Allen & Heath MPS12 Handleiding

Allen & Heath Niet gecategoriseerd MPS12

Lees hieronder de 📖 handleiding in het Nederlandse voor Allen & Heath MPS12 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 59 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

Console Power Supply

USER GUIDE

USER GUIDEUSER GUIDE

Publication AP5739

MPS12

2 MPS12 User Guide

This product complies with the European Electromagnetic

Compatibility directives 89/336/EEC & 92/31/EEC and the

European Low Voltage Directives 73/23/EEC & 93/68/EEC.

Any changes or modifications to the power supply unit not approved by Allen

& Heath could void the compliance of the product and therefore the user’s

authority to operate it.

MPS12 User Guide AP5739 Issue 1.

Manufactured in the United Kingdom by Allen & Heath Limited

Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK

http://www.allen-heath.com

Limited One Year Warranty

This product has been manufactured in the UK by ALLEN & HEATH and is

warranted to be free from defects in materials or workmanship for a period of one

year from the date of purchase by the original owner.

To ensure a high level of performance and reliability for which this equipment has

been designed and manufactured, read this User Guide before operating.

In the event of a failure, notify and return the defective unit to ALLEN & HEATH or

its authorised agent as soon as possible for repair under warranty subject to the

following conditions:

Conditions Of Warranty

1. The equipment has been installed and operated in accordance with the

instructions in this User Guide

2. The equipment has not been subject to misuse either intended or accidental,

neglect, or alteration other than as described in the User Guide or Service

Manual, or approved by ALLEN & HEATH.

3. Any necessary adjustment, alteration or repair has been carried out by

ALLEN & HEATH or its authorised agent.

4. The defective unit is to be returned carriage prepaid to ALLEN & HEATH or its

authorised agent with proof of purchase.

5. Units returned should be packed to avoid transit damage.

In certain territories the terms may vary. Check with your ALLEN & HEATH agent

for any additional warranty, which may apply.

MPS12 User Guide 3

Important Safety Instructions

WARNINGS - Read the following before proceeding:

ATTENTION: RISQUE DE CHOC ELECTRIQUE – NE PAS OUVRIR

Read instructions: Retain these safety and operating instructions for future reference. Adhere to

all warnings printed here and on the power supply unit. Follow the operating

instructions printed in this User Guide.

Do not remove covers: Operate the power supply unit with its covers correctly fitted. Refer any

service work on the power supply unit to competent technical personnel only.

Power sources: Connect the power supply unit to a mains power supply only of the type

described in this User Guide and marked on the rear panel. Use only the

power cord with sealed mains plug appropriate for your local mains supply

as provided with the power supply unit. If the provided plug does not fit into

your outlet consult your service agent for assistance.

Power cord routing: Route the power cord so that it is not likely to be walked on, stretched or

pinched by items placed upon or against it.

Grounding: Do not defeat the grounding and polarisation means of the power cord plug.

Do not remove or tamper with the ground connection in the power cord.

Water and moisture: To reduce the risk of fire or electric shock do not expose the power supply

unit to rain or moisture or use it in damp or wet conditions. Do not place

containers of liquid on it which might spill into any openings.

Ventilation: Do not obstruct the ventilation slots or position the power supply unit where

the air flow required for ventilation is impeded. If the power supply unit is to

be operated in a flightcase, ensure that it is constructed to allow adequate

ventilation.

Heat and vibration: Do not locate the power supply unit in a place subject to excessive heat or

direct sunlight as this could be a fire hazard. Locate the power supply unit

away from any equipment which produces heat or causes excessive

vibration.

Servicing: Switch off the equipment and unplug the power cord immediately if it is

exposed to moisture, spilled liquid, objects fallen into the openings, the

power cord or plug become damaged, during lightening storms, or if smoke,

odour or noise is noticed. Refer servicing to qualified technical personnel

only.

Installation: Install the power supply unit in accordance with the instructions printed in this

User Guide. Do not connect the output of power supply unit to any other

equipment other than that specified by Allen & Heath.

CAUTION

WARNING: This equipment must be earthed.

Product specificaties

Merk:	Allen & Heath
Categorie:	Niet gecategoriseerd
Model:	MPS12
Kleur van het product:	Zwart
Kleur behuizing:	Zwart
Compatibele producten:	WZ3, GL2400-16/24/32
Type koeling:	Actief