Aluratek ABPM02F Handleiding

Aluratek Niet gecategoriseerd ABPM02F

Lees hieronder de 📖 handleiding in het Nederlandse voor Aluratek ABPM02F (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Measurement Principle

aluratek.com

model ABPM02F

User Manual

Home Health Digital Pulse Oximeter

Safety InformationProduct Description

Pulse Oximeter is an important and common device to check oxygen

saturation (SpO2) and pulse rate. It’s a small, compact, simple, reliable and

durable physiological monitoring device. It contains the mainboard, OLED

display and dry batteries.

Arterial oxygen saturation is measured via a method which is called

oximetry. It is a continuous, non-invasive method based on the different

spectra absorption of hemoglobin and oxyhemoglobin (called spectropho-

tometer principle).

An experience formula of data process is established bytaking use of

Lambert Beer Law, and according to Spectrum Absorption Characteristics

of hemoglobin (Hb) and Oxyhemoglobin (HbO2) in glow and near-infrared

zones. The operation principle of the instrument is Photoelectric

Oxyhemoglobin Inspection Technology. Two beams of different wavelength

of lights (666nm visible red light and 905nm near infrared light) can be

focused on human nail tip via emitters by adopting the Capacity Pulse

Scanning and Recording Technology.Then measured signal will be

obtained via a photosensitive element. The amount of light absorbed is

related to the amount of oxygen in the blood during these pulses. The ratio

of the two absorbed spectrums can be calculated via the microprocessor

and the results are compared with the saturation valuein the memory, so

the blood oxygen saturation value is obtained.

• Anyone who uses the pulse oximeter must receive adequate training

before use.

• The pulse oximeter is only meant to assess patients’ physiological

conditions. It must be used in conjunction with clinical symptoms. It is not

intended for treatment.

• When using the pulse oximeterin conjunction with the electrical surgery

equipment, the user should ensure safety of the patient.

• Do not use the pulse oximeter in the presence of EXPLOSION HAZARD:

flammable anesthetics, explosive substances, vapors or liquids.

• It is forbidden to use the pulse oximeter in MRI (magnetic resonance

imaging) scanning or CT (Computed Tomography) because the induced

current could cause potential burning.

• The pulse oximeter does not include an alarm function. Therefore,

continuous monitoring for long periods of time is not suitable.

• Modification of the pulse oximeter is not allowed. Any product

maintenance should be done by manufacturer-approved, professional

maintenance personnel.

• Please shut off the power before cleaning the pulse oximeter.

Disinfecting the pulse oximeter via high-pressure and high-temperature

methods is prohibited. Any cleaning agents/disinfectants other than

recommended ones listed in the operation manual are not allowed for use.

• The pulse oximeter is not waterproof. Keep its surface dry and clean and

prevent any liquid from infiltrating the product.

• The pulse oximeter is fragile and requires precision to function properly.

Avoid any pressure, jostling, strong vibrations, or other potential

mechanical damage. Hold it carefully and lightly. If it is not in use, the

pulse oximeter should be appropriately stored.

• Do not dispose the pulse oximeter randomly. Disposal procedure should

follow local regulations or hospital policy regarding disposal of the pulse

oximeter and accessories.

• Use AAA alkaline batteries. Do not use carbon or poor quality batteries.

Remove the batteries if the pulse oximeter hasn’t been used for a long time.

• A functional tester can’t be used to assess the accuracy.

• If the patient is the intended operator, the patient must read the operation

manual carefully or consult with a doctor and/or manufacturer before

usage. If there’s any discomfort while using the pulse oximeter, stop

usage immediately and go to the hospital.

Product Features

Display Introduction Battery Installation

1. Simple and convenient operation with one button.

2. Compact, lightweight, and convenient to carry.

3. Long battery life of 15 hours continuous use.

4. Battery indicator on screen.

5. Will automatically turn off after 10 seconds when there’s no signal.

6. Record data between smartphone and Oximeter via Bluetooth.

1. Hold the product in one hand with the display panel facing the palm.

Press down and slide in the direction of the arrow. The battery

compartment is opened. (Figure 2).

2. Install batteries into the slots according to the "+" and "-" symbols as

shown. (Figure 3). Replace the lid onto the battery compartment and

push upwards to close it.

1. Once the data has been displayed on the screen, press Rotate Display:

the “POWER/FUNCTION” button once to rotate the display orientation

(Figure 7).

2. After the product is powered on, long press the Bluetooth Pairing:

“POWER/FUNCTION” button to turn on Bluetooth. The Bluetooth

indicator light on the top of display will flash (Figure 8).

3. The Oximeter will automatically turn off when a finger isn’t in the device

for more than 10 seconds (Figure 9).

4. In the event of a poor or failed finger scan,

will be displayed on the screen (Figure 10).

5. Heartbeat Tone: With data displayed on the screen, pressing the

“POWER/FUNCTION” button twice will prompt the heartbeat tone to be

switched on/off.

