Apc AP7532 Handleiding

Bekijk gratis de handleiding van Apc AP7532 (1 pagina’s), behorend tot de categorie Schakelaar. Deze gids werd als nuttig beoordeeld door 40 mensen en kreeg gemiddeld 4.9 sterren uit 2 reviews. Heb je een vraag over Apc AP7532 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

*990-2395*

990-239505/2005

Addendum — Rack PDU

Circuit Breaker Operation

How to reset a mid-tripped circuit breaker

The circuit breaker is at a mid-trip state when the

actuator is partially extended from the circuit

breaker, but not fully extended, as if it had been

turned off manually. Pushing the actuator in while

in mid-trip state will not reset the breaker. The

circuit breaker needs to be fully extended before it

can be reset. To fully extend the circuit breaker:

1.Insert a small slotted screwdriver or other tool

into the hole located above the word “OFF”.

2.Push the lower part of the actuator in gently

until the upper part “clicks” out.

How to reset a circuit breaker

The circuit breaker is ready to be reset when the

actuator is fully extended. Quickly and forcefully

push the circuit breaker actuator into the PDU to

reset the breaker.

pdu0346a

Note

Before resetting the circuit breaker you

should determine the cause of the fault

and remedy the fault before resetting

the circuit breaker. If the fault is not

removed, the breaker will trip again as

soon as it is reset.

pdu0345a

Product specificaties