Apc ACCS2005 Handleiding

Bekijk gratis de handleiding van Apc ACCS2005 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.1 sterren uit 7 reviews. Heb je een vraag over Apc ACCS2005 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

990-91538 10/2021

© 2021 Schneider Electric. All rights reserved.

Worldwide Customer Support

Customer support and warranty information is available at

www.se.com

Air Containment Adapter Kits

(300mm) Installation

ACCS2004 - ACCS2005 - ACCS2006 - ACCS2007

ACCS2004 and ACCS2005 compatible with ACRD101, ACRD301

ACCS2006 and ACCS2007 compatible with ERC301CW

IMPORTANT SAFETY INSTRUCTIONS

Receiving

Inspect the Equipment

Carefully inspect the shipment for visible signs of damage. If you detect shipping

damage, contact your shipping company immediately and Schneider Electric Customer

Support at www.se.com.

Storage

These components should be stored indoors and out of the weather. Do not allow the

panels to be exposed to the elements.

CAUTION

HEAVY EQUIPMENT HAZARD

• The kit components are heavy. Use caution when lifting.

• Wear appropriate personal protective equipment (PPE) and follow safe work

practices.

Failure to follow these instructions can result in injury or equipment damage.

NOTICE

• Leaving the kit components uncovered and exposed to the elements will cause

damage and void the factory warranty.

• Wipe the panels with a damp cloth to clean. Do not use solvents or abrasive

cleaners.

Inventory

ItemDescriptionQty

 Adapter side frame with door hinges1

 Grounding Wire

1 inside adapter door, 1 on inside rear of hinge side adapter frame.

2

 Adapter door handle side frame 42U1

 ACCS2004 Door 1

 Door Handle (installed on doors) 2

 ACCS2006 Door 1

 Door (Rear adapter kits) 1

 Adapter top 1

 Adapter bottom 1

 EVA foam seal 2.0 x 20 x 2000 (mm)1

 Display RJ45 connector adapter (for use with ACRD101 only)1

 Display interface connector cable (for use with ACRD101 only)2

 M6 flanged hex nut8

 Washer M6 serrated2

 Washer Nylon ID 6 PD 12 6

 M5 flanged hex nut1

 Screw M6 x 12 Pan head T30 Nylok6

 Screw M8 x 12 Flat head Nylok T30 4

 Screw M5 x 10 Pan head T253

 Screw M6 x 12 Pan head T301

Recycle or dispose of the packaging materials appropriately.

ns3367a

Tools Required (not provided)

Prepare the Cooling Unit

Each kit contains the parts for one (front or

rear) installation.

Refer to your cooling unit’s manual for in-

structions for the below tasks.

1. Disconnect the cable from the

display interface.

2. Remove the front and rear doors from the

cooling unit.

3. Remove the hinges from the

cooling unit, if applicable.

NOTE: 1. In existing rows of racks, the

joining brackets securing the racks and

cooling units together on the front side are

not removed.

2. All racks in the row must be level and

secured together with the joining brackets (at

the front) prior to installing the air

containment adapters.

T25 and T30 Torx

head screwdrivers

8-mm, 10-mm, 13-mm

wrenches

ScissorsLevel

ns3371a

Product specificaties