Directions for Use

1. After properly installing two AAA batteries, “Press to Open Device”

as shown in (Figure 5), and open the clip. Insert the testee’s finger. Put

finger into the rubber cushions of the clip. Make sure the finger is in the

right position as shown in (Figure 5), then release the clip.

2. Wait for a few moments, the SpO

2 value and PR value will be displayed

on the LED screen after plethysmogram wave and measured values

are stable, as shown in (Figure 6).

Cleaning and Disinfection

Bluetooth Communication Function

The ABPM02F Pulse Oximeter is Bluetooth enabled and can send data to

the OxyCare app on your smartphone.

Lanyard Installation

1. Thread the thinner end of the lanyard through the lanyard hole. The

position of the lanyard hole is shown in (Figure 4).

(Notice: the lanyard hole is on both sides.)

2. Thread the thicker end of the lanyard through the thinner end of the

lanyard. Then, pull the thicker end of the lanyard until it’s tight.

• The positive and negative ends of batteries must be installed

correctly, otherwise the device may be damaged.

• When installing or removing batteries, please follow the correct

operation procedure, otherwise the battery compartment may be damaged.

• To avoid any static electricity damage to the pulse oximeter, direct or

indirect static electricity should be discharged before usage.

• Try to keep the pulse oximeter away from any radio receivers when it’s in use.

• If the pulse oximeter uses with configuration which does not pass EMC

test, it can enhance electromagnetic radiation or reduce anti-electromag

netic interference performance. Please use the specified configuration.

• The pulse oximeter should not be in close proximity (or stacked) with

other devices. If that’s not possible, it should be observed and verified

that the oximeter can run normally with the close proximity/stacked

configuration.

• There should be no dirt or wound on the tested surface (i.e finger).

• Federal law restricts this device to sale by the order of a physician.

Intended Use

The pulse oximeter is a reusable device，and it’s intended for intermittent

checks of oxygen saturation and pulse rate for adults in a clinical

environment. This medical device is not intended for continuous monitoring.

Applicable People and Scope

The pulse oximeter is intended for monitoring adults. It is used in clinic

settings, outpatient department and sickrooms. It can also be used in the

recovery and health care organizations, and the community medical

treatments.

Contraindications

The pulse oximeter only applies to adults. It is not suitable for

injured skin tissue.

If you need further assistance, please contact the Aluratek support

department for troubleshooting prior to returning this device.

E-mail: support@aluratek.com

Web: www.aluratek.com/helpdesk

Local (Irvine, CA): 714-586-8730

Toll free: 1-866-580-1978

Aluratek warrants this product against defect in material or

workmanship for from the date of purchase.1 YEAR

For more information, please visit:

https://aluratek.com/warranty-return-policy

You can register your product online at:

https://aluratek.com/product-registration

Technical Support and Warranty

Radio and TV Interference Statement

WARNING!!! This equipment has been tested and found to comply with

the limits of a Class B digital device, pursuant to part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by whatever

measures may be required to correct the interference.

Diagram of Measurement Principle

Figure 1

Figure 2

Figure 5

Figure 7 Figure 8

Figure 9 Figure 10

Figure 6

Figure 3

Figure 4

Bluetooth Indicator

Press to Open Device

SpO2 Value

Plethysmogram Wave

PR Value

Pulse Rate Indicator

Power & Function button

Battery Status

Buzzer Indicator

Perfusion Index Value

Lanyard Hole

• Be sure to place the testee’s finger inside the product in the correct

orientation. The LED part of the sensor should be at the backside of

the testee’s hand. Be sure to insert the finger deep enough into the

sensor so that the fingernail is opposite to the light emitted from the

sensor.

• Don’t move the finger and remain motionless during the process.

• Data will appear in less than 30 seconds.

NOTE

Factors Affecting Measurement Accuracy

• Check the pulse oximeter for damage before use. If it’s damaged,

don’t use it.

• Don’t put the pulse oximeter on extremities with arterial catheter or

venous syringe.

• Don’t perform SpO and NIBP measurements on the same arm 2

simultaneously. Obstruction of blood flow during NIBP measurements

may adversely affect the reading of the SpO value.2

NOTE

The usage of Bluetooth communication software (which is installed in the

smartphone) is written in the “Bluetooth APP operation guide”.

• Don’t use the pulse oximeter to measure patients whose pulse rates

are lower than 30bpm (this may cause incorrect results).

• The well perfusion of measuring instrument should fully cover the test

window of the sensor. Clean and dry the measurement part before

storing the pulse oximeter.

• Cover the sensor with opaque material under strong light. Otherwise,

the light can cause inaccurate measurements.

• Make sure that there is no contamination or scarring on the tested

finger. Otherwise, the results may be incorrect.

• The product is prone to cross-contamination when used on different

patients. Disinfection is recommended before using the product on

other patients.

• Incorrect placement of the sensor may affect the accuracy of the

measurements. The same horizontal position with heart should be

chosen to achieve the best measurements.

• The highest temperature of usage should not exceed 41 C.˚

• Change sensor location and check skin integrity and circulatory status

at least every 2 hours.

