Alto TrueSonic TS SUB 18 Handleiding
Bekijk gratis de handleiding van Alto TrueSonic TS SUB 18 (8 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 25 mensen en kreeg gemiddeld 4.7 sterren uit 13 reviews. Heb je een vraag over Alto TrueSonic TS SUB 18 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8

QUICKSTART GUIDE
ENGLISH
GUÍA DE INICIO RÁPIDO
ESPAÑOL
GUIDE D'UTILISATION RAPIDE
FRANÇAIS
GUIDA RAPIDA
ITALIANO
SCHNELLSTART-ANLEITUNG
DEUTSCH
SNELSTARTGIDS
NEDERLANDS

2
BOX CONTENTS
• TRUESONIC subwoofer
• Power cable
• Quickstart Guide
• Safety Instructions & Warranty Information Booklet
CONNECTION DIAGRAM
REAR PANEL OVERVIEW
1. POWER INPUT – Connect the included power cable to this
input and connect the other end of the cable to a power
source. Make sure the subwoofer's POWER SWITCH is set
to "off" when plugging and unplugging the cable.
2. POWER SWITCH – Turns the subwoofer on/off. Make sure
the VOLUME knob is set to "zero" before turning it on.
3. POWER LED – Illuminates when the subwoofer is on.
4. VOLUME – Turn this knob to adjust the subwoofer's volume.
5. INPUTS – Use standard XLR cables (not included) to
connect your sound source to these inputs. The
"LEFT/MONO" INPUT can accept either 1/4" TRS or XLR
connections. (When connecting a mono sound source, use
only the "LEFT/MONO" INPUT.)
6. OUTPUTS – Use standard XLR cables (not included) to
connect the subwoofer to the inputs of your speakers, which
can be active or passive.
7. LINK OUTPUT – Use standard XLR cables (not included) to
connect the subwoofer to the inputs of an additional amplifier
(optional).
8. SIGNAL LIMIT LED – Illuminates when the audio signal
being sent to the subwoofer is "clipping" or distorting. If this light illuminates frequently or steadily, reduce the volume of
your sound source.
9. GROUND SWITCH – Depressing this switch grounds the subwoofer, which can reduce hum or noise.
10. PHASE SWITCH – Depressing this switch reverses the polarity of the subwoofer's output signal. In some cases, this
can help reduce any interference in the frequency overlap between the subwoofer and main speaker.
11. BYPASS SWITCH – Depressing this switch activates the subwoofer's high-pass filter (80 Hz).
*
Note
:
Microphones, mixer, speakers, and
cables are not included.
Speaker* Speaker*
Microphones*
Power
Power
Subwoofer
Mixer*
1
2
3
4
55
77
66
8
910
11
Product specificaties
Merk: | Alto |
Categorie: | Speaker |
Model: | TrueSonic TS SUB 18 |
Heb je hulp nodig?
Als je hulp nodig hebt met Alto TrueSonic TS SUB 18 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Speaker Alto
25 April 2025
25 April 2025
25 April 2025
25 April 2025
25 April 2025
25 April 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025
Handleiding Speaker
- OTTO
- Verbatim
- Greenworks
- Podspeakers
- Wavemaster
- Epcom
- Amphion
- FBT
- Qian
- Targus
- LaCie
- RCA
- Defender
- Advance Acoustic
- Karcher
Nieuwste handleidingen voor Speaker
13 September 2025
13 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025