ART DJ Pre II Handleiding

ART Receiver DJ Pre II

Bekijk gratis de handleiding van ART DJ Pre II (12 pagina’s), behorend tot de categorie Receiver. Deze gids werd als nuttig beoordeeld door 18 mensen en kreeg gemiddeld 3.6 sterren uit 9.5 reviews. Heb je een vraag over ART DJ Pre II of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/12

Artcessories

User's Manual

IMPORTANT SAFETY INSTRUCTION – READ FIRST

This symbol, whenever it appears,

alerts you to the presence of

uninsulated dangerous voltage

inside enclosure-voltage that may be

sufficient to constitute risk of shock.

This symbol, whenever it appears,

alerts you to important operating

and maintenance instructions in

the accompanying literature.

Please read the manual.

Read Instructions: Retain safety and operating instructions for

future reference. Heed all warnings printed here and on the

equipment. Follow the operating instructions printed in this user

guide.

Do not open: There are no user serviceable parts inside. Refer

any service work to qualified technical personnel only.

Grounding: Only connect the unit to equipment with properly

grounded mains power. Do not defeat the grounding and

polarization means of the power cord plug of the connected

equipment. Do not remove or tamper with the ground

connection on the power cord of the connected equipment.

Environment: Protect from excessive dirt, dust, heat, and

vibration when operating and storing. Avoid tobacco ash, drink

spillage and smoke, especially that associated with smoke

machines.

Handling: Protect the controls from damage during transit. Use

adequate padding if you need to ship the unit. To avoid injury to

yourself or damage to the equipment, take care when lifting,

moving or carrying the unit.

Servicing: Refer servicing to qualified technical personnel.

Installation: Install the unit in accordance with the instructions

printed in the user guide.

INTRODUCTION:

Thanks for purchasing Applied Research and

Technology’s DJPRE II™, a high quality phono preamp

designed for your home and studio. It acts as an

interface between your turntable and your audio

recording system. The analog input capacitance can be

switched between 100pf and 200pf to optimize your

phono cartridge response. A switchable low cut filter

removes turntable rumble while leaving the audio

pristine. The front gain trim control and signal/clip LED

allow you to optimize the preamp's gain for a wide range

of input sources. The built-in low noise phono preamp

circuitry is highly accurate and precisely conforms to the

RIAA standard. The line output jacks are low impedance

and can work with any sound card.

Housed in an aluminum anodized case, the DJPRE II

can be powered by a wide variety of external supplies. If

you need to amplify and EQ your vinyl records to

interface with an audio workstation, sound card, or

monitor system, the DJ PRE II gives you flawless audio

reproduction in a rugged and reliable package.

FEATURES:

• High accuracy/low noise preamp

• Switchable low-cut rumble filter

• Variable preamp gain

• Signal present/clip indicator

• Selectable cartridge loading

• RCA preamp outputs

• Heavy duty extruded chassis

• Designed and developed in the USA

Product specificaties

Merk:	ART
Categorie:	Receiver
Model:	DJ Pre II
Kleur van het product:	Zwart
Gewicht:	570 g
Breedte:	117 mm
Diepte:	114 mm
Hoogte:	47 mm
Stroomvoorziening:	150mA
LED-indicatoren:	Stroom
Connectiviteitstechnologie:	Bedraad
Aansluiting voor netstroomadapter:	Ja
Bedoeld voor:	Thuis
Audio-uitgangskanalen:	2.0 kanalen
Frequentiebereik:	10 - 50000 Hz
Signaal/ruis-verhouding:	90 dB
Totale harmonische vervorming (THD):	0.01 procent
Voeding, voltage ingang:	7 - 12, 9 - 12 V
Piekvermogen per kanaal:	- W
Synchronisatie ingangsimpedantie:	47000 Ohm
Speakers connectiviteit type:	RCA
Line inputs (RCA):	1
Line outputs (RCA):	1
Gain aanpassing:	Draaiknop
Phono audio in (L, R):	Ja