American International TOYK996 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor American International TOYK996 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
0.10 .1 0 .10.1
TOYK996 Mounting Kit
Scion
2012 IQ
2013 FR-S
VEHICLE APPLICATIONS
©2013 AMERICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver. 3/13 PRINT Ver. 5/12
2
DIN MOUNT INSTRUCTIONS
1. Attach ISO mount brackets to rear of kit as shown in illustration B and attach to rear of
pocket using small screws provided with kit.
2. Insert DIN sleeve from your new radio into the upper section of the installation kit
(See Fig A below).
3. Depress the tabs from inside the sleeves opening upward, outward, and downward
to secure sleeve to the installation kit.
4. Install radio into sleeve and lock into place.
5. SUGGESTED…Support rear of radio with back strap.
ITP 975
Fig A
ISO MOUNT INSTALLATION INSTRUCTIONS
Not e: Some radio faces are larger in size than the ITP-975 Trim Ring allows.
You may need to file the opening larger for some radios.
1. Attach ISO mount brackets to rear of kit as shown illustration B and attach to rear of
pocket using small screws provided with kit,and insert spacers into both brackets.
2. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible or large wafer head screws
supplied with kit. (Be sure the length of the screws DO NOT touch any electrical parts
inside radio, some screws may need to be shortened.)
3. Attach ISO trim ring to face of kit.
4. Slide radio forward or backward
for desired look and tighten screws.
0.10.10.10.1
3
1. Carefully unclip and remove the panel with ac vents from around the hazard button.
Unplug hazard button.
2. Carefully unclip and pry forward the radio trim housing. Do not unplug Airbag light.
3. Place the housing on the dash(you can use something to protect the dash)
while installing new radio.
5. Remove the (4) 10mm bolts securing the radio to the sub-dash.
6. Pull radio forward, disconnect the attached wire harness and antenna lead
and remove radio.
DASH DISASSEMBLY
2012 SCION IQ
1. Carefully unclip and remove the panel surrounding the radio.
2. Remove the (4) 10mm bolts securing the radio to the sub-dash.
3. Pull radio forward, disconnect the attached wire harness and antenna lead
and remove radio.
DASH DISASSEMBLY
2013 FR-S
KIT ASSEMBLY
FOR ISO or DIN MOUNT APPLICATIONS.
2013 FR-S
2012 IQ
0.0.0.
Remove shaded left
and right brackets.
Remove shaded left
and right brackets.


Product specificaties

Merk: American International
Categorie: Niet gecategoriseerd
Model: TOYK996

Heb je hulp nodig?

Als je hulp nodig hebt met American International TOYK996 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd American International

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd