Aluratek ASHDPF121F Handleiding

Bekijk gratis de handleiding van Aluratek ASHDPF121F (1 pagina’s), behorend tot de categorie Digitaal fotolijstje. Deze gids werd als nuttig beoordeeld door 18 mensen en kreeg gemiddeld 4.5 sterren uit 3 reviews. Heb je een vraag over Aluratek ASHDPF121F of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Step 2: Select “Add Sharing” (Image 8), and input the email address or phone number of the

person you want to share the frame to and select “Done” (Image 9).

For the person that you just shared the frame to, p1-he or she will get a notification on their smart

device. The frame will show up as a shared device on the main screen. They can start sending

pictures to the frame by following the instructions in “How to send photos to the frame from your

phone” section.

1

For ongoing product improvement, this manual is subject to modification without prior notice.

aluratek.com

What's-In-The Box?

Let's Power Up!

Connect the power adapter to an outlet

to turn the frame on.

2

Download and install "Frametime" App on your phone

How to Add Your Smart Frame to the Frametime App

Your network

How to send photos to the frame from your phone

543

7 86

User Manual

Image 1

Image 8Image 9

Download Frametime app by searching for

"Frametime" from app store.

Once the "Frametime" app is installed, please

follow the on screen instruction to register an

account.

Step 1: Connect the Frame to Your WiFi Network

O t Ft y st t t of t f. Pss t “ ” tt at penherame ime apponourmar phoneandap onhe nameheramerehebuon

t tt of t s sct t y sh to to t f. W fs st tos, he boomhecreen andelephoosou wisendherameheninihedelecingpho

prehe “done” buonheboom righendphoosherameprehe “upload” buonss t tt at t tt t. To s t to t f, ss t tt.

Open the "Frametime" app, choose your "WiFi frame", press the " " button at the bottom

right corner. Tap "Add" in the middle, choose a time that you want to auto power on/off your

frame, then save it.

How to remove a frame from Frametime app

Step 1: Open the Frametime app, select your "WiFi frame", tap the " " on the upper right

corner to edit frame setting, and tap "Remove Device" to delete the frame from your account.

Image 6Image 7

Please make sure the person you are sharing the frame to already downloaded the “Frametime” app

on their smart device and created an account. You will need to have the email address they used for

their account in order to share the access of the frame to their account.

Step 1: Open the “Frametime” app, choose the digital photo frame and select the “ ” icon in the

top right corner. (Image 6) Then select “Share Device” (Image 7).

Allow other users to send pictures to your frame

1. Press the “Pthoo”icon onhe t screen. (I 1)mage

2. Press the “Next” button. (Image 2)

3. Press the “Next” button. (Image 3)

Step 2: Open the Frametmei Ar pp on You

S martDevice

T ap“Create Home”and en ter a homenameou. Y

can selecort deseleroomct s b y tappingonhe t

ckhecmarkre. Pss “Sav e”inhe t top righorner t c.

Step 3: Open the Frametime app if not already open, and press “Add Device” (Image 3). Press

“Scan” and tap “ok” to allow camera access (Image 4). Scan the QR code on the frame. A new

window will appear that will allow you to give your frame a name and select a room. Press “Done”

in the top right corner (Image 5).

Copyright © 2022 Aluratek, Inc. All Rights Reserved.

E-mail: suppor[email protected]om

Web: www.aluratek.com/helpdesk

Local (Irvine, CA): 714-586-8730

Toll free: 1-866-580-1978

● Frame Stand

● Power Adapter

● USB 2.0 Cable

WiFi Touchscreen Digital Photo Frame

Image 3Image 4Image 5

10 119

Technical Support

If you need further assistance, please contact the Aluratek support department

for troubleshooting prior to returning this device.

WARNING!!! This equipment has been tested and found to comply with the limits

of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by whatever measures may be required to correct the interference.

Radio and TV Interference Statement

Aluratek warrants this product against defect in material or workmanship for 1

YEAR from the date of purchase.

This warranty becomes invalid if the factory-supplied serial number or "warranty

void" sticker has been removed or altered on the product.

This warranty does not cover:

A) Cosmetic damage or damage due to acts of God

B) Accident, misuse, abuse, negligence or modification of any part of the product.

C) Damage due to improper operation or maintenance, connection to improper

equipment, or attempted repair by anyone other than Aluratek.

D) Products sold AS IS or WITH FAULTS.

IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR

THE PRODUCTROM DIRECT F, INDIRECT, SPE, ICIALNCIDENTALR , O

CONUENL DAMRULSEQTIAAGES ESTIE NROM THG FU THESE OF

PROTDUC, IT'S AOMPANNWARRDOENN.CCYIG SOFTE, O IT'S CUMTATIO

Aluratek makes no warranty or representation, expressed, implied, or statutory,

wirespecproducon enorusehidoumenion and alth t to it's cts, tts of ts ctat l

accompanying software, and specifically disclaims it's quality, performance,

merchantability, or fitness for any particular purpose. Atesve o lurak reers theright t

revise or upda te is ot'product, sftware or doumen ctatn without obligation to notify io

any individual or entity.

Warranty

S yunda

Monday

T yuesda

W yednesda

T yhursda

F yrida

Sat yurda

Image 2

Image 3Image 4

Image 5

Note: You can use the frame to display pictures on USB/SD Card without connecting to WiFi by

selecting USB/SD on the main menu

4. Select “Connect Wi-Fi” (Image 4)

5. T aponour y neworkt name (I mage5)windo. A w

twill appearo en ert the pas swordapon. T the

fpasswordield to vreeal keyboard .

home_office

downstair _202s2

Atelurak newor-00tk1

Product specificaties