American International SBK931GB Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor American International SBK931GB (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
iSBK931GB
VEHICLE APPLICATION
Subaru
2018 Crosstrek
2017-18 Impreza
www.aampglobal.com www.aius.net
2500 East Francis Street Ontario, CA 91761, U.S.A.
Sales: (800) 477-2267
Intl: (727) 572-9255
Support: 888-228-5560
©2018 AMERICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver. 6/18 PRINT Ver. 6/18
SBK931GB Mounting Kit
DASH DISASSEMBLY INSTRUCTIONS
1. Using a soft tool carefully unsnap and remove the air vents on both sides of the radio.
2. Unsnap and remove the trim bezel above the factory radio.
3. From the radio mounting brackets Remove (4) Phillips screws securing the radio, remove.
4. Remove (4) panel clips from the OEM radio panel. Save for kit assembly.
23
DOUBLE DIN INSTALLATION INSTRUCTIONS
Figure A
KIT ASSEMBLY INSTRUCTIONS
Single ISO Mount Application
1. Reinstall the (4) panel clips left over for disassembly to the rear of the
SBK931GB main panel.
2. Insert pocket into lower section of the brackets.
3. Install brackets to rear of main frame using the (2) screws provided, hooking bottom of
 bracketstomainpanelrst
4. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible, or screws supplied with kit.
5. Using the main frame of the as a guide, slide radio forward or backward for desired
look and then tighten screws to the radio.
Double DIN ISO Mount Application
See Fig B for bracket tab removal.
1. Reinstall the (4) panel clips left over for disassembly to the rear of the SBK931GB
main panel.
2. Remove pocket support tabs from both brackets.
3. Install brackets to rear of main frame using the (2) screws provided, hooking bottom of
 bracketstomainpanelrst
4. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible, or screws supplied with kit.
5. Using the main frame of the as a guide, slide radio forward or backward for desired
look and then tighten screws to the radio.
Figure B Remove shaded tabs
on left and right sides
of the brackets
(Right side not shown)


Product specificaties

Merk: American International
Categorie: Niet gecategoriseerd
Model: SBK931GB

Heb je hulp nodig?

Als je hulp nodig hebt met American International SBK931GB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd American International

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd