Alfresco AXEFWC Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Alfresco AXEFWC (4 pagina's) in de categorie Warmtelade. Deze handleiding was nuttig voor 2 personen en werd door 1.5 gebruikers gemiddeld met 4.4 sterren beoordeeld

Pagina 1/4
Please follow the next simple steps to install the AXEFWC Cart Mounted Food Warmer.
Only a standard Philips screw driver is required:
STEP 1:
Remove the existing left side table
by lifting and slinding out from the
support brackets.
STEP 2:
Remove the existing brackets by
loosening and removing the four
STEP 3:
Install the new support bracket
with four 10-32 pan head screws
provided.
Tighten screws securely with a
standard Philips screw driver.
STEP 4:
Install the AXEFW food warmer
over the bracket and let it rest on
the bottom step of the support
bracket.
Align the front of the AWEFW
food warmer with the front of your
BBQ unit.
ALIGN
FRONT
STEP 5:
Install the small (12” long) lock
bracket on the right side of the
unit support bracket.
This will prevent the AXEFW from
lifting out and will permanently
lock it in place.
Use two 10-32 screws provided.
STEP 6:
Install the left side finish cover
panel to the AXEFW unit.
The panel is installed under the
top perimeter of the AXEFW unit.
The finish panel is supported with
an additional 12” long lock bar.
Use two 10-32 screws provided.


Product specificaties

Merk: Alfresco
Categorie: Warmtelade
Model: AXEFWC

Heb je hulp nodig?

Als je hulp nodig hebt met Alfresco AXEFWC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden