Ambiano VS-100 Handleiding


Pagina's 2 Vacuumverpakker

Bekijk de handleiding van Ambiano VS-100 gratis online of download de PDF. Deze handleiding is 2 keer bekeken. Vraag over dit model? Stel een vraag

5
21
46
3
U MseranUal
Manualdelusuario
M C h Cadeinhina·eChoenhina
A S S • S p fterAleSupporterviciooSventA
US
ServiceuSprotelServicecom-@-.
m/m: vS-100 03/2027odelodelo
o i m · m riginAlnStructionAnuAlAnuAldeluSuAriooriginAl
Dist. & s olD
ExclusivElyy B
DistriBuiDo y
vEnDiDoEorma D F
Exclusivaor P
alDi
BAtAviA,
il 60510
VacUUMealer s
V01025⁄6
• To reduce the risk of electric shock, this product has a polarized plug (one blade is wider than other). This plug is intended to fit in a polarized
outlet only one way. When the plug does not fit fully in the outlet, reverse the plug. When it still does not fit, contact a qualified electrician to
install the proper outlet. Do not change the plug in any way.
2.5 e xtenSioncordinStruction
• a) A short power-supply cord (or short detachable power-supply cord) is provided to reduce the risks resulting from becoming entangled in or
tripping over a longer cord.
• b) Extension cords (or longer detachable power-supply cords) are available and are not prohibited from being used when care is exercised in
their use.
• c) When an extension cord is used:
1) The marked electrical rating of the detachable power-supply cord or extension cord shall be no less than the marked electrical rating of
the product;
2) When the product is of the grounded type, the extension cord shall be a grounding type 3-wire cord; and
3) The longer cord shall be arranged so that it does not drape over the counter-top or tabletop where it is capable of being tripped over,
snagged, or pulled on unintentionally.
NOTICE! ELECTROMAGNETIC INTERFERENCE (ESD)!
»Electrostatic discharge (ESD) may cause the product to shut down or the electronics to malfunction. Should this occur, unplug the power
cord from the outlet and reinsert it. This behavior is a normal, allowable operating condition under electromagnetic interference and does
not indicate a product defect.
3 i snitialEtuP
3.1 c p checktheroductAndontentS
NOTE! RISK OF DAMAGE!
»Carelessly opening the packaging with a sharp knife or other pointed objects can easily damage the product.
−Be very careful when opening.
1. Remove the product from the packaging.
2. Check if the product or its components are damaged. If so, do not use the product. Contact the manufacturer at the service address provided
on the warranty card.
3. Ensure that all items are included in the delivery
3.2 S u pettingptheroduct
• Place the product in an area that provides enough space to insert a vacuum seal bag. Do not position the product directly in front of a wall or
other objects.
• If using a roll of film, cut the needed bags to size (refer to the “Using a Roll of Film” section).
• Unwind the power cord from the cord compartment on the bottom of the product and lead it through the notch at the back of the
product. Plug it into a properly installed outlet (110 – 120 V~, 60 Hz).
• Only parts that correspond to the original specifications of the device should be used for repairs. This vacuum sealer contains electrical and
mechanical parts essential for protection against hazards.
• Do not operate the vacuum sealer with an external timer or a separate remote control system.
• Do not immerse the vacuum sealer, power cord, or plug in water or other liquids.
• Never touch the plug with wet hands.
• Do not perform other activities on the vacuum sealer during operation (such as cleaning).
• Always hold the plug when unplugging it, never pull on the power cord.
• Never use the power cord as a handle.
• Keep the vacuum sealer, the plug, and the power cord away from open fire and hot surfaces.
• Route the power cord so that it does not become a tripping hazard.
• Do not bend the power cord or lay it over sharp edges.
• Use the vacuum sealer only indoors. Never operate it in damp rooms.
• Never store the vacuum sealer in a way that it could fall into a tub or sink.
• Never reach for the vacuum sealer if it has fallen into water. In such cases, immediately unplug it.
• Ensure that children do not insert objects into the vacuum sealer.
• When not using the vacuum sealer, or if cleaning it or a malfunction occurs, always turn off the vacuum sealer and unplug it from the outlet.
• Do not vacuum liquids; this can damage the vacuum sealer.
WARNING! RISK OF INJURY! RISK OF BURNS!
»Hazards for children and individuals with reduced physical, sensory, or mental abilities (e.g., partially disabled persons, elderly individuals
with limitations in physical and mental abilities) or lack of experience and knowledge (e.g., older children).
• The vacuum sealer is not a toy! Improper operation of the device can lead to significant bodily injuries, particularly burns and cuts.
• During operation, very high temperatures are generated at the sealing wire of the vacuum sealer. The sealing wire can also be very hot even
when the housing cover is open. To avoid burns, do not touch the sealing wire.
• The knife of the cutting unit is sharp! Please be careful not to touch the knife!
WARNING! RISK OF PINCHING!
»Improper operation of the vacuum sealer can lead to pinching injuries!
• To avoid pinching, make sure that no fingers are caught when closing the vacuum sealer.
WARNING! RISK OF ELECTRIC SHOCK!
• Do not vacuum liquids! Suctioning can cause liquids to reach the interior of the device and thus come into contact with voltage-carrying parts.
• Do not seal liquids! The liquid can enter the interior of the device and thus come into contact with voltage-carrying parts.
WARNING!
»Hazards to Children and Individuals with Reduced Physical, Sensory, or Mental Capabilities (for example, partially disabled individuals,
elderly persons with limitations in their physical and/or mental abilities) or lack of experience and knowledge (such as older children).
• This vacuum sealer may be used by children aged eight and older and by persons with reduced physical, sensory, or mental capabilities or lack
of experience and knowledge, provided they are supervised or have been instructed on the safe use of the vacuum sealer and understand the
resulting hazards.
• Children must not play with the vacuum sealer.
• Cleaning and user maintenance must not be performed by children without supervision.
• Keep children under the age of eight away from the vacuum sealer and its power cord.
• Do not leave the vacuum sealer unattended during operation and do not engage in other activities while it is in use.
• Do not allow children to play with the packaging film. Children can become entangled in it and suffocate.
• Do not allow children to play with the vacuum seal bags and the roll of film. Children can become entangled in them and suffocate.
4 P oroDuctvErviEw
Housing Cover Seals (2x)
Cable Compartment (underside of the product) Suction Nozzle
Seal Button
Seal Indicator Rubber Strip
Normal Vacuum Button
Locking Mechanism
Moist Vacuum Button Moist Indicator Starter Kit:
Soft Vacuum Button
Soft IndicatorVacuum sealer bag 8" x 12" inches
(20.32 x 30.48 cm), x3
Stop Button
Stop IndicatorVacuum sealer bag 11" x 15.8"
inches (27.94 x 40.132 cm), x2
Release Buttons (2x)Vacuum sealer roll 11" inches x 10'
feet (27.94 cm x 3.048 m), x1
Cutting HeadReplacement gasket, x1
Cutting Bar
Sealing Wire
Vacuum Chamber
AB
10
1
9
1
8
B
C
D
E
3
2
8
4
5
6
7
1
8
10
9
11
12
12
13
13
14
15
16
2
A
A
B
C
D
E
• Never fill the vacuum sealer with liquid.
• Keep the vacuum sealer away from pets.
• Also inform other users about the hazards!
NOTE! RISK OF DAMAGE! FIRE HAZARD!
»Improper handling of the vacuum sealer can lead to damage to the device.
• Place the vacuum sealer on a well-accessible, level, dry, heat-resistant, and sufficiently stable work surface. Do not place the vacuum sealer on
the edge or at the edge of the work surface.
• Never place the vacuum sealer near flammable materials.
• Avoid heat buildup by not placing the vacuum sealer directly against a wall or under hanging cabinets, etc.
• Protect the vacuum sealer from direct sunlight.
• Never place the vacuum sealer on or near hot surfaces (e.g., stove tops, heaters, etc.).
• Do not allow the power cord to come into contact with hot parts.
• Never expose the vacuum sealer to high temperatures (heaters, etc.).
• Do not continue to use the vacuum sealer if the plastic components of the device have cracks, breaks, or have deformed. Replace damaged
parts only with suitable original replacement parts.
• Use the vacuum sealer only at room temperature (approximately 50–77°F or 10 – 25°C).
• Never immerse the vacuum sealer in water for cleaning, and do not use a steam cleaner for cleaning. This could damage the vacuum sealer.
NOTE! RISK OF DAMAGE!
»Improper handling of the vacuum sealer can lead to damage to the device.
• Only vacuum seal food or objects that will not be damaged by the vacuum pressure created.
• Ensure that the items to be sealed do not have sharp corners or edges, as these can damage the film.
WARNING! HEALTH HAZARD!
»Improper handling of vacuum seal bags or rolls can lead to health issues.
• Never reuse bags, especially if they have contained raw meat, fish, or oily foods.
• Do not reuse bags that have been boiled or heated in a microwave.
2.4 f S ioodAfetynStructionS
• To ensure the safety and quality of food, follow the procedures outlined below.
WARNING! HEALTH HAZARD!
»Improper handling and storage of food can lead to health issues.
• Please ensure that you wash your hands before vacuum sealing and clean all necessary utensils and surfaces.
• Immediately refrigerate or freeze perishable foods after vacuum sealing. Do not store them at room temperature.
• Certain vegetables, such as broccoli, cauliflower, or cabbage, can only be vacuum sealed airtight if they are blanched first, as they otherwise
emit gases.
• To extend the shelf life of fruits and vegetables, such as pears, apples, potatoes, or root vegetables, they should be peeled before vacuum
sealing.
• The shelf life of dry foods, such as nuts or grains, can be extended by storing them in a dark place.
WARNING! RISK OF DAMAGE, FIRE HAZARD AND ELECTRIC SHOCK!
»Improper handling and storage of food can lead to health issues.
• Household use only.
• Close supervision is required when this product is used near children.
C
12
14
E
5 oPEration
WARNING! RISK OF INJURY!
»Improper handling of the prod can lead to injuries.
−If an object (such as a sleeve, tie, etc.) unintentionally enters the product, immediately unplug the power cord.
NOTE!
»Sealing bags with the product may produce a slight odor. Ensure the room is well-ventilated, e.g., by opening windows.
5.1 u r fSingAollofilm
WARNING! RISK OF INJURY!
»Do not touch the sealing wire after sealing. The sealing wire can still be very hot even with the housing cover open.
The supplied vacuum seal bags and roll are suitable for storing food and for sous-vide cooking. Additionally, you can use the vacuum seal bags and
roll for thawing and heating in the microwave (up to 158 °F or 70 °C).
1. Ensure that the cutting head is in its starting position at the right or left stop.
2. Flip up the cutting bar (see Fig. A).
3. Feed the roll of film from the back under the cutting bar.
4. Now pull the roll of film to the desired length.
1 G iEnEralnFormation
This manual is an integral part of the product and contains important information for safe setup and operation. Throughout this
document, the Vacuum Sealer will be referred to simply as the product.
Carefully read these instructions, particularly the safety guidelines, prior to operating the product. Non-compliance with these
instructions may result in serious injury or damage to the product.
This instruction manual is in accordance with the standards and regulations applicable in the United States. Pay attention to country-specific
guidelines and legislation. Retain this manual for future reference. If you pass the product to another user, include this manual.
The instruction manual can also be accessed and downloaded online via the following link:
https://downloads.maginon.de/en/downloads/operation-manual/
2 saFEty
2.1 explAnAtion S WofignAlordS
The following symbols and signal words are used in this user manual.
WARNING!
»This signal symbol/word indicates a hazard with a medium risk level that, if not avoided, could result in death or serious injury.
NOTE
»This signal word warns of potential property damage.
2.2 explAnAtion SofymBolS
The following symbols and signal words are used in this user manual, on the product, or on its packaging.
2.3 g S ienerAlAfetynStructionS
WARNING! RISK OF INJURY!
»Faulty electrical installation, excessive mains voltage, or incorrect operation can cause electric shock.
• Only use the vacuum sealer indoors and connect it to a properly installed 110 – 120 V~ outlet.
• Connect the vacuum sealer to an easily accessible outlet so that it can be quickly disconnected from the power supply in the event of a
malfunction.
• Do not operate the vacuum sealer if it has visible damage or if the power cord or plug is defective.
• If the power cord of the vacuum sealer is damaged, it must be replaced by the manufacturer, their customer service, or a technically qualified
person to avoid hazards.
• Do not open the casing; leave repairs to professionals. For this, contact the service address provided on the warranty card. Liability and
warranty claims are void if repairs are carried out by the user, or in cases of improper installation or operation.
Read the manual.Warning of hot surface.
Products bearing this symbol are operated with
alternating current.
Press simultaneously on these areas to close the
housing cover of the product.
Use the product indoors only.
D
131211
98710
NOTE!
»Ensure the bag is not overfilled. It is recommended that the length of the vacuum seal bag be at least 10 cm (about 4 inches) longer than
the food item being vacuum sealed.
2. Open the housing cover of the product.
3. Place the open side of the vacuum seal bag over the rubber strip , ensuring that the bag opening is completely within the vacuum
chamber and framed by the seal (see Fig. C).
NOTE!
»Ensure that the vacuum seal bag does not cover the suction nozzle .
»Ensure that no food items are in the area of the vacuum chamber or near the sealing wire .
4. To prevent wrinkles during the vacuum and sealing process, smooth out the vacuum seal bag in the area of the vacuum chamber and the sealing wire.
5. Then firmly press down on both sides of the housing cover simultaneously until it audibly and tangibly clicks into place (see Fig. D).
6. Press the Normal vacuum button and the Normal and Stop indicator lights will illuminate. You can interrupt the process at any
time using the Stop button .
7. The product starts the vacuuming process and the Seal indicator light will illuminate. At the end of the process, the Seal indicator light
will blink. After the vacuuming process is complete, the product will seal the vacuum seal bag.
8. Once all indicator lights are off, the vacuuming and sealing process is complete.
9. Press both release buttons on the sides of the product simultaneously to open it.
10. Open the housing cover and remove the vacuum-sealed bag.
NOTE!
»For proper handling of the vacuum-sealed food, refer to the Food Safety Instructions section.
11. Allow the product to cool down for 60 seconds after each sealing process.
12. To turn off the product, unplug the power cord.
5.4 m v S SoiStAcuumeAlingAndeAling
NOTE! RISK OF DAMAGE!
»Improper handling can lead to damage to the product.
−Always use clean and unused vacuum seal bags.
−Do not vacuum liquids; this can cause damage to the product.
Use the Moist vacuum button to vacuum seal foods such as fresh fish, poultry, and meat
1. To perform moist vacuum sealing, proceed as previously described in the Vacuum Sealing and Sealing chapter.
2. Instead of the Normal vacuum button , use the Moist vacuum button .
5.5 S v S SoftAcuumeAlingAndeAling
NOTE! RISK OF DAMAGE!
»Improper handling can lead to damage to the product.
−Always use clean and unused vacuum seal bags.
−Do not vacuum liquids; this can cause damage to the product.
To vacuum seal delicate and soft foods such as berries, cooked vegetables, soft bread like toast, and bread slices, use the Soft vacuum button
(also suitable for sous-vide cooking).
1. To perform soft vacuum sealing, proceed as previously described in the Vacuum Sealing and Sealing chapter.
2. Instead of the Normal vacuum button , use the Soft vacuum button .
10 D isPosalinstructions
10.1 d iSpoSeofpAckAging
Dispose of the packaging according to type. Put cardboard and carton in the waste paper bin and foil in the recycling bin.
10.2 d piSpoSeoftheroduct
Old appliances may not be disposed of in the household trash!
− Should the product no longer be capable of being used at some point in time, dispose of it in accordance with the regulations in force in
your city or state.
− Please ensure your recycling information conforms with the local regulations and EPA recommendations (www.epa.gov).
10.3 fcc c SompliAncetAtement
Identification of the product: Vacuum Sealer VS-100.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC responsible party: Aldi Inc., Batavia, IL 60510, USA / www.aldi.us
NOTE! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such
modifications could void the user authority to operate the equipment.
NOTE! This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
− Reorient or relocate the receiving antenna.
− Increase the separation between the equipment and receiver.
− Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
− Consult the dealer or an experienced radio/TV technician for help.
NOTE!
»For vacuum sealing, the bag should only have a self-sealed seam at the bottom. Vacuum sealing over self-sealed side seams is not
possible. Cut small bags by trimming the length of the film roll, not by cutting along the direction of the film roll (see Fig. E).
»It is recommended that the length of the vacuum seal bag be at least 10 cm (about 4 inches) longer than the food item being vacuum sealed.
»The vacuum seal bag should not exceed a length of 50 cm (about 20 inches), as this can negatively affect the vacuum sealing
performance.
5. Fold down the cutting bar afterward.
6. Press down lightly on the cutting bar and use the cutting head to cut the film (see Fig. B).
7. If you need multiple bags, repeat steps 1 to 6 before proceeding to sealing.
8. Open the housing cover and place the end of the bag so that it extends into the vacuum chamber (Fig C). The film should extend
about 0.79 inches beyond the rubber strip into the vacuum chamber.
9. To prevent wrinkles during the sealing process, smooth out the vacuum seal bag along the rubber strip .
10. Then firmly press down on both sides of the housing cover at the same time until it audibly and tangibly clicks into place. Use both hands for this.
11. To seal the vacuum seal bag, press the Seal button , and the Seal and Stop indicator lights will illuminate. You can stop the
process at any time with the Stop button . At the end of the process, the Stop indicator light will go out, and the Seal indicator light
will blink. At the end of the process, the suction nozzle is activated to ensure a seamless seal.
12. Once the indicator light goes out, the vacuum seal bag is fully sealed.
13. Press both release buttons on the sides of the product simultaneously to open it.
14. You can now remove the vacuum seal bag.
15. Be careful not to touch the sealing wire. There is a risk of burns. Allow the product to cool down for 60 seconds after each sealing process.
5.2 S veAlingWithoutAcuuming
WARNING! RISK OF INJURY!
»Do not touch the sealing wire after sealing. The sealing wire can still be very hot even with the housing cover open.
You can use the sealing function of the product to simply close a vacuum seal bag.
1. Open the housing cover and place the end of the bag so that it extends into the vacuum chamber (see Fig. C). The film should extend
about 0.79 inches beyond the rubber strip into the vacuum chamber .
2. To prevent the formation of wrinkles during the sealing process, smooth out the vacuum seal bag in the area of the sealing wire.
3. Then firmly press down on both sides of the housing cover simultaneously until it audibly and tangibly clicks into place. Use both hands for this.
4. To seal the vacuum seal bag, press the Seal button , and the Seal and Stop indicator lights will illuminate. You can interrupt the
process at any time using the Stop button . At the end of the process, the suction nozzle is activated to ensure a seamless seal.
5. Once the indicator light goes out, the vacuum seal bag is fully sealed.
6. Press both release buttons on the sides of the product simultaneously to open it.
7. You can now remove the vacuum seal bag.
8. Be careful not to touch the sealing wire. There is a risk of burns. Allow the product to cool down for 60 seconds after each sealing process.
5.3 n v SormAlAcuumeAling
NOTE! RISK OF DAMAGE!
»Improper handling can lead to damage to the product.
−Always use clean and unused vacuum seal bags.
−Do not vacuum liquids, as this can damage the product.
Use the Normal vacuum button to vacuum seal items such as solid raw vegetables, hard cheese, crusty bread, air-dried sausages, and similar items.
1. Fill the vacuum seal bag with the food items to be vacuum sealed.
NOTE! RISK OF DAMAGE!
»Improper handling can lead to damage to the product.
−Do not use aggressive cleaning agents, brushes with metal or nylon bristles, or sharp or metallic cleaning tools such as knives,
metal sponges, and the like. These can damage the surfaces.
−Never place the product in the dishwasher. Doing so would destroy it.
−The seals and rubber strip must not be removed for cleaning. Ensure that the seals and the rubber strip are completely
dry before the next operation.
1. Unplug the power cord before cleaning.
2. Allow the product to cool down completely.
3. Wipe the product with a slightly damp cloth. Afterward, let all parts dry completely.
7.2 r S r SeplAcingeAlSAnduBBertrip
WARNING! RISK OF BURNS!
»The sealing wire of the product gets hot during operation. You can burn yourself
−Allow the product to cool down completely before changing the seals and rubber strip.
The seals and rubber strip can wear out over time. Replace them as needed as follows:
1. Flip the housing lid upwards.
2. Remove the defective seal .
3. Gently stretch the replacement seal and press it into the designated recess.
4. Remove the rubber strip (not included, please order from customer service if defective) .
5. Carefully press the replacement rubber strip into the designated recess.
8 storaGE
−Never store the product near a heat source.
−Do not bend or squeeze the power cord. Coil the power cord into the designated cable compartment beneath the product.
−To prevent the seals of the product from deforming, only lightly close the housing lid for storage and do not lock it.
−All parts must be completely dry before storage.
−Store the product only when it is dry.
−Always keep the product in a clean and dry place, protected from direct sunlight and out of reach of children.
−For storage, use the original packaging.
9 t sEchnicalPEciFications
Model:Weight:VS-100approx. 1.63 lbs (approx. 0.738 kg)
Mains Voltage:110 – 120 V~, 60 HzDimensions (W × D × H):
approx. 14.88 inches × 3.66
inches × 2.80 inches (approx. 378
mm × 93 mm × 71 mm)
Power Consumption:Vacuum Pump:130 W0.5 bar (approx. 7.25 psi)
Rest Period:
1 min after 5 completed vacuuming
operations
Suction Capacity:
4.5 liters per minute (approx. 1.19
gallons per minute)
Protection Class:II (Double-insulated)
Specifications are subject to change without notice.
