Anton/Bauer NM 38 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Anton/Bauer NM 38 (10 pagina's) in de categorie Accu. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
One World. One Smart Choice.™
Owner’s Manual
NM14/19
& 28/38
A7595-0366 Rev C
®
Approved Copy
TABLE OF CONTENTS
1 INTRODUCTION
1-2 NM 14/19 BATTERY MODULE DISASSEMBLY
3 NM 14/1919 BATTERY MODULE ASSEMBLY
4-5 NM 28/38 BATTERY DISASSEMBLY
5-6 NM 28/38 BATTERY ASSEMBLY
7 LIMITED WARRANTY
Approved Copy
1
INTRODUCTION
The CINE VCLX series of batteries are designed and manufactured to the high quality expected from all Anton/Bauer batteries. Because of the
specialized and proprietary circuitry that is used in these batteries, the cells inside of any CINE battery must be replaced with an NM14/19 or
NM28/38 module.
The NM14/19 and NM28/38 modules eliminate the need for “re-celling”, long waiting periods and unnecessary shipping of the CINE
® batteries.
The old battery module is simply removed with a few screws, the connectors are unplugged, and the new module is inserted. Then, the old
module can simply be recycled.
The NM14/19 module is the cell replacement module for the CINE VCLX/2 batteries. Please follow the instructions in this manual to ensure
safe and reliable installation. (Note: the NM14/19 module is not for use with the CINE VCLX, and CINE VCLX-CA batteries.)
The NM28/38 module is the cell replacement module for the CINE VCLX and CINE VLCX-CA batteries. As mentioned above, please follow the
instructions in this manual to ensure safe and reliable installation. (Note: The NM28/38 module cannot be used with the CINE VCLX/2 batter-
ies.)
If you have any questions or concerns, please contact our customer support group at support@antonbauer.com or if inside the U.S. at (800)
541-1667.
STEP 1
Remove the (2) #10 screws and (2) # 10 washers as shown in gure A.
Note: Do not remove handle or handle hardware from side plates.
STEP 2
Remove the (4) 6-32 screws and (4) 6-32 washers as shown in gure B.
NM 14/19 BATTERY MODULE DISASSEMBLY OF UNIT
Figure A Figure B
#10
screw
QTY 2
6-32
screw
QTY 4
Approved Copy


Product specificaties

Merk: Anton/Bauer
Categorie: Accu
Model: NM 38
Capaciteit van de accu/batterij: - mAh
Accu/Batterij voltage: - V
Type product: Batterij/Accu

Heb je hulp nodig?

Als je hulp nodig hebt met Anton/Bauer NM 38 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Accu Anton/Bauer

Handleiding Accu

Nieuwste handleidingen voor Accu