Apc ER7HCM Handleiding

Apc Niet gecategoriseerd ER7HCM

Lees hieronder de 📖 handleiding in het Nederlandse voor Apc ER7HCM (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Installation 990–91454 Release date: 02/2021

Easy Rack 1U Horizontal Cable Manager ER7HCM

Kit Instructions

The 1U Horizontal Cable Manager is installed in a 1U space in the Easy Rack.

ER7HCM Inventory Tools required (not provided)

1U Horizontal Cable Manager (1)

Torx® wrench

M6 x 12 Pan Head T30 Screw (4)

Cage nut tool

Cage Nut M6 14/16 SWG (4)

Proper location in the rack for the cage nuts:

ns0014a

1. Locate the top and bottom U space on the

vertical mounting rails. Every third hole on

the mounting rails is numbered to indicate

the middle of a U space.

2. Install the cage nuts on the interior of the

vertical mounting rail; then install the shelf.

APC by Schneider Electric

70 Mechanic Street

02035 Foxboro, MA

USA

www.apc.com

As standards, specifications, and design

change from time to time, please ask for

confirmation of the information given in this

publication.

reserved.

Easy Rack 1U Horizontal Cable Manager ER7HCM

CAUTION

FALLING EQUIPMENT HAZARD

Do NOT install cage nuts vertically with the tabs engaging the top and bottom of

the square hole.

Failure to follow these instructions can result in injury or equipment

damage.

• Install cage nuts horizontally, with the tabs engaging

the sides of the square hole.

• Install the cage nuts on the interior of the vertical

mounting rail.

ns1768a

Install the cage nut:

gen0188a

1. From the inside of the rack, insert the cage nut into

the square hole.

2. Hook one tab of the cage nut assembly through the

far side of the hole.

3. Place the cage nut tool on the other side of the cage

nut and pull to snap into position.

Remove the cage nut:

1. Remove any attached screw.

2. Grasp the cage nut, squeeze the tabs on the sides, and push to release it from the square hole.

Install the Horizontal Cable Manager:

Using the hardware provided, install the four (4)

cage nuts in the vertical mounting rails of your

Easy Rack.

Use the four (4) M6 x 12 Pan head T30 screws

to secure the Horizontal Cable Manager to the

cage nuts.

2 990–91454

Product specificaties

Merk:	Apc
Categorie:	Niet gecategoriseerd
Model:	ER7HCM
Kleur van het product:	Zwart
Gewicht:	1000 g
Breedte:	483 mm
Hoogte:	45 mm
Breedte verpakking:	90 mm
Diepte verpakking:	570 mm
Hoogte verpakking:	70 mm
Soort:	Paneel voor kabelbeheer
Aantal per verpakking:	1 stuk(s)
Maat:	19 "
Compatibiliteit:	APC Easy Rack
Rackcapaciteit:	1U
Code geharmoniseerd systeem (HS):	85389099