ART STOMPWATCH Handleiding

ART Klok STOMPWATCH

Lees hieronder de đź“– handleiding in het Nederlandse voor ART STOMPWATCH (8 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
STOMPWATCH
PROFESSIONAL STAGE CLOCK AND TIMER
USER’S GUIDE
IMPORTANT SAFETY INSTRUCTION – READ FIRST
This symbol, whenever it appears, This symbol, wherever it appears, alerts you
alerts you to the presence of uninsulated to important operating and maintenance
dangerous voltage inside the enclosure-voltage instructions in the accompanying literature.
that may be sufficient to constitute a risk of shock. Please read the manual.
Read instructions:
Retain these safety and operating instructions for future reference. Heed all warnings printed here and on
the equipment. Follow the operating instructions printed in this user manual.
Do not open:
There are no user serviceable parts inside. Refer any service work to qualified technical personnel only.
Moisture:
To reduce the risk of fire or electrical shock do not expose the unit to moisture or use in damp or wet
conditions. Do not place container of liquid on unit.
Heat:
Do not locate the unit close to excessive heat or direct sunlight, as this could cause a fire hazard. Locate
the unit away from any equipment, which produces heat such as: power supplies, power amplifiers and
heaters.
Environment:
Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid tobacco ash, drink
spillage and smoke, especially that associated with smoke machines.
Handling:
Protect the controls from damage during transit. Use adequate padding if you need to ship the unit. To
avoid injury to yourself or damage to the equipment, take care when lifting, moving, or carrying the unit.
Servicing:
Refer servicing to qualified technical personnel only.
Installation:
Install the unit in accordance with the instructions printed in the user manual.
1
INTRODUCTION
Thank you for purchasing Applied Research and Technology’s STOMPWATCH. This stompbox-format
clock and timer will help you keep track of time on stage and during rehearsals.
The STOMPWATCH was designed and constructed with the absolute best components, assuring a
lifetime of reliable performance.
The STOMPWATCH offers
• Large Display: A four-digit seven segment display that can be seen from across the stage.
• Timer Mode Indicator: This yellow LED is on in Timer mode.
• Clock Mode Indicator: This red LED is on in Clock mode.
• Timer Start/Stop Indicator: This green LED is on when the timer is counting.
• Clock Adjust Knob: Use this encoder knob with the Hour and/or Minute buttons to adjust the clock time.
• Hour Button: Pressing this button will allow you to adjust the clock’s hour using the “Clock Adjust” knob.
• Minute button: Pressing this button allows you to adjust the clock’s minutes using the “Clock Adjust” knob.
• Mode Select: Pressing this footswitch will toggle the STOMPWATCH between Timer and Clock mode.
• Timer Start/Stop: Pressing this footswitch will start or stop the timer while in Timer mode.
Rear
• Power switch: Connects/disconnects the battery power.
• Standard 9V battery compartment.
• Adaptor DC input/output: Accepts standard center-pin negative 9V stompbox adaptors. These two power
jacks are connected in parallel to allow for easy daisy-chaining of your stompbox power.
Power Options
The STOMPWATCH is ideally powered from a 9V power adaptor and will powerup as soon as a suitable
DC power adaptor is connected. For convenience, a 9V battery may be installed to act as a backup in case
of external power failure. The power switch connects the battery.
The STOMPWATCH, comes with a factory installed #V CR2032 3V coin cell to keep the real time clock
operational when the unit is powered off, this cell will need replacing every 3 years, or when the accuracy of
the clock is drastically affected.
Power Options
The STOMPWATCH is ideally powered from a 9V power adaptor and will powerup as soon as a suitable
DC power adaptor is connected. For convenience, a 9V battery may be installed to act as a backup in case
of external power failure. The power switch connects the battery.
Warranty
• 3 years parts and labor warranty
INSTALLATION
The ART STOMPWATCH may be used in a wide variety of applications and environments. The all-steel
chassis is designed for continuous professional use. Mounting location is not critical; however for greater
performance reliability we recommend that you not place the unit on top of power amps, or other sources of
heat and/or strong magnetic fields.
UNPACKING
Your STOMPWATCH was packed with care at the factory. The shipping carton was designed to protect it
during initial shipment. Please retain this carton for use in transporting the STOMPWATCH when it is not
installed in a rack, or in the unlikely event that you need to return your STOMPWATCH for servicing. The
shipping carton should contain:
• The STOMPWATCH
• This user's guide


Product specificaties

Merk: ART
Categorie: Klok
Model: STOMPWATCH

Heb je hulp nodig?

Als je hulp nodig hebt met ART STOMPWATCH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Klok ART

Handleiding Klok

Nieuwste handleidingen voor Klok