Atdec TH-3065-LPT Handleiding

Atdec Niet gecategoriseerd TH-3065-LPT

Lees hieronder de 📖 handleiding in het Nederlandse voor Atdec TH-3065-LPT (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Flat Screen Wall Mount | Tilt

TH-3065-LPT

Component Checklist

IMPORTANT INFORMATION

Step 1. Check Components

! IMPORTANT Install Telehook TH-3065-LPT Wall Mount as per the Installation Instructions

! This product supports a maximum load of 40Kg (88 lbs).

! This product only supports displays with mounting hole conﬁ gurations from 100mm x 100mm (min.) to 600mm x 400mm (max.).

! The manufacturer does not accept responsibility for incorrect installation.

! Before installing this Telehook product, please check the display ventilation requirements with your LED/LCD manufacturer.

Check you have received all parts by comparing supplied parts against the Component Checklist and Hardware lists above.

Tilt Bracket (x2) Wall Plate

Wall Plate

End Cap (x2)

M4x12/25

(x4 each)

M5x12/25

(x4 each)

M6x12/25

(x4 each)

M8x16/25

(x4 each)

Spacer

(x4 each)

Multi

Washer

(x4 each)

Coach

Screw

(x4 each)

Nylon

Anchor

(x4 each)

Washer

(x4 each)

Wall Mounting HardwareTools Required Display Mounting Hardware

• Power Drill

• Phillips Head

Screwdriver

• 5mm (1/4”) Drill Bit

• 10mm (3/8”)

Masonry Drill Bit

• 13mm (1/2”) Socket

Wrench or Shifter

Masonry Wall Timber Stud

5mm

(3/

”)

50mm (2”)

Stud

10mm

(3/

8”)

58mm (2.3”)

Wall

Tip: Use the supplied magnetic bubble level

to ensure wall plate is horizontal.

Note: Use a stud ﬁ nder to accurately locate the centre of each

stud. Ensure that all four screws are ﬁ xed securely into the studs.

10mm (3/

8”) hole 5mm (3

16 ”) hole

B3 B3

Step 2. Mount the Wall Plate

Installation Instructions

Click!

Push

Rear View of Screen

TOP

Pull

12max

Step 3. Attach Tilt Brackets to Screen

Step 7. Cable ManagementStep 6. Unlocking Screen Step 8. Set Screen Tilt

Installation Complete

A5 Spacer (optional)

Use for recessed

mounting holes only.

Use longer mounting

screws with spacers.

Note: If dimension ‘A’ is larger than

195mm (7.68“) the maximum tilt

shown in will be reduced.Step 8

A6 Multi-washer

Tilt Bracket

A1 A2 A3 A4|||

Mounting Screw

For M5 &

M6 Screws

For M4 Screws

For M8 Screws

Step 4. Attach End Caps Step 5. Attach Screen to Wall Plate (two people required)

Push each of the End Caps

onto the tabs at each end

of the wall plate.

5.1 Hook the Tilt

Brackets onto the

top edge of the

Wall Plate.

Unlock the Tilt

Brackets from

the wall plate.

Pull the bottom

of the screen out

from the wall to

provide access for

connecting cables

to the screen.

Once cables are

connected, lock

screen to Wall Plate

as in .Step 5.2

5.2 Lock the

screen to the

Wall Plate by

gently pushing

the bottom of

the screen.

Pull down both strings to unlock the Tilt

Brackets from the Wall Plate.

TIP: Hide strings by

sticking magnetic

pendants onto the

Tilt Brackets behind

the screen.

Once the brackets

are locked, set the

screen tilt by gently

pulling or pushing

the top edge of the

screen.

Product specificaties

Merk:	Atdec
Categorie:	Niet gecategoriseerd
Model:	TH-3065-LPT
Kleur van het product:	Zwart
Materiaal behuizing:	Staal
In hoogte verstelbaar:	Nee
Montagewijze:	Muur
Maximale gewichtscapaciteit:	40 kg
Paneelmontage-interface:	100 x 100,100 x 150,100 x 200,120 x 120,120 x 180,200 x 100,200 x 200,200 x 150,200 x 300,200 x 400,280 x 150,300 x 200,300 x 400,300 x 300,300 x 100,360 x 304,400 x 200,400 x 400,400 x 100,400 x 300,400 x 600 mm
Montage interface compatibiliteit (min):	100 x 100 mm
Montage interface compatibiliteit (max):	400 x 600 mm
Maximale schermgrootte:	65 "
Minimale schermgrootte:	32 "