Atdec Modular AWM-LTH Handleiding

Atdec Niet gecategoriseerd Modular AWM-LTH

Lees hieronder de 📖 handleiding in het Nederlandse voor Atdec Modular AWM-LTH (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
AWM-LTH Page 1 of 2
Installation Guide
AWM-LTH
Heavy Duty VESA Tilt Head
COMPONENT CHECKLIST
IMPORTANT INFORMATION
! Please ensure this product is installed as per these installation instructions.
! Curvedmonitors,deepdevices(suchasall-in-onePCs)andosetVESAlocationsexertadditionalleveragethatcanexceedthe
capacityofthemounteventhoughthemonitorweightmaybewithinthestatedrange.
! Themanufactureracceptsnoresponsibilityforincorrectinstallation.
! ThisproductiscompatiblewithAWMSeriesmonitorarmproducts.
Monitorweightshouldbe
withintheweightrangeof
all modular elements that
make up the complete
monitormountingsolution.
REQUIRED TOOLS
• Phillips Head Screwdriver
A
Heavy Duty
Tilt Head
(x1)
B
Screw
M4x25mm
(x4)
C
Screw
M4x16mm
(x4)
D
Screw
M4x12mm
(x4)
E
Spacer
(x4)
F
4mm
allen key
(x1)
WEIGHT RANGE
0 - 18kg
(0 - 40 )lb
AWM-LTH Page 2 of 2
atdec.com | atdec.co.uk | atdec.com.au
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©20190121
1. Attach VESA head to monitor
1.2Ensuresuitablescrewsizeisused. VESAmountingcompatibility1.3
Note: Forothersizes,useasuitable
adaptor plate
1.1ScrewtheVESAheadontomonitor
Note:Spacersmayberequiredfor
curved, recessed or uneven monitor
surfaces.
2. Mount monitor onto arm
3.1Usetheknobtotightenandloosenthe
tilttensiontosuityourmonitorweight.
Note:Alwayssupportthemonitor
whilstadjustingtopreventitfrom
fallingforwardsharply.
Tighten
Loosen
2.1 Push tilt head onto the shaft at the
endofthemonitorarm.
2.3 Tightenthejointscrewtosecure
thetiltheadandmonitorinplace.
3. Adjust tilt tension
Flush
Too long Too short
Spacer
5mm 12mm
Note: Check the arm rotation
issmoothaftertightening.
2.2Ensuretiltheadisfullypushed
ontoshaft.
100mm
75mm
100mm
75mm


Product specificaties

Merk: Atdec
Categorie: Niet gecategoriseerd
Model: Modular AWM-LTH

Heb je hulp nodig?

Als je hulp nodig hebt met Atdec Modular AWM-LTH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Atdec

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd