Apc ACRD200 Handleiding

Apc Niet gecategoriseerd ACRD200

Lees hieronder de 📖 handleiding in het Nederlandse voor Apc ACRD200 (46 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/46

InRow® DX — Fluid-Cooled Air Conditioner

ACRD200, ACRD201

Installation Manual

990–3213E-001

Release Date: November 2021

www.se.com

Legal Information

The Schneider Electric brand and any trademarks of Schneider Electric SE and its

subsidiaries referred to in this guide are the property of Schneider Electric SE or its

subsidiaries. All other brands may be trademarks of their respective owners.

This guide and its content are protected under applicable copyright laws and

furnished for informational use only. No part of this guide may be reproduced or

transmitted in any form or by any means (electronic, mechanical, photocopying,

recording, or otherwise), for any purpose, without the prior written permission of

Schneider Electric.

Schneider Electric does not grant any right or license for commercial use of the guide

or its content, except for a non-exclusive and personal license to consult it on an "as

is" basis. Schneider Electric products and equipment should be installed, operated,

serviced, and maintained only by qualified personnel.

As standards, specifications, and designs change from time to time, information

contained in this guide may be subject to change without notice.

To the extent permitted by applicable law, no responsibility or liability is assumed by

Schneider Electric and its subsidiaries for any errors or omissions in the informational

content of this material or consequences arising out of or resulting from the use of the

information contained herein.

This manual contains general information, safety instructions, and guidance. Updates

may be published from time to time and are available upon request. This manual is

not a substitute for the user conducting a detailed operational and site-specific

development plan.

This product is for industrial use only. It should only be used for the functions for

which it has been designed as set out in this manual. User must evaluate and take

adequate precautions to address risks associated with use of this product in

environments and/or processes not specifically addressed in this manual (e.g. heavy

industry, medical, marine environments, railway, etc.).

This product should be installed, configured, used, serviced, maintained, replaced or

have similar work carried out on it only by suitably qualified, trained, experienced and

competent personnel who hold any necessary authorizations (e.g. licenses, permits

or certifications) to perform such work.User must ensure that all work is carried out in

compliance with the manufacturer’s instructions (including the product labels/

markings, technical specification manual, installation manual, and operation and

maintenance manual) and with all applicable laws, regulations, standards and

guidance (including standards and guidance applicable to the installation location).

All work must be carried out in a way that does not give rise to danger and using

appropriate personal protective equipment (PPE).

Schneider Electric shall not be responsible for any works carried out by anyone other

than Schneider Electric; or for integration or use of the product with other products

(including spare parts and software) that are neither approved nor provided by

Schneider Electric for such purposes; or for any non-Schneider Electric software,

firmware, information or memory data contained in, stored on, or integrated with this

product.

To the maximum extent permitted by applicable law, neither Schneider Electric nor

any of its affiliates shall be liable for any claims, costs, losses, damages, death or

injuries arising out of the improper use of this product or any failure to comply with

any of the above requirements.Schneider Electric’s quality management system is

ISO 9001 certified and the products are marked

ACRD200, ACRD201

Table of Contents

Safety............................................................................................................5

Important Safety Instructions — SAVE THESE INSTRUCTIONS....................5

Safety During Installation ............................................................................6

General Information....................................................................................7

Translation Reference.................................................................................7

Save These Instructions..............................................................................7

Manual Updates .........................................................................................7

Cross-Reference Symbol Used in This Manual .............................................7

Receiving and Inspecting the Equipment................................................8

Filing a Claim .............................................................................................8

Environmental Considerations.....................................................................8

Pressurized Equipment...............................................................................8

Radio Frequency Interference .....................................................................9

California Proposition 65—Warning Statement for California

Residents ..................................................................................................9

Storing the Cooling Unit Before Installation ..........................................10

Moving the Unit ......................................................................................... 11

Model Identification...................................................................................12

Component Identification.........................................................................13

Installing Kit .............................................................................................13

External Components (Front) ....................................................................14

Internal Components (Front)......................................................................15

Internal Components (Rear) ......................................................................16

Electrical Panel ........................................................................................17

Top Piping and Power Access Locations .................................................... 18

Bottom Piping and Power Access Locations..........................................18

Piping Diagrams .......................................................................................19

Connections...............................................................................................21

Power connections ................................................................................... 21

Wiring Cross-Section Ratings ..............................................................21

Piping Connections...................................................................................22

Room Preparation.....................................................................................23

Weights and Dimensions...................................................................... 24

Installation..................................................................................................25

Removing Doors and Panels .....................................................................25

Positioning the Equipment .....................................................................26

Service Access ...................................................................................26

Leveling the Equipment .......................................................................27

Stabilizing the Equipment .................................................................27

Joining the Equipment to Enclosures ....................................................28

Mechanical Connections..........................................................................29

Liquid Piping ............................................................................................29

Condensate Pump.................................................................................... 29

Leak Sensor (optional) ..............................................................................31

Electrical Connections..............................................................................33

Control Connections .................................................................................33

990-3213E-001 3

Product specificaties

Merk:	Apc
Categorie:	Niet gecategoriseerd
Model:	ACRD200
Kleur van het product:	Zwart
Gewicht:	199090 g
Gewicht verpakking:	237270 g
Soort:	Vrijstaande rek
Afmetingen verpakking (BxDxH):	746 x 1137 x 2118 mm
Certificering:	cUL Listed, C-tick, CE, UL Listed
Afmetingen (B x D x H):	300 x 1070 x 1991 mm
Rackcapaciteit:	42U
AC-ingangsspanning:	208 - 230 V
AC-ingangsfrequentie:	60 Hz
Luchtcirculatie:	2290 CFM
Koelmiddel:	R410A