Allen & Heath Xone:32 Handleiding

Allen & Heath Niet gecategoriseerd Xone:32

Lees hieronder de 📖 handleiding in het Nederlandse voor Allen & Heath Xone:32 (25 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 110 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/25
USER GUIDE
Publication AP4264
2 XONE:32 User Guide
This product complies with the European Electromagnetic Compatibility
directives 89/336/EEC & 92/31/EEC and the European Low Voltage
Directives 73/23/EEC & 93/68/EEC.
This product has been tested to EN55103 Parts 1 & 2 1996 for use in Environments E1,
E2, E3, and E4 to demonstrate compliance with the protection requirements in the
European EMC directive 89/336/EEC. During some tests the specified performance
figures of the product were affected. This is considered permissible and the product has
been passed as acceptable for its intended use.
Allen & Heath has a strict policy of ensuring all products are tested to the latest safety
and EMC standards. Customers requiring more information about EMC and safety
issues can contact Allen & Heath.
NOTE: Any changes or modifications to the console not approved by Allen & Heath
could void the compliance of the console and therefore the users authority to operate it.
XONE:32 User Guide AP4264 Issue 6
Copyright © 2004 Allen & Heath Limited. All rights reserved
Allen & Heath Limited
Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK
http://www.allen-heath.com
Limited One Year Warranty
This product is warranted to be free from defects in materials or workmanship for a period of
one year from the date of purchase by the original owner.
To ensure a high level of performance and reliability for which this equipment has been
designed and manufactured, read this User Guide before operating.
In the event of a failure, notify and return the defective unit to ALLEN & HEATH or its
authorised agent as soon as possible for repair under warranty subject to the following
conditions
Conditions Of Warranty
1. The equipment has been installed and operated in accordance with the instructions in
this User Guide
2. The equipment has not been subject to misuse either intended or accidental, neglect, or
alteration other than as described in the User Guide or Service Manual, or approved by
ALLEN & HEATH.
3. Any necessary adjustment, alteration or repair has been carried out by ALLEN &
HEATH or its authorised agent.
4. This warranty does not cover crossfader wear and tear.
5. The defective unit is to be returned carriage prepaid to ALLEN & HEATH or its
authorised agent with proof of purchase.
6. Units returned should be packed to avoid transit damage.
In certain territories the terms may vary. Check with your ALLEN & HEATH agent for any
additional warranty which may apply.
XONE:32 User Guide 3
Important Safety Instructions – Read First
Read instructions: Retain these safety and operating instructions for future reference. Adhere to all
warnings printed here and on the console. Follow the operating instructions printed in
this User Guide.
Do not open: Operate the console with its front and crossfader panels correctly fitted. Disconnect
mains power by unplugging the power cord if a panel needs to be removed for
servicing. Refer this work to competent technical personnel only.
Power sources: Connect the console to a mains power only of the type described in this User Guide and
marked on the rear panel. The power source must provide a good ground connection.
Power cord: Use the power cord with sealed mains plug appropriate for your local mains supply as
provided with the console. If the provided plug does not fit into your outlet consult your
service agent for assistance. Route the power cord so that it is not likely to be walked
on, stretched or pinched by items placed upon or against it.
Grounding: Do not defeat the grounding and polarisation means of the power cord plug. Do not
remove or tamper with the ground connection in the power cord.
Ventilation: Do not obstruct the ventilation slots or position the console where the air flow required
for ventilation is impeded. If the console is to be operated in a rack unit or flightcase
ensure that it is constructed to allow adequate ventilation.
Moisture: To reduce the risk of fire or electric shock do not expose the console to rain or moisture
or use it in damp or wet conditions. Do not place containers of liquids on it which might
spill into any openings.
Heat: Do not locate the console in a place subject to excessive heat or direct sunlight as this
could be a fire hazard. Locate the console away from any equipment which produces
heat such as power supplies, power amplifiers and heaters.
Environment: Protect from excessive dirt, dust, heat and vibration when operating and storing. Avoid
tobacco ash, drinks spillage, and smoke, especially that associated with smoke
machines.
Handling: To prevent damage to the controls and cosmetics avoid placing heavy objects on the
control surface, scratching the surface with sharp objects, or rough handling and
vibration. Protect the controls from damage during transit. Use adequate packing if you
need to ship the unit.
Servicing: Switch off the equipment and unplug the power cord immediately if it is exposed to
moisture, spilled liquid, objects fallen into the openings, the power cord or plug become
damaged, during lightening storms, or if smoke, odour or noise is noticed. Refer
servicing to qualified technical personnel only.
Installation: Install the console in accordance with the instructions printed in this User Guide. Do not
connect the output of power amplifiers directly to the console. Use audio connectors
and plugs only for their intended purpose.
Important Mains Plug Wiring Instructions
The console is supplied with a moulded mains plug fitted to the AC mains power lead.
Follow the instructions below if the mains plug has to be replaced.
The wire which is coloured Green/Yellow or Green must be connected to the terminal in
the plug which is marked with the letter E or with the Earth symbol.
This appliance must be earthed.
The wire which is coloured Blue or White must be connected to the terminal in the plug
which is marked with the letter N.
The wire which is coloured Brown or Black must be connected to the terminal in the
plug which is marked with the letter L.
Ensure that these colour codes are followed carefully in the event of the plug being
changed.

Product specificaties

Merk: Allen & Heath
Categorie: Niet gecategoriseerd
Model: Xone:32

Heb je hulp nodig?

Als je hulp nodig hebt met Allen & Heath Xone:32 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Allen & Heath

Allen & Heath

Allen & Heath Avantis Handleiding

6 Januari 2024
Allen & Heath

Allen & Heath iLive MADI 64 Handleiding

28 Mei 2023
Allen & Heath

Allen & Heath GS1 Handleiding

24 Mei 2023
Allen & Heath

Allen & Heath MPS9G Handleiding

9 Mei 2023
Allen & Heath

Allen & Heath DR128 Handleiding

8 Mei 2023
Allen & Heath

Allen & Heath SR20 Handleiding

5 Mei 2023
Allen & Heath

Allen & Heath SQ6 Handleiding

2 Mei 2023
Allen & Heath

Allen & Heath DT168 Handleiding

1 Mei 2023
Allen & Heath

Allen & Heath Keymix Handleiding

30 April 2023
Allen & Heath

Allen & Heath GL2 Handleiding

25 April 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024