Arcelik 6133 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Arcelik 6133 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 108 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Operation of the product
Quick Guide
1. On-Off / Program Selection knob
2. Rinse aid ( ) indicator
3. Low salt ( ) warning indicator
4.
5. Delay indicator
6.
7. On/Off Control light
8. Program Monitoring Indicator
a) Washing Indicator
b) Drying Indicator
c) Program Ended Indicator
9. Start / Hold / Cancel key
10. Delay function key /
11.
12.
Half Load function /
Child Lock Indicator
Child Lock Key 3 sec
Tablet detergent function
a
1 2 3 4 5 6 7
8
9101112
c
b
Half load indicator
Tablet detergent indicator
3 sec
Read “Safety Instructions” section first!
123
Eco
(Eko *)
Intensive
(Yoğun)
Express (#)
(Hzl 58')
50 ÂșC 70 ÂșC 60 ÂșC
Suitable for washing dishes with
normal amount of soil. It is the most
efficient program in terms of
combined power and water
consumption. This is used for
assessing the compliance with EU's
eco-design directive.
Suitable for heavily soiled dishes,
pots and pans.
Daily washing programme for
normally soiled dishes in the fastest
way.
Medium High Medium
+ + -
+++
+++
205 120 58
12,9 17,6 11,8
0,937 1,65 1,2
Degree of Soiling
Energy (kWh)
Prewash
Wash
Dry
Duration (min)
Water (I)
Programme Data and Average Consumption Values Table
Loading Capacity: 13
The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions. * Reference programme for testing
institutes. The tests in accordance with EN 50242/60436 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and using the test programme. The values
given for programmes other than Eco 50°C programme are indicative only. (#) Additional functions might cause changes in programme durations.
Programme number
Programme name
Cleaning temperature
Programme Table
Adjusting the water softening system
Washing, rinsing and drying performance of your dishwasher will improve when the water
softening system is adjusted correctly.
To adjust the system, first learn the water hardness in your region and adjust as indicated
below.
Quick Guide
After the determination of the water hardness:
1. While the Program Selection Knob is “Off”, press and hold the Start / Pause / Cancel key
and rotate the Program Selection Knob one step clockwise and keep the Start / Pause /
Cancel key pressed for 3 seconds; the machine shall switch to regeneration setting mode
after this period.
2. The regeneration level in the memory is illuminated for 5 seconds when you enter the
regeneration setting mode.
3. For setting a new Water Hardness Level, bring the Program Selection Knob to the
proper position for the hardness level of your mains water. (See Water Hardness Level
Setting Table)
4. Press the Start / Pause / Cancel key to record the selected setting in the memory.
5. Bring the Program selection knob to “Off” position.
1
2
53
4
Water hardness level setting table
Hardness
Level
English
Hardness °dE
German
Hardness °dH
French
Hardness °dF
Level of program
selection knob * Water Hardness Level Indicator
0. Level 0-5 0-4 0-8 1 The Washing light on the panel
illuminates.
1. Level 6-9 5-7 9-13 1
2. Level 10-15 8-12 14-22 2 The Drying light on the panel
illuminates.
3. Level 16-19 13-15 23-27 3 The End light on the panel
illuminates.
4. Level 20-24 16-19 28-34 4 The Washing, Drying and End lights
on the panel illuminate.
5. Level 25-62 20-50 35-90 5
The Washing, Drying and End lights
on the panel ashes with intervals of
1 second.


Product specificaties

Merk: Arcelik
Categorie: Niet gecategoriseerd
Model: 6133

Heb je hulp nodig?

Als je hulp nodig hebt met Arcelik 6133 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Arcelik

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd