Alpine SWD-2030 Handleiding

Alpine Autospeaker SWD-2030

Lees hieronder de đź“– handleiding in het Nederlandse voor Alpine SWD-2030 (10 pagina's) in de categorie Autospeaker. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
SWD-2030
Class-D Amplified Subwoofer
• OWNER’S MANUAL
Please read before using this equipment.
• BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
LĂ©alo antes de utilizar este equipo.
• ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare l’attrezzatura.
• ANVÄNDARHANDLEDNING
Innan du använder utrustningen bör du läsa igenom denna användarhandledning.
EN
DE
FR
ES
IT
SE
1
SWD-2030
Class D Amplified Subwoofer
Please follow these instructions for your safety
• Introduction:
Please read this owners manual thoroughly to familiarise yourself with each control and function. We at
Alpine hope that your new SWD-2030 will give you many years of listening enjoyment.
In case of problems when installing your SWD-2030, please contact your authorised Alpine dealer.
Owners Manual
This symbol means important instructions.
Failure to heed them can result in serious injury or death.
CAUTION
DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock.
KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT OF THE REACH OF
CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a doctor
immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do to may result
in fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are
not sure.) Failure to do so may result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to electrical shorts.
DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power
to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire
or electric shock.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange
the wiring and cables in compliance with the manual to prevent obstructions when driving. Cables
or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals,
etc. can be extremely hazardous.
DO NOT DAMAGE PIPES OR WIRING WHEN DRILLING HOLES. When drilling holes in
the chassis for installation, take precautions so as not to contact, damage or obstruct pipes,
fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.
EN
2
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURLEY. Be sure to use only
the specified accessory parts. Use of other than designated parts may damage this unit internally
or may not securely install the unit in place. This may cause parts to become loose resulting in
hazards or product failure.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE
GROUND CONNECTIONS. Bolts or nuts used for the brake, steering systems (or any other safety
related system), or any storage tanks should NEVER be used for installations or ground
connections. Using such parts could disable control of the vehicle and/or cause fire, etc.
HALT USE IMMEDIATLEY IF A PROBLEM APPEARS. Failure to do so may cause personal
injury or damage to the product. Return it to your Authorised Alpine Dealer or the nearest Alpine
Service Centre for repairing.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY
DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle in a safe location before
performing these functions, Failure to do so may result in an accident.
This symbol means important instructions.
Failure to heed them can result in injury or property damage
CAUTION
MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire
or product damage.
ROUTE THE WIRING TO ENSURE IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL
EDGE. Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed
edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in
metal, use a rubber grommet to prevent the wires insulation from being cut by the metal edge of
the hole.
DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside
and may result in fire.
HAVE THE WIRING AND INSTALLATION DONE BY AN EXPERT. The wiring and installation of
this unit requires special technical skill and experience. To ensure safety, always contact the
dealer where you purchased this product to have the work done.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit in
locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE
DRIVING. Failure to do so may result in an accident.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed
application may result in fire, electric shock or injury.
EN
3


Product specificaties

Merk: Alpine
Categorie: Autospeaker
Model: SWD-2030

Heb je hulp nodig?

Als je hulp nodig hebt met Alpine SWD-2030 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Autospeaker Alpine

Handleiding Autospeaker

Nieuwste handleidingen voor Autospeaker