Akai ACR-3088 Handleiding

Bekijk gratis de handleiding van Akai ACR-3088 (10 pagina’s), behorend tot de categorie Horloge. Deze gids werd als nuttig beoordeeld door 45 mensen en kreeg gemiddeld 5.0 sterren uit 3 reviews. Heb je een vraag over Akai ACR-3088 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ACR-3088 PORTABLE

USER MANUAL

EN - ENGLISH

DESCRIPTION

1.ON/OFF/FM/AM

2.HOUR/TU-

3.MIN/TU+

4.SLEEP/SNOOZE

DIMMER HI/LOW

5.AL 1 / VOL-

6.AL 2 /VOL+

7.SET/PRE M+

8.LEDDISPLAY

9.BATTERY COMPARTMENT

10.SPEAKER

11.AC POWER CORD

12.WIRE ANTENNA

CONNECTING THE DEVICE

PLUG

THE AC CORD INTO THE POWER OUTLET.WHENELECTRICALPOWER

HASBEENINTERRUPTEDANDRESTORED,THECLOCKDISPLAYWILL SHOW

THETIME.MAKESURETORESETBOTHTHECORRECTTIMEANDALARM

TIMEFORPROPEROPERATION.

TIME SETTING

ON TIME DISPLAY MODE, PRESS AND HOLD THE SET/PRE M+ (7), THEN THE

CLOCK DISPLAY WILL BLINK. PRESS THE MIN/TU+ (3) OR HOUR/TU- (2) TO

SET THE CLOCK DISPLAY TO THE CORRECT TIME. PRESS SET /PRE M+ (7)

AGAIN WHEN FINISHED THE SETTING, THE TIME DISPLAY WILL NOT BLINK.

IT IS 12-HOUR DISPLAY FORMAT, LED INDICATOR WILL LIGHT UP WHEN THE

DISPLAY TIME IS PM.

DISPLAY BRIGHTNESS

ONTIME DISPLAY MODE, USE THE DIMMER HI/LOW (4) TO ADJUST THE

DISPLAY BRIGHTNESS. SELECT FROM: LIGHTAND DARK.

RADIO OPERATION

1.UNCOIL THE WIRE ANTENNA (12).

2.PRESS ON/OFF(1) ONCE, IT WILL TURN ON THERADIO.

3.PRESS FM/AM (1) TO SELECT FM OR AM RADIO.

4.WHEN THE RADIO IS TURN ON IN FM MODE, LED INDICATOR NEXT TO

“FM” WILL LIGHT UP. THE LED INDICATOR WILL OFF WHEN RADIO IS IN

AM MODE.

5.PRESS MIN/TU+ (3) OR HOUR / TU-(2) TO ADJUST YOUR DESI

RED

FREQUENCY.

6.PRESS AL 2/VOL + (6) TO INCREASE THE VOLUME, THE MAXIMUM LEVEL

UP TO LEVEL 16. PRESS AL 1/VOL-(5) TO DECREASE THE VOLUME, THE

MINIMUM LEVEL OF VOLUME IS LEVEL 0.

Note:

If the reception is too weak and there is interference on the received station, try to improve the reception

by altering the position and uncoiling or coiling the antenna.

MEMORY OPERATION

THE CLOCK RADIO CANSTORE 10FM PRESETS AND 10AM PRESETS.

1.ON RADIO PLAYING MODE, PRESS UP MIN/TU+ (3) OR HOUR / TU-(2) TO

CHOOSE YOUR DESIRED FREQUENCY.

2.PRESS SET/PRE M+ (7) FOR APPROX. 3 SECONDS, A PRESET NUMBER

WILLSHOW ANDFLASH ON THE LED DISPLAY (8). THEN SHORT PRESS

HOUR/TU- (2) OR MIN/TU+ (3) TO SELECT YOUR DESIRED MEMOR

Y

NUMBERS FROM P1 T

O P10.

3.SELECT A PRESET LOCATION WITH BUTTONS MIN/TU+ (3) OR HOUR/TU-

(2). PRESS THE SET/PRE M+ BUTTON ONE MORE. THE STATION IS

PRESET.

REPEAT THE ABOVE STEPS, YOU CAN STORE YOURDESIRED STATIONS.

AFTER SETTING IS OK, PRESS SET/PRE M+ (7) TO SELECT YOUR PRESET

FREQUENCY TO ENJOY RADIO BROADCASTING.

ALARM FUNCTION

•SET THE CORRECT VOLUME AND THE STATION AHEAD OF THE TIME.

THE DEVICE SWITCHES ON WITH THE LAST SET VOLUME.

•WHEN THE ALARM TIME IS REACHED, A DOT FLASHES NEXT TO “

AL1

BUZZER” OR “AL1 RADIO” AND “AL2 BUZZER” OR “AL2 RADIO”.

SETTING

OF THE ALARM (IN STANDBY MODE)

YOU CAN SET TWO ALARM TIMES AS BELOW PROCEDURES:

1.PRESS THE AL1/VOL- BUTTON (5) FOR APPROX. 3 SECONDS.

THE

INDICATOR BEGINS TO FLASH.

2.SET

THE HOURS WITH THE HOUR/TU- BUTTON (2) AND THE MINUTES

WITH MIN/TU+ BUTTON (3).

3.TH

EN

USE THE AL1/VOL- BUTTON TO SELECT HOW YOU WANT TO

BE WOKEN UP. SELECT FROM:

•BUZ

Z

ER

A BUZZER SOUNDS WHEN THE ALARM TIME IS REACHED. T

HE

VOLUME OF THE BUZZER CANNOT BE ADJUSTED.

•LAST

HEARD RADIO FREQUENCY

AS SOON AS YOUR SET ALARM TIME IS SHOWN, THE RADI

O

SWITCHES ON. THE LAST TUNED FM STATION PLAYS AT THE LAST

SET

VOLUME.

4.AFTER YOU HAVE MADE THE SETTING, THE SELECTED ALARM TIM

E

FLASHES FOR CA. 3 SECONDS. THE ALARM TIME IS STORED. THEN

THE

CURRENT TIME IS DISPLAYED.

TO SET THE SECOND ALARM TIME, REPEAT THE ABOVE STEPS WITH THE

AL2/VOL+ BUTTON (6).

P.1

P.2

Product specificaties