Apart H20-G Handleiding

Bekijk gratis de handleiding van Apart H20-G (1 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 20 mensen en kreeg gemiddeld 4.8 sterren uit 9 reviews. Heb je een vraag over Apart H20-G of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SETTING POWERIMPEDANCE

12.5 WATTS4K Ω

25 WATTS2K Ω

310 WATTS1K Ω

420 WATTS500 Ω

5 OFFOFF

620 WATTS8 Ω

●Type : Compression driver horn speaker

● Material : high impact ABS

● Standard colour : gray RAL7035

● Rated power RMS : 20 W / 100 volt

● Music power RMS : 30 W / 100 volt

● Transformer power taps by rotary switch :

2.5 – 5 – 10 – 20 W / 100volt

● Rated power RMS : 20 W / 8 ohm

● Music power RMS : 30 W / 8 ohm (lo-cut)

● Impedance: 100 volt / 8 ohm

● Cable length : approx. 40 cm

● Dimensions Outside Ø : 200 mm x length : 232 mm

● Weight including bracket : 1.36 Kg

● Mounting holes : 3 x Ø 6.5 mm

The H20 is a powerfull weatherproof industrial horn loudspeaker with compression driver.

This hornspeaker offers you a high sound pressure ideally suited for speech and the repro-

duction of alarm signals. Ideal for long-distance and outdoor use. The H20 is made out of high

impact ABS, supplied with a stainless steel bracket to avoid corrosion. The loudspeaker is

equipped with a high quality 100 volt transformer with several power taps, and can be used

in 8 ohm systems as well. The APart technology avoids any overload of your amplier by

controlling the impedance with the unique IMC protection device inside.

2020 101055 2.5 2.5+

++++++75 Watt=

120Watt Amplier

Amplier power must be higher than total power of all speakers.

Het versterkervermogen moet hoger zijn dan de som van de vermogens van de luidsprekers.

La puissance de l’amplicateur doit etre plus élevée que la puissance totale des haut parleurs.

A stainless steel mounting bracket for mounting is included in the packing. The bracket allows you to rotate the speaker

over a range of more than 180 degrees. Securely mount the bracket to a wall or other solid surface. Connect the

speaker line with the included speaker wire and make sure that all connections are weather proof. The desired power

can be selected with the rotary switch at the back of the unit.

H20-G_Manual.indd 111/5/08 11:28:50 AM

Product specificaties