Anton/Bauer PowerTap Kit Handleiding

Anton/Bauer Stekkerdoos PowerTap Kit

Bekijk gratis de handleiding van Anton/Bauer PowerTap Kit (6 pagina’s), behorend tot de categorie Stekkerdoos. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.3 sterren uit 6 reviews. Heb je een vraag over Anton/Bauer PowerTap Kit of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/6
Mobile Power. Perfected.
Department Approvals Date
ENG Mech.
ENG Elec.
Marketing
7595-0060
RevisionG
PowerTap Kit
Installation Instructions
APPROVED
C. v VLIERDEN 12/30/14
M. MRAZIK 12/30/14
D. GALLI 12/15/14
TABLE OF CONTENTS
1 IMPORTANT
WHAT’S INCLUDED
2-3 INSTALLATION INSTRUCTIONS
APPROVED
1
IMPORTANT
READ AND UNDERSTAND THIS MANUAL BEFORE OPERATION
The Anton/Bauer PowerTap® Connector allows the direction of the
PowerTap Cable to exit from the opposite side of the Connector
Housing, thus providing a more convenient method by which to
dress the PowerTap Cable on specic applications.
IMPORTANT: PLEASE TAKE NOTE OF CABLE POLARITY
Reversing the PowerTap Cable exit location (per instructions
contained in this document) will also reverse the polarity of the
corresponding connector or un-terminated wires. Equipment
damage may be caused if proper cable polarity is not observed.
Use the polarity markings located on the PowerTap Connector
Housing to verify correct equipment cable polarity.
Example: XLR-4 Connector: Pin 1 (-) negative to (+) positive polarity,
Pin 4 (+) positive to (-) negative polarity, OR (+) positive agged wire
to (-) negative polarity
Contact Anton/Bauer Field Support at (203) 925-4991 or
support@antonbauer.com with any questions regarding this product.
WHAT’S INCLUDED
Your purchase of the PowerTap Kit will include the following:
P-TAP FRONT
QTY 1
P-TAP BLANK
QTY 1
P-TAP BACK
QTY 1
2-56 PAN HEAD SCREW
QTY 1
NUT 2-56
QTY 1
STRAIN RELIEF
QTY 1
BANANA PIN
QTY 2
APPROVED


Product specificaties

Merk: Anton/Bauer
Categorie: Stekkerdoos
Model: PowerTap Kit
Kleur van het product: Zwart
Snoerlengte: 0.35 m
Aansluiting(en): PowerTap FS4
Aantal AC uitgangen: - AC-uitgang(en)

Heb je hulp nodig?

Als je hulp nodig hebt met Anton/Bauer PowerTap Kit stel dan hieronder een vraag en andere gebruikers zullen je antwoorden