Alpine KTX-H12 Handleiding

Alpine Subwoofer KTX-H12

Lees hieronder de 📖 handleiding in het Nederlandse voor Alpine KTX-H12 (4 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
IMPORTANT NOTICE!
PLEASE READ FIRST BEFORE INSTALLING LINK KIT
Congratulations on your purchase from Alpine. Your listening satisfaction is
important to us. In order to ensure proper installation
of
your new enclosure the
following guidelines are being provided. Please read this notice carefully
before installing the link kit or remounting the subwoofer.
1.) When installing your provided linking kit follow the steps in the instruction
manual.
2.)Avoid over tightening screws
-
If
remounting a subwoof er or installing a linking each kit start provided
machine screw thread by hand with the included hex key wrench.
- Once each screw is started use a drill torque setting
of
low to fasten.
3.)Do not use an Impact Driver Drill for hardware Installation.
4.)Ifusing the KTE-l0G, or KTE-12G Grille Kit do not use the supplied wood
screws, instead use the 40mm machine screws pre-installed with the enclosure.
5.
)Each Enclosure is wired to a 2 Ohm Load,
if
enclosures are wired in parallel
check that your amplifier is 1 Ohm Stable.
Failure to follow these guidelines may result in enclosure damage which will
void your warranty.
If
further assistance is necessary, please contact your Alpine authorized dealer.
KTX-H12 & KTX-H10 Linking Kit Installation Manual
Compatible with the following models:
R-SB12V, R-SB10V, S-SB12V, S-SB10V
Introduction
Congratulations on purchasing the KTX-H12 or H10. This installation manual is designed to take you through the
step-by-step installation of the linking your ‘R’ or ‘S’ Series Halo Enclosures Together. Please familiarize yourself with
the owners manual and if you still have additional questions please call 1-800-TECH-101.
Note: To ensure safe use, Always follow these precautions.
The installation of this product requires specialized skills and experience. We recommend that you have the product
installed by an Alpine authorized dealer.
Before you use this product, be sure to carefully read this installation manual so that you can use the product
correctly, Failing to do so could lead to damaged equipment or an accident. Alpine Electronics bears no responsibility
for problems that arise as a result of failure to follow the instructions in the manual.
Make sure enclosure is secured to the vehicle. Failing to do so can lead to electric shock, injury or damage to
equipment.
When making a hole in the vehicle body, be careful to avoid damaging pipes, the fuel tank, electrical wiring,
and the like. This kind of damage could lead to an accident or fire.
Do not install the product where it may be exposed to water or in a place with high levels of humidity or dust.
Doing so could lead to fire or damaged equipment.
Start all screw threads by hand and avoid overtourqing screws, failure to do so may damage your equipment.
1
If using the KTE-10G, or KTE-12G Grille Kit do not use the supplied wood screws, instead use the 40mm
machine screws pre-installed with the enclosure.
Tools Required
Hex Key Driver (Included) Power Drill with a Low Torque Setting (Optional)
Accessory List
Front Port Link (1 Pc) Front Port Brace (2 Pcs)
Front Port Link M5X25 Hardware Screws (4Pcs) Rear Link M5X14 Hardware Screws (8 Pcs)
Center Alignment Hardware (4 Pcs) Rear Link Plate (1 Pcs)
2


Product specificaties

Merk: Alpine
Categorie: Subwoofer
Model: KTX-H12

Heb je hulp nodig?

Als je hulp nodig hebt met Alpine KTX-H12 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Subwoofer Alpine

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer