Arecont Vision D4SO-AV3115 Handleiding
Arecont Vision
Bewakingscamera
D4SO-AV3115
Bekijk gratis de handleiding van Arecont Vision D4SO-AV3115 (19 pagina’s), behorend tot de categorie Bewakingscamera. Deze gids werd als nuttig beoordeeld door 36 mensen en kreeg gemiddeld 5.0 sterren uit 18.5 reviews. Heb je een vraag over Arecont Vision D4SO-AV3115 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/19
Arecont Vision D4SO Outdoor Dome Series Installation Manual
0 | P a g e
Arecont Vision D4SO Outdoor Dome Series Installation Manual
1 | P a g e
D4SO Outdoor Dome Installation Manual
A. Arecont Vision D4SO Dome Camera
Inside the box:
B. Mounting template
C. - Security L key
D. One double sided hex key
E. One single sided hex key
F. 6- position external power & IO plug
G. Pack of four (4) wood screws and four (4)
dry wall anchors
• #1 Phillips head screw driver
Not included but needed:
• #2 Phillips head screw driver
• Small Flat Head screw driver
Image 1
Mounting the Camera:
1. Remove camera and hardware from the
box.
2. Using the Mounting Template, prepare
the mounting provisions for camera
installation. NOTE: the 19.5mm diameter
hole on the Mounting template is where
the Ethernet cable will be exiting the
D4SO, align accordingly. If using the
side conduit hole, please see step 7
below.
3. Using Security L key, loosen the four (4) -
screws securing the dome cover (Image
2). Remove vandal resistant dome
cover. NOTE: Do not remove screws
from the dome cover.
2 Image
G
F
E
C
A
D
B
Arecont Vision D4SO Outdoor Dome Series Installation Manual
2 | P a g e
4. Run Ethernet cable through the hole on the
bottom of D4S g it into the RJ45 port O and plu
on Arecont Vision’s compact MegaVideo
®
camera. (Image 3) . NOTE: If the camera will
be powered via PoE, please skip to step 5.
Image 3
5. If the camera is powered by an outside power
supply, run power wires through the hole and
connect power wires to appropriate contacts
of 6-postion connector using small flat screw
driver and connect 6-position plug camera to
as shown in Image 4-1.
Note: Please make sure the polarity of the
AC/DC input on the camera the way match
wires are installed in connector shown in
Image 4-2.
Image 1 4-
Image 2 4-
6. Align the holes in the camera with the
prepared holes on the mounting surface.
Attach the camera to the mounting surface
with the wood optional screws or any
hardware suitable for the mounting surface.
Product specificaties
| Merk: | Arecont Vision |
| Categorie: | Bewakingscamera |
| Model: | D4SO-AV3115 |
Heb je hulp nodig?
Als je hulp nodig hebt met Arecont Vision D4SO-AV3115 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Bewakingscamera Arecont Vision
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
Handleiding Bewakingscamera
- VideoComm
- Furrion
- B & S Technology
- Laserliner
- Sony
- Kwikset
- Western Digital
- Vivotek
- YoloLiv
- Edimax
- Minox
- Pelco
- Manhattan
- American Dynamics
- Videotec
Nieuwste handleidingen voor Bewakingscamera
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025