Ambient Weather FT012TH Handleiding

Bekijk gratis de handleiding van Ambient Weather FT012TH (7 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.1 sterren uit 4 reviews. Heb je een vraag over Ambient Weather FT012TH of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Page 1

F012TH Wireless Indoor Thermo-Hygrometer User Manual

1.Introduction

Thank you for your purchase of the F012TH Wireless Indoor Thermo-Hygrometer. The following user

guide provides step by step instructions for installation, operation and troubleshooting.

2.Getting Started

Note: The power up sequence must be performed in the order shown in this section (insert batteries

in the remote transmitter(s) first, Display Console second).

Indoor Thermo-Hygrometer Sensor Set Up

1.Remove the battery door on the back of the display, as shown in Figure 1. Insert two AAA

(alkaline or lithium, avoid rechargeable) batteries in the back of the indoor sensor.

Figure 1

After inserting the batteries, All of the LCD segments will light up for a few seconds to verify all seg-

ments are operating properly. and then icon flash once per 60 seconds thereafter. Each time it flashes,

the sensor is transmitting data.

2.Verify the correct channel number (CH) and temperature units of measure (°F vs. °C) are on

the display, as shown in Figure 2.

Product specificaties