Altair Groda 52863-BAT-WH-FB Handleiding

Bekijk gratis de handleiding van Altair Groda 52863-BAT-WH-FB (2 pagina’s), behorend tot de categorie badkuip. Deze gids werd als nuttig beoordeeld door 46 mensen en kreeg gemiddeld 4.0 sterren uit 3 reviews. Heb je een vraag over Altair Groda 52863-BAT-WH-FB of wil je andere gebruikers van dit product iets vragen? Stel een vraag

B) Protect your Tub.

Before commencing and installation, ensure the Tub is completely protected, leave covering

in place until the bathroom is complete. Scratches and damage incurred during installation

are not covered by the warranty.

TOOLS REQUIRED FOR INSTALLATION

51167-BAT-WH-FB

Spirit Level Wrench Tape Marking Pencil Silicone Gun

Step 1

Adjust the tub feet until the tub base is 3mm above the floor;

This can be done by turning the feet bars accordingly;

Then use wrench to tighten the nuts on the bars.

See figure 1

IMPORTANT:

* Two people are required for installation.

* Freestanding tub is not designed to take weight on the rim.

Do not sit or stand on the tub rim.

Figure 1

Receive Your Tub

Feet set at 3mm above the floor

A) Unpack and check for damage.

After receiving your tub, please unpack and remove all covering, checking whether there is

any damage. Repack the tub if it is not being immediately installed. It will be rejected any

claim for damage if not notified in a timely manner.

Step 2

Mark the floor with the outline of the tub, at the final installation position with the marking

pencil.

Please retain this manual after installation for future reference and

maintenance

Product must be installed in compliance with relevant Water Bylaws

52863-BAT-WH-FB

Altair Inc.

Product specificaties