Altec Lansing VS4221 Handleiding

Altec Lansing Speaker VS4221

Lees hieronder de 📖 handleiding in het Nederlandse voor Altec Lansing VS4221 (19 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 75 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/19

User’s guide Guía del usuario

Mode d’emploi Guia do Usuário

VS4221

The lightning flash with arrowhead, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

Caution: To prevent the risk of electric shock, do not

remove cover (or back). No user-serviceable parts

inside. Refer servicing to qualified service personnel.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water – This apparatus shall not be exposed to

dripping or splashing, and no objects filled with liquids, such as vases, shall be

placed on the apparatus.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions. The apparatus should not be situated on a bed, sofa,

rug or similar surface that may block the ventilation openings. The apparatus must

not be placed in a built-in installation, such as a closed bookcase or cabinet that

may impede the flow of air through the ventilation openings. Ventilation should

not be impeded by covering the openings with items such as newspapers,

tablecloths, curtains, etc.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

9. No naked flame sources, such as lighted candles, should be placed on the

apparatus.

10. Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. If the provided plug does not fit into your

outlet, consult an electrician for the replacement of the obsolete outlet.

11. Protect the power cord from being walked on or pinched — particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

12. Do not install in an area which impedes the access to the power plug.

Disconnecting the power plug is the only way to completely remove power to the

product and must be readily accessible at all times.

13. Power source – Use only power supplies of the type specified in the operating

instructions or as marked on the appliance. If a separate power supply is included

with this apparatus, do not substitute with any other power supply – use only

manufacturer-provided power supplies.

14. Unplug this apparatus during lightning storms or when unused for long periods of

time.

15. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped. For service, refer to qualified service personnel, return to the

dealer, or call the Altec Lansing service line for assistance.

16. For products which incorporate batteries, please refer to local regulations for

proper battery disposal.

ALTEC EAR IMITEDLANSING TECHNOLOGIES, INC. ONE Y L WARRANTY

(TWO-YEAR L W I T E U A )IMITED ARRANTY N HE UROPEAN NION AND SIA

What Does The Warranty Cover?: Altec Lansing warrants that its products shall be free

from defects in materials or workmanship, with the exceptions stated below.

What Is The Period Of Coverage?: For units purchased in European Union or Asia, this

warranty runs for two year from the date of purchase. For units not purchased in

Europe or Asia, this warranty runs for one year from the date of purchase. The term of

any warranties implied by law shall expire when your limited warranty expires. Some

states and/or Member States in the European Union do not allow limitations on how

long an implied warranty lasts, so the above limitation may not apply to you.

What Does The Warranty Not Cover?: This warranty does not cover any defect,

malfunction or failure that occurs as a result of: improper installation; misuse or failure

to follow the product directions; abuse; or use with improper, unintended or faulty

equipment. (For information on proper installation, operation and use consult the

manual supplied with the product. If you require a replacement manual, you may

download a manual from www.alteclansing.com.) Also, consequential and incidental

damages are not recoverable under this warranty. Some states do not allow the

exclusion or limitation of incidental or consequential damages, so the above limitation

or exclusion may not apply to you.

What Will Altec Lansing Do To Correct The Problem?: Altec Lansing will, at its option,

repair or replace any product that proves to be defective in material or workmanship.

If your product is no longer being manufactured, or is out of stock, at its option, Altec

Lansing may replace your product with a similar or better Altec Lansing product.

How To Get Warranty Service: To get a covered product repaired or replaced, you must

contact Altec Lansing during the warranty period by email (csupport@alteclansing.com).

You must include in your email, your name, address, email address, telephone number,

date of purchase and a complete description of the problem you are experiencing.

In the United States, you may alternatively contact Altec Lansing by telephone at

1-800-ALTEC88 — please be prepared to provide the same information. If the problem

appears to be related to a defect in material or workmanship, Altec Lansing will

provide you a return authorization and instructions for return shipment. Return

shipments shall be at the customer's expense, and the return must be accompanied by

the original proof of purchase. You should insure the shipment as appropriate because

you are responsible for the product until it arrives at Altec Lansing.

How Will State Law Affect Your Rights?: This warranty gives you specific legal rights,

and you may also have other rights which vary from state to state. Please note that in

the European Union, you as a consumer might have other legal rights under national

legislation of European Union Member States governing the sale of Altec Lansing’s

goods. Those rights are not affected by this guarantee.

The above limited warranties and remedies are sole warranties and remedies available

to purchaser, if, and to the extent, valid and enforceable under the applicable law.

C SUSTOMER ERVICE

The answers to most setup and performance questions can be found in the

Troubleshooting guide. You can also consult the FAQs in the customer support section

of our Web site at www.alteclansing.com. If you live in North America and still can’t

find the information you need, please call our customer service team for assistance

before returning the speakers to your retailer under their return policy.

Tel: 800-258-3288

Email: csupport@alteclansing.com

If you live outside of North America, please visit our website at www.alteclansing.com

and select your region to locate your country’s distributor.

For the most up-to-date information, be sure to check our Web site at

www.alteclansing.com.

Designed and engineered in the USA and manufactured in our ISO9002 certified

factory. United States Patents 4429181 and 4625328 plus other patents pending.

INTERNATIONAL DISTRIBUTION

International customers: For information regarding the distribution of Altec Lansing

products in your country, please visit and click on your region.www.alteclansing.com

FCC NOTE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may

cause undesired operation.

CAUTION

To prevent electric shock do not use this (polarized) plug with an

extension cord, receptacle or other outlet unless the blades can be fully

inserted to prevent blade exposure.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

C P C SONNECTING THE OWER ORD (AC WALL OCKET)

Long slot is neutral

(ground) side.

Insert the wide blade into the

ground side slot.

Thank you for purchasing this Altec Lansing product. For generations, Altec

Lansing has been first in audio innovation. Today, our line of powered

speakers has received more performance awards than any other brand. In

all kinds of desktop environments, in every price range, Altec Lansing offers

sound of distinction — giving even the most demanding customers the

audio enjoyment they seek. Just listen to this!

Box Contents

• Two speakers and one subwoofer

• Wireless remote

• Remote mounting bracket

• 3.5mm stereo cable

• User’s guide

• Quick connect instructions (located on inner-flap of the package)

Placing Speakers

Subwoofer

All stereo-encoded information is heard through the satellite speakers. The

subwoofer contains no stereo imaging, and its sound is non-directional. As a

result, the subwoofer doesn’t have to be placed in any particular relationship

to the satellites. However, placing the subwoofer on the floor close to a wall

or room corner provides better bass efficiency and optimum sound.

Warning: The subwoofer is not magnetically shielded. As such, it SHOULD

be placed at least 2 feet (0.6m) from TVs, computer monitors, computer

hard drives or any other magnetic media (e.g. floppy disks, Zip disks,

computer or audio tapes, etc.).

Satellite Speakers

Arrange the satellite speakers to suit your listening tastes — from right next

to the monitor to as far apart as the speaker cords allow.

For optimum sound, satellite speakers should be placed in a left/right

configuration, preferably apart and at equal distance from the center of the

listening area. This will offer the best stereo imaging and provide the most

satisfying results.

Note: The satellite speakers ARE magnetically shielded and can be placed

close to video displays such as TVs and computer monitors without

distorting the image.

Making Connections

Warning: Do not insert the speaker system’s power plug into a wall outlet

until all connections are made. Also, turn off audio source (i.e., your PC,

MP3 player, Sony PlayStation, etc.) before connecting the outputs to the

speaker system’s inputs.

To ensure first-time operation as expected, please carefully follow the

connection sequences described below in the order indicated.

Speaker System

1. Connect the right satellite speaker (with a thicker cable and orange DIN

connector) to the orange input on the back of the subwoofer, labeled

RIGHT. Note that the arrow on the DIN connector must face up.

2. Connect the left satellite speaker (with a thinner cable and a brown RCA

connector) to the brown input on the back of the subwoofer, labeled LEFT.

3. Connect one end of the audio input cable (with lime green connectors at

each end) to the matching lime green input plug on the back of the

subwoofer, labeled INPUT.

4. Connect the other end of the audio input cable to your desired audio

source.

Inputs

Various connection schemes between your audio source and the speaker

system are available. Determine if you’ll be setting up the speaker system

for PC audio/PC gaming, DVD playback, console gaming or with portable

audio devices (such as MP3 or portable CD players), then skip to the

appropriate section.

PC Audio/PC Gaming/DVD Playback

All PC sound cards have audio outputs. Typically, the outputs will be marked

as “front output” and “rear output.” In some cases, slightly different

terminology may be used. The sound card’s documentation should help you

determine which outputs to use with your speaker system.

Connect the lime green 3.5mm stereo cable to the lime green input labeled

“FRONT” on your sound card.

Console Gaming

Most console game systems feature dual-RCA outputs. To connect your

speakers, follow the steps below:

1. Make sure the power to your console gaming system is turned off.

2. Locate the red and white RCA cable that came with your console

gaming system.

3. Connect one end of the RCA cable to the matching red and white RCA

jacks located on the back of the subwoofer, and the other end to the back

of your console gaming system.

Portable Audio Devices (MP3, Portable CD Players, etc.)

Connect the lime green 3.5mm stereo cable to the headphone jack on your

portable audio device.

POWERING ON

1. After all other connections are made, plug the AC power cord (on the

back of subwoofer) into a wall outlet. The speaker system is now ready

to operate.

2. Turn on the audio source.

3. Turn on the speaker system by either simultaneously pressing the “+” and

“–” buttons located on the side of the right satellite, or by pressing the

stand-by button on the wireless remote. An LED will light on the front

of the right satellite when the power is ON.

4. Install the supplied battery in the remote’s battery compartment.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace

only with the same or equivalent type

Note: To avoid hearing a popping sound when you turn on your Altec

Lansing speaker system, always turn on your audio source first.

Volume

The “+” and “–” buttons on the side of the right satellite control the

master volume. The “+” and “–” buttons marked with the word “volume”

on the wireless remote also control the master volume. Press the “+”

button to increase the volume, and press the “–” to decrease the volume.

Treble

The “+” and “–” buttons marked with the word “treble” on the wireless

remote control the treble. Press the “+” button to increase the treble, and

press the “–” to decrease the treble.

Bass

The “+” and “–” buttons marked with the word “bass” on the wireless

remote control the bass. Press the “+” button to increase the bass, and

press the “–” to decrease the bass.

Loudness

The button marked with the word "loud" on the wireless remote contours

the high and low frequencies to maximize the perceived audio.

VS4221 Three-Piece

Powered Audio System

Product specificaties

Merk:	Altec Lansing
Categorie:	Speaker
Model:	VS4221
Soort:	TV/Monitor luidsprekers
Gemiddeld vermogen:	35 W
Gemiddeld vermogen subwoofer:	19 W
Audio-uitgangskanalen:	2.1 kanalen
Diameter driver subwoofer (imperiaal):	6.5 "
Frequentiebereik:	40 - 20000 Hz
Gevoeligheid:	98 dB
Signaal/ruis-verhouding:	80 dB
Totale harmonische vervorming (THD):	10 procent
Frequentiebereik subwoofer:	40 - 160000 Hz
Afmetingen subwoofer (B x H x D):	200 x 245 x 340 mm
Aantal satellieten:	2
Gemiddeld vermogen satelietluidsprekers:	8 W
Diameter mid-range driver:	28 mm
Afmetingen surroundluidspreker (B x H x D):	115 x 118 x 262 mm
Freqentiebereik satellietluidspreker:	160 - 20000 Hz
Diameter driver satellietluidspreker:	3 "