Airlive 2.5GE XPON ONU Handleiding

Airlive Niet gecategoriseerd 2.5GE XPON ONU

Bekijk gratis de handleiding van Airlive 2.5GE XPON ONU (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.9 sterren uit 2.5 reviews. Heb je een vraag over Airlive 2.5GE XPON ONU of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/4
AirLive 2.5GE XPON ONU
Quick Installation Guide
V3 .0
AirLive 2.5GE XPON ONU Q 3 IG_V .0
1. Indicator and Interface Description
Figure 1 2.5GE XPON ONU
1.2 Application Chart
Figure 2 Application Chart
1.3 Panel Lights
Figure 3 Panel Lights
AirLive 2.5GE XPON ONU Q 3 IG_V .0
LED
Mark
Status
Description
System
SYS
On / Off
System is not running or fatal error.
Blink
Normal running.
Registration
PON
On
The device is registered to the PON system.
Off
The device is not registered to the PON
system.
Blink
The device is registering.
Optical signal
loss
LOS
Blink
Device does not receive optical signal.
Off
Device receives optical signal.
LAN
LAN1
LAN2
On
Port is connected properly.
Off
Port connection exception or not connected.
Blink
Port is sending or/and receiving data.
Table 1 Panel Lights
1.4 Interface/button Panel
1 2 3 4 5
Figure 4 Interface/button P anel
Name
Function
1: PON
Connect to OLT by SC type fiber connector, single mode optical fiber cable.
2/3: LAN1/2
The blue LAN2 is 2.5GbE port and the yellow LAN1 is 1GE port. Connect to
PC or other devices with Ethernet port by Cat5/Cat5E cable, RJ-45
connector.
4: RST
Press RST button over 10 seconds, ONU restores factory default and
reboots.
5: DC 12V
Connect with power adapter. DC 12V, 0.5A.
Table 2 Interface/button Panel


Product specificaties

Merk: Airlive
Categorie: Niet gecategoriseerd
Model: 2.5GE XPON ONU

Heb je hulp nodig?

Als je hulp nodig hebt met Airlive 2.5GE XPON ONU stel dan hieronder een vraag en andere gebruikers zullen je antwoorden