Atdec AWM-A71-S Handleiding

Atdec Niet gecategoriseerd AWM-A71-S

Lees hieronder de 📖 handleiding in het Nederlandse voor Atdec AWM-A71-S (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

AWM-A71 Page 1 of 4

Installation Guide

AWM-A71

710 Arm

COMPONENT CHECKLIST

REQUIRED TOOLS

Monitor Arm

(x1)

VESA Head

(x1)

Screw

M4x25mm

(x4)

Screw

M4x16mm

(x4)

Screw

M4x12mm

(x4)

Spacer

(x4)

Security

screw

(x1)

4mm

allen key

(x1)

Post Clamp

(x1)

WEIGHT RANGE

• Phillips Head Screwdriver

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! The manufacturer accepts no responsibility for incorrect installation.

! This product is compatible with Atdec AWM Series products.

0 - 9kg

(0 - 20lbs)

AWM-A71 Page 2 of 4

2. Set arm rotation to 180° (optional)

2.1 Remove plastic sleeve

from post clamp.

2.2 Remove rotation ring. Place rotation ring in 2.3

desired position.

Note: rotation ring placement

depends on the position of the clamp

on the post. The tag on the ring

should always face toward the user.

1. Press

2. Lift

Note rotation is set to 360� by default.

180°

360°

Default

Position

Flipped

Position

Tag

1. Fix clamp to Post or Wall Channel

1.1 Ensure knob is undone. Slide post clamp into channel.1.2

Push knob to

aid insertion

1.3 Hold clamp in desired position on

channel and turn knob to lock in place.

3. Fit arm onto post clamp

e: Check the

arm rotation is

smooth after

tightening.

3.1 Push arm onto shaft. 3.2 Ensure arm is fully pushed onto shaft. 3.3 Tighten joint screw.

AWM-A71 Page 3 of 4

5. Mount monitor

6. Adjust tilt tension & Install security screw

Gap No gap

Monitor arm

5.2 Ensure that the VESA head sits flush within

the monitor arm. There should be gap.no

6.1 Use the allen key to adjust the tilt tension until the monitor

holds in a vertical position at the end of the arm.

Note: Support

monitor while

adjusting.

6.2 OPTIONAL security screw

To install the optional security screw tilt the head upwards

Tighten

Loosen

5.1 Insert VESA head into the monitor arm Push the lever down to 5.3

secure monitor to the arm

assembly

4. Attach VESA head to monitor

Flush

Too long Too short

Spacer

5mm 12mm

4.2 Screw the VESA head onto monitor

Note spacers may be required for curved,

recessed or uneven monitor surfaces.

4.3 Ensure the correct screw length is used

to attach the monitor.

4.1 VESA mounting compatibility

100mm

75mm

100mm 75mm

Note: For other sizes, use a suitable

adaptor plate (sold separately).

Product specificaties

Merk:	Atdec
Categorie:	Niet gecategoriseerd
Model:	AWM-A71-S
Kleur van het product:	Zilver
Breedte:	710 mm
Materiaal behuizing:	Aluminium
Maximale gewichtscapaciteit:	9 kg
Aantal displays ondersteund:	1
Verbeterd kabelbeheer:	Ja
Type product:	Flatscreen bevestigingsarm