeaker on

conventional surfaces or by strap-mounting to I-beams or pillars. AP

Series loudspeakers are U.S. made to assure superior service reliability.

Weather-resistant construction is metal and matching ABS plastic with

metal components finished in grey epoxy (standard) or beige epoxy if

suffixed with (C) where noted.

Accessories

BX-1A Vandal resistant cover plate for armored cable

and conduit connection. Constructed of cast

aluminum.

APXB-G/APXB-N Optional mounting base for a standard 1-gang,

2-gang, or 4" sq. E.O. box. (G-Grey or N-Neutral)

AP-30 Series

AtlasSound.com 2/2

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

AP-30(T) Frequency Response

AP-30 (Impedance Sweep)

* Do Not Use

AP-30(T) (Harmonic Distortion - 1.5 watts @ 1 meter)

Polars Are Normalized To Zero On Axis

Atlas Sound products are designed and tested in our well-equipped research laboratory which contains a fully anechoic chamber, complete

analog Bruel & Kjaer measurement equipment and Techron® TEF 20® audio analyzer. Atlas Sound is proud to be a beta site for TEF software.

Mounting FlangeBell

Dimensions

DRIVER PROTECTION: The horn loudspeaker should not be operated at

frequencies outside the specified range, especially below horn cut-off. It is

suggested that any program material be high-passed at 300 Hz with a 6dB per

octave filter. This can be done by a low level filter at the amplifier input or by

a series capacitor at each loudspeaker. Electrolytic capacitors can be used but

they must be non-polarized (See Typical Capacitor Values Chart).

9/32" Dia.

3 Holes 120°

Apart, On 2.312

Bolt Circle

1-3/4"

10"

1/2" Banding Slot

2-7/8" Dia.

Frequency

(Hz)

Q Di Beamwidth

(Degrees)

500 3.09 4.89 160

1000 7.33 8.65 100

2000 17.84 12.51 60

4000 35.02 15.44 35

8000 48.15 16.83 35

Typical Capacitor Values

8 Ohm Driver 25 Volt Line 70 Volt Line 100 Volt Line

70 mfd 30 mfd 4 mfd 2 mfd

AP-15T Vari-Tap® Control Connect Center

Xfmr. Power Taps

AP-30T-25

Xfmr. Power Taps

Switch

Position

Impedance

(Ohms)

Watts

@ 25V

Watts

@ 70.7V

Watts

@ 100V

Impedance

(Ohms)

Watts

@ 25V

1 2500 – 2 4 500 1.2

2 1300 – 3.8 7.7 250 2.5

3 666 .09 7.5 15 125 5

4 333 1.8 15 30 83 7.5

5 167 3.7 30 X* 42 15

6 89 7.5 X* X* 21 30

7 45 15 X* X* – –

Frequency (Hz)

Fundamental

2nd Harmonic

3rd Harmonic

MAGNITUDE (dB)

30 watts @1 meter

1 watt @ 1 meter

MAGNITUDE (dB)

Frequency (Hz)

Impedance Amplitude

OHMS

Frequency (Hz)

Dimensions

Product specificaties

Merk:	Atlas Sound
Categorie:	Speaker
Model:	AP-30TC

Heb je hulp nodig?

Als je hulp nodig hebt met Atlas Sound AP-30TC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker Atlas Sound

Atlas Sound IP-SDM Handleiding

9 Juli 2023

Atlas Sound M1000-W Handleiding

9 Juli 2023

Atlas Sound I8SM+ Handleiding

8 Juli 2023

Atlas Sound PM8GD-B Handleiding

8 Juli 2023

Atlas Sound SMA-15 Handleiding

8 Juli 2023

Atlas Sound GD87W Handleiding

8 Juli 2023

Atlas Sound DT22 Handleiding

8 Juli 2023

Atlas Sound All Weather SM63T Handleiding

8 Juli 2023

Atlas Sound PM8SUB Handleiding

8 Juli 2023

Atlas Sound AP-30 Handleiding

7 Juli 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024

REL Acoustics Strata Handleiding

20 April 2024

REL Acoustics Strata III Handleiding

20 April 2024

Soen Transit Handleiding

18 April 2024

Miller & Kreisel MP300RC Handleiding

18 April 2024

Soen Transit XS Handleiding

18 April 2024

Miller & Kreisel MP7 Handleiding

18 April 2024

Qian QRBT1801 Handleiding

17 April 2024

Focal Twin6 Handleiding

17 April 2024

Kenwood KFC-WPS1000F Handleiding

16 April 2024