AMX MXA-RMK-20 Handleiding

AMX Niet gecategoriseerd MXA-RMK-20

Lees hieronder de 📖 handleiding in het Nederlandse voor AMX MXA-RMK-20 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

QUICK START GUIDE

MXA-RMK-20 Rack Mount Kit for 20.3" Modero X Series Landscape Touch Panel

Overview

The MXA-RMK-20 Modero X Series® Rack Mount Kit (FG5969-60) is an optional accessory for

the MXD-2000XL-PAN 20.3” Modero X Series Panoramic Wall/Flush Mount Touch Panel

(FIG. 1). The kit allows the touch panel to be mounted directly on an equipment rack, and

includes a rack mount frame, screws and washers.

Product Specif ications

Installation of the MXA-RMK-20

The MXA-RMK-20 offers a stable installation mount for the MXD-2000XL-PAN through the

panel’s Back Box.

NOTE: The MXA-RMK-20 Rack Mount Kit may only be used with the landscape mount of the

MXD-2000XL-PAN touch panel (FG5968-11). It cannot be used with the portrait mount of the

MXD-2000XL-PAN.

NOTE: All doors, covers, and other obstacles preventing installation of the Rack Mount Kit should

be removed before installation is attempted. Due to the size of the Modero X Series panel, it may

not be possible to close racks that contain a rack door, once installation is complete.

To install the MXA-RMK-20:

1. Secure the Rack Mount Panel to the rack with #10 screws. Make sure that the

installation flanges (FIG. 2 and FIG. 3) face away from the front of the rack. The thinner

flange of the Rack Mount Panel should be at the top (FIG. 1).

2. Insert the Back Box into the Rack Mount Panel, making sure that the Back Box is in the

correct orientation. The standups on the installation flanges will pass through the Back

Box and help anchor it in place.

3. Pass a washer through a #6 screw and insert it in a standup screw hole (FIG. 2). Repeat

this procedure at each corner of the Back Box.

WARNING: The maximum recommended torque to be used on the Back Box installation

screws is 5 IN-LB [56 N-CM]. Applying excessive torque while tightening the screws, such

as with powered screwdrivers, can strip out the screw holes or damage the plastic back

box.

4. With the Back Box anchored in the Rack Mount Panel (FIG. 4), you may now install the

MXD-2000XL-PAN into the Back Box.

NOTE: For more information on installing the MXD-2000XL-PAN into its back box, please refer to

the MXD/T-2000XL-PAN Operation Reference Guide, available from www.amx.com.

FIG. 1 MXA-RMK-20 MODERO X SERIES RACK MOUNT KIT

MXA-RMK-20 RACK MOUNT KIT (FG5969-60) SPECIF ICATIONS

Dimensions

(HWD):

10.47” x 21.00” x 2.09” (26.59 cm x 53.34 cm x 5.31 cm)

Weight: 4.30 lbs (1.95 Kg)

Included

Accessories:

• MXA-RMK-20 Installation Guide (93-5969-60)

• Rack Mount Panel, 20.3" Modero Wall Touch Panel (62-5968-46)

• Screws, #10-32 PFH 1.75" Long, Black (4) (80-5968-01)

• Screws, #6-32 x .375, PPH, Black (4) (80-0138)

• Washers, #6, Flat, 3/8 Diameter, .03 Thick, Stainless Steel (4) ( )80-0322-01

Other AMX

Equipment:

• MXD-2000XL-PAN 20.3” Modero X Series Panoramic Wall Touch Panel,

Landscape Mount (FG5968-11)

21.00” (53.34 cm)

10.47”

(26.59 cm)

2.09”

(5.31 cm)

Front View

Top View

Side View

10.47”

(26.59 cm)

2.09”

(5.31 cm)

Installation

Flanges

Standups

FIG. 2 INSTALLATION OF THE BACK BOX INTO THE MXA-RMK-20, FRONT VIEW

FIG. 3 INSTALLATION OF THE BACK BOX INTO THE MXA-RMK-20, REAR VIEW

FIG. 4 FINAL ASSEMBLY OF THE MXA-RMK-20 WITH BACK BOX

Installation

Flange

Screws

Washers

Installation

Flange

Screws

Washers

Rack Mount Panel

Back Box

Bottom Flange

trademarks of HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their

respective companies.

AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.

The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153

AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/

93-5969-60 REV: B

Last Revised: 11/12/2015

A Note About Wall and Rack Installation

Some products are installed in areas of differing temperature and cooling methodologies.

These include products installed in walls, racks, cabinets, etc. Those areas may have different

temperatures and/or cooling approaches that must be taken into consideration to maintain

the product within the specified operating temperature.

FIG. 5 shows an AMX device installed in a wall with a filled volume (such as with insulation or

concrete), as well as with a closed volume (such as between studs in an otherwise finished

wall). The diagram shows how heat generated by the device or other devices may have no way

to escape, and may build up to levels that may affect device operation.

In FIG. 6, the diagram displays an AMX device in a typical rack mounting, with full air

circulation around the front and back of the device. In this case, the main concern is with heat

building up between components, possibly to levels that may affect device operation.

Installation Recommendations

During any installation, a lack of ventilation may produce conditions that may adversely affect

the device’s operation. In these circumstances, special care must be made to make sure that

temperatures within enclosed areas do not exceed the device’s maximum rated temperature.

FIG. 5 HEAT CONVECTION IN FILLED OR CLOSED VOLUME, LIMITED OR NO CONVECTION

FIG. 6 HEAT CONVECTION IN RACK-MOUNTED DEVICES

Product specificaties

Merk:	AMX
Categorie:	Niet gecategoriseerd
Model:	MXA-RMK-20
Kleur van het product:	Zwart
Gewicht:	1950 g
Breedte:	533.4 mm
Diepte:	53.1 mm
Hoogte:	265.9 mm
Montagewijze:	Muur
Geschikt voor schermmaten:	20.3 "
Compatibiliteit:	MXD-2001-PAN-L, MXD-2001-PAN-L, MXD-2000XL-PAN-L-NC
Aantal displays ondersteund:	1