• The measurements depend on absorption of special wavelength ray

by oxidized hemoglobin and deoxyhemoglobin. The concentration of

non-functional hemoglobin may affect the accuracy of the

measurement.

• Shock, anemia, hypothermia, and vasoconstrictive drugs may

decrease arterial blood flow to an unmeasurable level.

• Pigments or deep colors (i.e nail polish, artificial nails, dyes, or

pigmented cream) may cause inaccurate measurements.

• Do not immerse the oximeter or any relevant accessories in water or

disinfectant.

• We recommend that the product be disinfected only when necessary to

avoid long-term damage to the product.

• Do not use cleaning agents/disinfectants other than the recommended

methods below.

• Do not disinfect the device via high-pressure and high-temperature.

• Turn off the power and take out the batteries before cleaning and

disinfecting.

Technical Specifications

Troubleshooting

1. OLEDDisplay Mode:

2. SpO2:

Measurement range: 0~100%

Accuracy: ± 3%（）70%~100%

3. Pulse Rate:

Measurement range: 25~250bpm

Accuracy: ± 2bpm

 •Pulse Rate accuracy has passed the verification and comparison with

SpO2 simulator.

4. Low Perfusion:

Range: 0.5%~20%

SpO2 accuracy: ± 3% (70%~100%)

PR accuracy: 25~250bpm ± 2bpm

5. Electrical specifications:

Working voltage: D.C.2.2 V~D.C.3.4V

Battery Type: Two 1.5V AAA alkaline batteries

Power consumption: less than 50mA

6. Product specifications:

Size: 58 (H) × 34 (W) × 30 (D)mm

Weight: 50g (including two AAA batteries)

7. Environment requirements:

Temperature:

Operation: +5~+40℃

Transport and storage: -10 ~ +50℃

Humidity:

Operation: 15%~80%（）noncondensing

Transport and storage: 10%~90%（noncondensing）

Atmospheric Pressure:

Operation: 860hPa~1060hPa

Transport and storage: 700hPa~1060hPa

NOTE:

•A functional tester can’t be used to assess this product’s accuracy.

•The purpose of confirming the blood oxygen measurement’s accuracy is

to compare the oximeter measurement value with the value of blood

gas analyzer.

8. LED:

Wavelength: 666nm/905nm

Output power: <0.1mW

9. Bluetooth:

Frequency range: 2402.0~2480.0MHz

Transmission distance: 10m

Transmission rate: 4k Bytes/s

Modulation system: GFSK

Bluetooth protocol version: Bluetooth specification V4.1

Setup Information

1. Clean the product with a cotton or soft cloth moistened with water.

2. After cleaning, wipe off the water with a soft cloth.

3. Let the device air dry only.

1. Clean the product as instructed above.

2. Disinfect the product with cotton or soft cloth moistened with one of the

recommended disinfectants.

3. After disinfection, be sure to wipe off the disinfectant left on the product

with a soft cloth moistened with water.

4. Let the device air dry only.

Cleaning

The recommended disinfectants include: ethanol 70%, isopropanol 70%, or

glutaraldehyde (2%)

Disinfection

Trouble Possible Reason Solution

The SpO and PR 2

can’t be displayed

normally and the

value disappeared.

1. The finger is not

properly positioned.

2. Bluetooth signal is

interrupted.

1. Please try again.

2. Check the Bluetooth

connection and

reconnect.

The SpO2 and PR

display unstable.

1. The finger is not

properly positioned.

2. The finger is shaking

or the testee is moving.

1. Try repositioning the

finger and try again.

2. Wait a few minutes and

try again.

Trouble Possible Reason Solution

The device is not

powering on.

1. The batteries are

drained or almost

drained.

2. The installation of

batteries are not

correct.

3. The device may be

defective.

1. Change batteries.

2. Reinstall batteries.

3. Please contact the

store/website where

the device was

purchased.

The display

suddenly turns off.

1. The product is

automatically powered

off when no signal is

detected longer than

10 seconds.

2. Batteries may be

completely drained.

1. Normal.

2. Replace the batteries.

Product specificaties

Merk:	Aluratek
Categorie:	Niet gecategoriseerd
Model:	ABPM02F

Heb je hulp nodig?

Als je hulp nodig hebt met Aluratek ABPM02F stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Aluratek

Aluratek AUH100F Handleiding

8 April 2024

Aluratek AWCPA01FB Handleiding

19 Maart 2024

Aluratek AULS03F Handleiding

19 Maart 2024

Aluratek AUH200F Handleiding

28 Augustus 2023

Aluratek AWAGA01F Handleiding

28 Augustus 2023

Aluratek AUPS01F Handleiding

28 Augustus 2023

Aluratek AUM01F Handleiding

27 Augustus 2023

Aluratek APAP01F Handleiding

25 Augustus 2023

Aluratek AWLMC01F Handleiding

6 Juli 2023

Aluratek ABPM02F Handleiding

1 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024