ATen SN3001 Handleiding

ATen Server SN3001

Lees hieronder de 📖 handleiding in het Nederlandse voor ATen SN3001 (100 pagina's) in de categorie Server. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/100

User Manual

ATEN Altusen™

SN3001 / SN3001P

SN3002 / SN3002P

RS-232 Secure Device Server

Secure Device Server User Manual

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE

STATEMENT

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

FCC Caution

Any changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate this equipment.

Warning

Operation of this equipment in a residential environment could cause radio

interference.

Achtung

Der Gebrauch dieses Geräts in Wohnumgebung kann Funkstörungen

verursachen.

KCC Statement:

Industry Canada Statement

This Class A digital apparatus complies with Canadian ICES-003.

Secure Device Server User Manual

iii

RoHS

This product is RoHS compliant.

About This Manual

This manual is provided to help you get the most out of your Secure Device

Server. It covers all aspects of the device, including installation, configuration,

and operation.

The Secure Device Server models covered in this user manuals include:

An overview of the information found in the manual is provided below.

Chapter 1, Introduction, introduces Secure Device Server. Its purpose,

features and benefits are presented, and its front and back panel components

are described.

Chapter 2, Hardware Setup, provides step-by-step instructions for setting

up Secure Device Server.

Chapter 3, Network Configuration and Login, explains how to log into

the Secure Device Server from a web browser.

Chapter 4, Web Console, explains the administrative procedures that are

employed to configure the Secure Device Server’s working environment.

Chapter 5, User Management, details login accounts and third-party

authentication services supported, such as RADIUS.

Chapter 6, Port Operating Modes, introduces the Secure Device Server’s

operating modes, and explains the purpose of each.

Chapter 7, Port Access, describes how to access the COM ports of the

Secure Device Server and start SNViewer.

Models Product Names

SN3001 1-Port RS-232 Secure Device Server

SN3001P 1-Port RS-232 Secure Device Server with PoE

SN3002 2-Port RS-232 Secure Device Server

SN3002P 2-Port RS-232 Secure Device Server with PoE

Product specificaties

Merk:	ATen
Categorie:	Server
Model:	SN3001
Gewicht:	200 g
Aantal Ethernet LAN (RJ-45)-poorten:	1
Certificering:	IEC 61000-4-11 DIPs\nUL 60950-1, UL 62368-1\nRoHS
Temperatuur bij opslag:	-40 - 75 °C
Luchtvochtigheid bij opslag:	5 - 95 procent
Console port:	RS-232
Afmetingen (B x D x H):	98 x 117 x 26 mm
Seriële poort(en):	1
AC-ingangsspanning:	100-240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 60 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent