Amerock H55445ORB Handleiding
Pagina's 3 Kapstok
Bekijk de handleiding van Amerock H55445ORB gratis online of download de PDF. Deze handleiding is 23 keer bekeken. Vraag over dit model? Stel een vraag
Installing New Cabinet Hardware
Step 1.Location of Cabinet Hardware
While there are no hard, fast rules for placement of a knob or pull on a cabinet door, most cabinet makers will locate them
approximately 3"-4" above the upper non-hinged corner on base cabinets, or the lower non-hinged corner on wall cabinets.
However, the decision is your to make!
Wall CabinetsBase Cabinets
Wall or
Base Cabinets
Drawers
Step 2.Mounting Cabinet Hardware
When drilling for a knob or pull, a 3/16" hole is recommended for most styles. The exception is pulls that have "studs".
A stud is simply an extension of the molded screw holes. If a pull has a stud, then a 1/4" hole is required with studs sitting
securely in the wood.
IMPORTANTScrew Information
Amerock
®
includes 8-32 x 1" long machine screws with most knobs and pulls because the typical cabinet door or drawer front
is 3/4" thick. This screw length should work in most applications. However, if your cabinet doors or drawer fronts are thicker
than 3/4", then you will need to use longer screws for mounting. Check the thickness of both a cabinet door and a drawer front
in your kitchen, as the thickness dimensions may not be the same. In general, the screw length(s) used should be 1/4" longer
than the thickness of your cabinet door or drawer front material. It is not uncommon for some drawers to be constructed with a
3/4" thick front attached to a 3/4" thick drawer box. In this situation, the total drawer thickness is 1-1/2", making a 1-3/4" long
screw necessary for mounting. These screws may be purchased from any hardware store. Please note that select hardware sold
by Amerock may include metric screws instead of UNC screws.
Product specificaties
| Merk: | Amerock |
| Categorie: | Kapstok |
| Model: | H55445ORB |
Heb je hulp nodig?
Als je hulp nodig hebt met Amerock H55445ORB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden