Ashly FX750.2 Handleiding

Ashly Receiver FX750.2

Lees hieronder de đź“– handleiding in het Nederlandse voor Ashly FX750.2 (23 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/23
1
FX SERIES
FX-500.4
FX-500.2
FX-125.4
FX-125.2
FX-60.4
FX-60.2
4- and 2-channel
Power Amplifiers
Operating Manual
22
FX Amplifier • Operating Manual
Please read the following
important technical, safety
and environmental notices
before installing and using your
amplifier.
Technical Notices
All reasonable design and
engineering steps have been taken
to ensure that these amplifiers
always perform satisfactorily in
their intended application and
environment and will provide
appropriate levels of support
to ensure that all reasonable
customer needs and expectations
are met. Such support however
is contingent on the following
provisions.
These amplifiers are Class-I
products and should be installed
with a mains cable including the
required earth connection to
comply with the Safety Class-I.
These amplifiers should always
be installed by competent and
qualified personnel. Amplifier
damage or failure caused by
installation or operational errors
may invalidate support, warranty or
guarantees of performance.
These amplifiers are not suitable
for use in locations where they may
be accessible to minors.
These amplifiers are intended
to be used specifically for the
amplification of audio signals
and for connection to moving-
coil loudspeaker systems. Use of
these amplifiers for amplification
of signals outside the audio
band (20Hz to 20kHz) or to drive
transducers other than moving-
coil loudspeakers may invalidate
support, warranty or guarantees of
performance.
These amplifiers should only
be used within professionally
installed and configured audio
systems comprising input and
output ancillary equipments that
is known to be of an appropriate
level of performance and in good
operating condition. Any damage
to, or unsatisfactory performance
from, these amplifiers caused
by inadequate or failed input or
output ancillaries may invalidate
support, warranty or guarantees of
performance.
These amplifiers are intended to be
installed and operated indoor in a
controlled environment (pollution
degree, PD2) within an ambient
temperature range of 0°C to 40°C.
These amplifiers are not intended
for use above 2000 meters above
sea level. Amplifiers installation
or operated in environments
outside these limits may invalidate
support, warranty or guarantees of
performance.
Specific warranty terms are the
responsibility of the amplifier re-
seller.
Safety and Environmental
Notices
Note: The intent of the lightning
flash with arrowhead symbol
in a triangle is to alert the user
to the presence of uninsulated
“dangerous” voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to humans.
Note: The intent of the exclamation
point within an equilateral triangle
is to alert the user to the presence
of important safety, and operating
and maintenance instructions in
this manual.
Technical and Safety Notices
WARNING! TO PREVENT FIRE
OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.
Ambient Temperature Note:
If this equipment is operated
in a confined or multiple rack
installation, the internal ambient
operating temperature may exceed
the external ambient temperature.
It is important to ensure in these
circumstances that the published
maximum operating temperature
for the equipment is not exceeded.
Reduced Air Flow: Ensure that rack
or other closed installation does not
restrict the cooling airflow required
for safe and reliable operation of
the equipment.
33
FX Amplifier • Operating Manual
Important Safety Instructions and Environmental Statement
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near
water.
Do not submerge the equipment in
water or liquids.
Do not use any aerosol spray,
cleaner, disinfectant or fumigant
on, near or into the equipment.
Clean only with a dry cloth.
Do not block any ventilation
opening. Install in accordance with
the manufacturer’s instructions.
Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus
(including amplifiers) that produce
heat.
To reduce the risk of electrical
shock, the power cord shall be
connected to a mains socket
outlet with a protective earthing
connection.
Do not defeat the safety purpose
of the polarized or grounding type
plug. A polarized plug has two
blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete
outlet.
Protect the power cord from being
walked on or pinched particularly
at plugs, convenience receptacles,
and the point where they exit from
the apparatus.
Do not unplug the unit by pulling on
the cord, use the plug.
Only use attachments/accessories
specified by the manufacturer.
Unplug this apparatus during
lightning storms or when unused
for long periods of time.
Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such
as power supply cord or plug is
damaged, liquid has been spilled
or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
The appliance coupler, or the
AC Mains plug, is the AC mains
disconnect device and shall remain
readily accessible after installation.
Adhere to all applicable, local
codes.
Consult a licensed, professional
engineer when any doubt or
questions arise regarding a
physical equipment installation.
Environmental Statement
This product complies with
international directives, including
but not limited to the Restriction
of Hazardous Substances (RoHS)
in electrical and electronic
equipment, the Registration,
Evaluation, Authorization and
restriction of Chemicals (REACH)
and the disposal of Waste Electrical
and Electronic Equipment (WEEE).
Consult your local waste disposal
authority for guidance on how
properly to recycle or dispose of
this product.


Product specificaties

Merk: Ashly
Categorie: Receiver
Model: FX750.2

Heb je hulp nodig?

Als je hulp nodig hebt met Ashly FX750.2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Ashly

Ashly

Ashly KLR 5000 Handleiding

6 September 2023
Ashly

Ashly Pema 4250 Handleiding

6 September 2023
Ashly

Ashly Pema 4125 Handleiding

6 September 2023
Ashly

Ashly nX754 Handleiding

6 September 2023
Ashly

Ashly ne8250 Handleiding

6 September 2023
Ashly

Ashly TM-360 Handleiding

6 September 2023
Ashly

Ashly TM-335 Handleiding

6 September 2023
Ashly

Ashly Pema 8125 Handleiding

6 September 2023
Ashly

Ashly KLR 3200 Handleiding

6 September 2023

Handleiding Receiver

Nieuwste handleidingen voor Receiver