Approx APPLS01 Handleiding

Approx Barcode lezer APPLS01

Lees hieronder de 📖 handleiding in het Nederlandse voor Approx APPLS01 (21 pagina's) in de categorie Barcode lezer . Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21

VERSION 1.0

appLS01

80mm.

Thermal printer

Introduction

Thank you for choosing the barcode reader APPLS01.

Product Description

The APPLS01 is a USB barcode reader with an ergonomic design that makes it easy to

handle. No drivers needed and automatically detected by the PC once connected. It is

congurable and supports more than 30 dierent keyboard layouts and includes LED and

buzzer to indicate dierent reading status. Reads the barcode at high speed and supports

up to 128 ASCII barcodes. It is 98% ecient. Includes support.

Make it your best tool for reading barcodes!

Package Contents

APPLS01

Support

Quick installation guide

Note: Make sure your package contains the elements described above. If you nd any

items are missing or damaged, please contact your dealer.

System Requirements

Computer with free USB port

Installation and Conguration

Connect the APPLS01 to a free USB port on your PC, the drivers will be installed

automatically.

To read a bar code, press the trigger and position the laser line over the code to be read.

Automatic function

To enable automatic press the trigger for 10 seconds you will hear a buzzer sound

issuing the following sound “di, di, di” which means that the auto start is enabled and the

reader can be used as automatic reader. When not using this function please press the

trigger for 10 seconds and the automatic feature will be disabled.

Conguration Using Bar Codes

Through scanning of the corresponding bar codes found below you can program the

barcode reader manually. Ensure only to scan one bar code at a time.

Exit Mode

Language Setting

Product specificaties

Merk:	Approx
Categorie:	Barcode lezer
Model:	APPLS01
Kleur van het product:	Zwart
Gewicht:	170 g
Breedte:	68 mm
Diepte:	158 mm
Hoogte:	96 mm
Gewicht verpakking:	350 g
Soort:	Draagbare streepjescodelezer
Connectiviteitstechnologie:	Bedraad
Type stroombron:	USB
Waarschuwingssignaal:	Ja
Type beeldsensor:	Laser
Ingangsspanning:	5 V
Oplaadstation:	Ja
Stroomverbruik:	20 mA
Ondersteunde streepjescodes (1D):	CPC Binary, Codabar, Code 11, Code 25 (IR 2 of 5), Code 39, Code 93, GS1-128 (UCC/EAN-128), JAN, MSI, U.P.C.
Standaard interfaces:	USB
Soort scanner:	1D
Stroomverbruik (typisch):	0.25 W
2D ( matrix en gestapeld ) barcodes ondersteund:	Niet ondersteund
Lees-snelheid (max):	100 lezingen/s
Werkafstand:	5 mm
Optische sensorresolutie:	4000000 Pixels
Maximale scan breedte:	650 mm