5.6 o c pBServeoolingeriodS
NOTE!
»To avoid overheating the product, allow a cooling period of 60 seconds after every 5th vacuum sealing operation and each subsequent
operation:
v AcuumSeAlingproceSS
normAl
Vacuum Duration (Seconds)
Soft
Vacuum Duration (Seconds)
moiSt
Vacuum Duration (Seconds)
1. Cycle202034
2. Cycle181832
3. Cycle162640
4. Cycle153549
5. Cycle153549
! Interruption – with a 60-second pause after the 5th cycle and each subsequent cycle to cool down the heating wire!
5.7 i S / v SnterruptingeAlingAcuumeAling
NOTE! RISK OF DAMAGE!
»Improper handling can lead to damage to the product.
1. If the sealing or vacuum sealing process does not proceed correctly (see “Troubleshooting Guide”), it can be prematurely stopped by pressing
the “Stop” button .
2. After correcting the issue, you can resume the sealing or vacuum sealing process.
11 warranty
Please contact our by phone or e-mail before sending in the item.AFTER SALES SUPPORT
This allows us to provide support in the event of possible user errors.
Only submit Warranty Card in the event a warranty claim is needed due to a faulty item.
11.1 Aldi i. ncfullWArrAntyconditionS
Dear Customer,
The is a full warranty offering you the following benefits:ALDI warranty
Warranty period:3 year from date of purchase.
6 months for movable parts and consumables under normal and proper
conditions of use (e.g. rechargeable batteries).
Costs:Free repair/exchange or refund.
No shipping or handling costs
Hotline:1855 7548 297
Operating hours:Monday to Friday, 8 am–6:30 pm (EST)
Please contact our service hotline by phone or e-mail before sending in the product. This allows us to provide support in the event of possible
operator errors.
In order to make a claim under the warranty, please send us:
• The faulty item with all component parts and the original receipt.
The warranty does not cover damage caused by:
• orAccident unanticipated events (e.g. lightning, water, fire).
• orImproper use transport.
• andDisregard of the safety maintenance instructions.
• Otherorof the product. improper treatment modification
After the expiration of the warranty period, you may choose to have your product repaired at your own expense. You will be notified of the repair
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state but this warranty is not intended to
exceed statutory minimum requirements beyond what is included above.
This warranty does not limit the statutory obligation of the seller arising from any implied warranties. The period of warranty can only be extended
in accordance with applicable law.
Neither the service company nor ALDI will assume any liability for data or settings stored on any returned product.
6 t GrouBlEshootinGuiDE
ecSrrorAuSeolution
All status lights are flashing
simultaneously.
No complete vacuum is formed in the bag.Wait approximately 2 minutes and start the process again.
The product is not operating.
The foil bag is not sealed correctly.Plug in the power cord.
The product has been operating too long.Unplug the product and let it cool down.
The product does not vacuum.
The foil bag was not inserted correctly.Place the opening of the foil bag completely into the
vacuum chamber.
The foil bag covers the suction nozzle.Position the opening of the foil bag in the vacuum
chamber so that the suction nozzle is not covered.
The housing lid is not fully locked.Press the lid firmly down on both sides simultaneously
until it clicks into place audibly and can be felt.
No complete vacuum is formed
in the bag.
The foil bag was not inserted correctly.Place the opening of the foil bag completely into the
vacuum chamber.
The foil bag is defective.Use a different foil bag.
The product‘s seals are dirty.Clean the seals and reinsert them correctly after cleaning.
No complete vacuum is formed
in the bag.
There are wrinkles, crumbs, grease,
or similar in the bag at the area of the
sealing wire.
Reopen the foil bag and clean the area.
The sealing wire is overheated.Open the housing lid of the product and allow it to cool
down completely.
The vacuum-sealed foil bag does
not maintain the vacuum.
The foil bag is defective.
Use a different foil bag.
7 c m lEaninGanDaintEnancE
7.1 cleAning
WARNING! RISK OF BURNS!
»The sealing wire of the product gets hot during operation. You can burn yourself.
−Allow the product to cool down completely before cleaning.
NOTE! RISK OF SHORT CIRCUIT!
»Water or other liquids entering the casing can cause a short circuit.

Beoordeel deze handleiding


Product specificaties

Merk: Ambiano
Categorie: Vacuumverpakker
Model: VS-100

Heb je hulp nodig?

Als je hulp nodig hebt met Ambiano VS-100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden