Anker Soundcore Flare 2 Handleiding

Anker Luidspreker Soundcore Flare 2

Lees hieronder de 📖 handleiding in het Nederlandse voor Anker Soundcore Flare 2 (79 pagina's) in de categorie Luidspreker. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/79
EN 01 02 EN
Safety Instructions
Avoid dropping.
Do not disassemble.
Avoid extreme temperatures.
Do not use the product outdoors during thunderstorms.
Use original or certied cables.
Do not use any corrosive cleaner/oil to clean.
Do not expose batteries to heat sources such as direct sunlight, re and or the like.
At a Glance
1 4
2
3
5
7
6
1Light effects button 5Bass Boost button
2Power button 6Bluetooth & PartyCast button
3Volume buttons ( - / +) 7USB-C charging port
4Multi-function button
Charging
Use the included USB cable to charge your speaker and make sure it is fully
charged before rst use.
Do not charge your speaker for extended periods.
When not in use, store your speaker in a cool place.
Powering On/Off
ON
<2”
OFF
>2”
Power on Press
Power off Press and hold for 2 seconds
EN 03 04 EN
Bluetooth Pairing
FLARE 2
1
<2”
Soundcore Flare 2
2
Soundcore Flare 2
Soundcore Flare 2
3
Soundcore Flare 2
FLARE 2 FLARE 2
Press Enter Bluetooth pairing mode
Flashing blue Bluetooth pairing
Steady blue Bluetooth connected
When powered on, the speaker will automatically connect to the last connected
device if available within the Bluetooth range. If not, press the Bluetooth button
to enter the Bluetooth pairing mode.
To pair with another device, press the Bluetooth button to re-enter the pairing
mode.
PartyCast Mode
Set up one Flare 2 as the primary speaker and connect it with more than 100+ secondary Flare
2 speakers to control audio and all the light effects.
Set up the primary speaker:
1. Connect one Flare 2 speaker to your phone or other devices via Bluetooth. When
successfully connected, the Bluetooth LED will turn blue.
2. Press and hold the Bluetooth button on this Flare 2 for 3 seconds until you hear a sound and
the Bluetooth LED ashes white to indicate this Flare 2 is the primary speaker.
The Bluetooth LED on the primary speaker will keep ashing white.
Connect with secondary speakers:
1. Make sure the secondary speakers aren't connected to any Bluetooth devices.
Press the Bluetooth button to disconnect Flare 2 from a device, the Bluetooth
LED will ash blue.
2. Press the Bluetooth button for 3 seconds until you hear a sound and the Bluetooth LED
ashes white to indicate the secondary speaker is in connection mode.
3. When the secondary speakers are close to the primary speaker, they will connect to the
primary speaker automatically. When successfully connected, the Bluetooth LED on the
primary speaker will continue ashing white, while on the secondary speakers will turn white.
1
FLARE 2
2
FLARE 2
>3”
FLARE 2
FLARE 2
FLARE 2
FLARE 2
When successfully enter the PartyCast mode:
you can power off, adjust the volume, or switch light effects for all speakers by controlling
the primary speaker only;
you can power off or switch light effects for each secondary speaker individually;
you can't adjust the volume for each secondary speaker individually;
to exit the PartyCast mode, press the Bluetooth button either on the primary speaker or
on the primary speaker for 3 seconds until the Bluetooth LED ashes blue.
Button Controls
Play / Pause X1 Press
Next track X2 Press twice
Previous track X3 Press thrice
Bass Boost On / Off X1 Press


Product specificaties

Merk: Anker
Categorie: Luidspreker
Model: Soundcore Flare 2

Heb je hulp nodig?

Als je hulp nodig hebt met Anker Soundcore Flare 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Luidspreker Anker

Handleiding Luidspreker

Nieuwste handleidingen voor Luidspreker