Apc Symmetra PX Power Module Handleiding

Bekijk gratis de handleiding van Apc Symmetra PX Power Module (2 pagina’s), behorend tot de categorie UPS. Deze gids werd als nuttig beoordeeld door 66 mensen en kreeg gemiddeld 4.9 sterren uit 2 reviews. Heb je een vraag over Apc Symmetra PX Power Module of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Symmetra® PX Power Module Replacement

See the Safety sheet (990-2984) provided with the unit for additional safety instructions.

Warning: Only trained persons familiar with the construction and operation of the

equipment, as well as the electrical and mechanical hazards involved, may install and

remove system components.

How to replace a power module

Warning: Before removing any power modules, make sure that the remaining power

modules can support the load.

Turn the locking latch until the arrow points down.

Unscrew the spring-activated knobs on both sidea of the module.

Pull the module up and out of the enclosure as far as the lock mechanism will allow.

Release the lock by pressing the black plastic tab on both sides of the module.

Pull the module out of the enclosure.

Push the replacement module into the enclosure.

Caution: Do not attempt to insert the power module using unnecessary force.

Tighten the spring-activated knobs on both sides of the module to ensure proper contact.

Use two people to lift components weighing between 18–32 kg (40–70 lb).

1

1

1

1











Product specificaties