Asus M2NPV-VM Handleiding

Asus Moederbord M2NPV-VM

Bekijk gratis de handleiding van Asus M2NPV-VM (13 pagina’s), behorend tot de categorie Moederbord. Deze gids werd als nuttig beoordeeld door 38 mensen en kreeg gemiddeld 4.5 sterren uit 19.5 reviews. Heb je een vraag over Asus M2NPV-VM of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/13

Motherboard

M2NPV-VM

ASUS M2NPV-VM 1-7

Onboard LED

The motherboard comes with a standby power LED that lights up to indicate

that the system is ON, in sleep mode, or in soft-off mode. This is a reminder

that you should shut down the system and unplug the power cable before

removing or plugging in any motherboard component. The illustration below

shows the location of the onboard LED.

1.4 Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any

component.

• Use a grounded wrist strap or touch a safely grounded object or a metal

object, such as the power supply case, before handling components to

avoid damaging them due to static electricity

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic

pad or in the bag that came with the component.

• Before you install or remove any component, ensure that the ATX power

supply is switched off or the power cord is detached from the power

supply. Failure to do so may cause severe damage to the motherboard,

peripherals, and/or components.

M2NPV-VM

M2NPV-VM Onboard LED

SB_PWR

Standby

Power

OFF

Powered

Off

ASUS M2NPV-VM 1-21

1.8 Expansion slots

In the future, you may need to install expansion cards. The following sub-sections

describe the slots and the expansion cards that they support.

1.8.1 Installing an expansion card

To install an expansion card:

1. Before installing the expansion card, read the documentation that came with

it and make the necessary hardware settings for the card.

2. Remove the system unit cover (if your motherboard is already installed in a

chassis).

3. Remove the bracket opposite the slot that you intend to use. Keep the screw

for later use.

4. Align the card connector with the slot and press rmly until the card is

completely seated on the slot.

5. Secure the card to the chassis with the screw you removed earlier.

6. Replace the system cover.

1.8.2 Conguring an expansion card

After installing the expansion card, congure it by adjusting the software settings.

1. Turn on the system and change the necessary BIOS settings, if any. See

Chapter 2 for information on BIOS setup.

2. Assign an IRQ to the card. Refer to the tables on the next page.

3. Install the software drivers for the expansion card.

Make sure to unplug the power cord before adding or removing expansion

cards. Failure to do so may cause you physical injury and damage motherboard

components.

Product specificaties

Merk:	Asus
Categorie:	Moederbord
Model:	M2NPV-VM
Breedte:	245 mm
Diepte:	245 mm
Type stroombron:	ATX
Aantal USB 2.0-poorten:	4
VGA (D-Sub)poort(en):	1
Microfoon, line-in ingang:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Hoofdtelefoonuitgangen:	1
Meegeleverde software:	NVIDIA MediaShield RAID\nASUS PC Probe II \nASUS LiveUpdate\nAMD Cool ' n' Quiet \nAnti-virus (OEM)
Processor socket:	Socket AM2
Processorfabrikant:	AMD
Maximum intern geheugen:	8 GB
Audio-uitgangskanalen:	5.1 kanalen
Netwerkfuncties:	Gigabit Ethernet
ECC:	Ja
Aantal IEEE 1394-/Firewire-poorten:	1
Audiochip:	ADI AD1986A
PS/2 poort(en):	2
Uitbreidingsslots:	1x PCI Express x16 \n1x PCI Express x1 \n2x PCI
Speciale eigenschappen:	ASUS Q-Fan 2 \nASUS My Logo\nASUS CrashFreeBIOS2\nASUS EZ Flash 2
Non-ECC:	Ja
Onderhoudseigenschappen:	WfM 2.0, DMI 2.0, WOL PME, WOR, PXE
Parallelle poort(en):	1
Max. aantal SMP-processoren:	1
Moederbord form factor:	micro ATX
Aantal geheugenslots:	4
Grootte BIOS-geheugen:	32 Mbit
Aansluiting voor CPU koeler:	Ja
Aansluitingen voor behuizingsventilatoren:	2
ATX Power connector (24-pin):	Ja
USB 2.0 aansluitingen:	2
Aansluiting voor audiopaneel aan voorzijde:	Ja
Chassis intrusion aansluiting:	Ja
S/PDIF uitgang:	Ja
IEEE1394 aansluitingen:	1
CD/AUX audio-ingang:	Ja
Grafische controller:	GeForce 6 GPU
GAME/MIDI aansluiting:	Ja