Atdec AF-AA-P Handleiding

Atdec Niet gecategoriseerd AF-AA-P

Lees hieronder de 📖 handleiding in het Nederlandse voor Atdec AF-AA-P (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

AF-AA Page 1 of 4

COMPONENT CHECKLIST

Monitor

arm

(x1)

Hand grip assembly

(x1)

VESA

head

(x1)

Rotation

limiter

(x1)

Security Screw

M4 x 16mm

(x1)

Mounting

screws

M4 x 10mm

(x4)

Mounting

screws

M4 x 12mm

(x4)

Mounting

screws

M4 x 16mm

(x4)

Primary arm

cable cover

(x1)

Secondary arm

cable cover

(x1)

Installation Guide

AF-AA

Accessory Arm

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! This product is compatible with the range of AF Poles and arms.

! The manufacturer accepts no responsibility for incorrect installation.

REQUIRED TOOLS

WEIGHT RANGE

• Phillips Head Screwdriver

0 - 8kg

(0 - 17.6lbs)

AF-AA Page 2 of 4

1. Install VESA monitor head

2. Install arm assembly

5mm

Allen Key

Pole

Top Cap

Spacers (may be required

for recessed and uneven

surfaces)

VESA monitor

head

Screen

M4x10/12/16mm

Phillips Head Mounting

Screws

1.1 Install VESA monitor head as shown.

2.1 Remove Top Cap and Allen key

from existing AF- pole product

2.4 Place arm and

handgrip on to the pole

Note Ensure handgrip tab

lines up with slot in pole

2.5 Turn the handgrip to fix the height of the arm

and place the top cap back on to the pole

2.3 Place handgrip tab

in arm assembly

100mm

Arm Assembly

2.2 OPTIONAL ROTATION LIMITER

Insert rotation limiter for 180�

rotation around mounting pole

AF-AA Page 3 of 4

4.1 Unlock Handgrip ensuring both the

screen and arm assembly are supported

4.2 Lift/Lower the Screen to the desired

height. Move both Screen and Arm

assembly together

4.3 Lock Handgrip firmly

4. Adjusting Height

5. Cable Management

3. Mounting Monitor

VESA monitor head

Arm Assembly

3.2 OPTIONAL SECURITY SCREW

Ensure the Monitor is supported, then loosen the Monitor head

screw with the 5mm Allen Key and tilt screen up before installing

the M4 x 16mm Security Screw into the Security Screw hole

Note: Support Screen

when adjusting tilt.

3.1 Insert VESA monitor head into

the receptacle in the Arm Assembly

5mm Allen Key

Phillips Head

Screwdriver

Loosen

Tighten

Security Screw

Hole

M4 x 16mm

Security Screw

Monitor head

screw

Lock Slot

Elbow Joint

‘click’

5.1 After plugging in your cables,

install the Cable Covers.

Insert Cable Covers

up into Lock Slots.

5.2 Push Cable Covers away from

Elbow Joint to secure in place.

5.3 Cable Clips and Cable Stops can be installed

to further manage cables.

Cable Stop

Cable Clip

Note: Ensure enough cable

slack is given to allow for

movement.

Product specificaties

Merk:	Atdec
Categorie:	Niet gecategoriseerd
Model:	AF-AA-P
Kleur van het product:	Zilver
Breedte:	422 mm
Gewicht verpakking:	820 g
Breedte verpakking:	140 mm
Diepte verpakking:	270 mm
Hoogte verpakking:	66 mm
Materiaal behuizing:	Aluminium, Plastic
Maximale gewichtscapaciteit:	8 kg
Paneelmontage-interface:	75 x 75, 100 x 100 mm
Aantal per verpakking:	1 stuk(s)
Draaihoek:	360 °
Aantal displays ondersteund:	1
(Buitenste) hoofdverpakking hoogte:	355 mm
(Buitenste) hoofdverpakking breedte:	290 mm
(Buitenste) hoofdverpakking brutogewicht:	8700 g
(Buitenste) hoofdverpakking lengte:	305 mm
Hoeveelheid per (buitenste) hoofdverpakking:	10 stuk(s)
Type product:	Flatscreen bevestigingsarm
Bereik kantelhoek:	-70 - 70 °