After Later Audio Bleep Bloop 2k Handleiding
After Later Audio
Niet gecategoriseerd
Bleep Bloop 2k
Bekijk gratis de handleiding van After Later Audio Bleep Bloop 2k (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 63 mensen en kreeg gemiddeld 4.9 sterren uit 32 reviews. Heb je een vraag over After Later Audio Bleep Bloop 2k of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
BLEEP BLOOP 2K
Description
Introduction
Bleep Bloop 2000, or BB2k is a collaboration between Tim Held of Podular
Modcast and After Later Audio. What started as a joke-module made by Tim’s
friend Jenny has now actualized into real-life. What is it? Why is it? These
are all questions we are still asking ourselves. All we know is we love it.
Overview
BB2k can be used as a four-voice oscillator or a quirky CV-source. It was
designed to inspire experimentation and creative patching. While it appears
simple at face-value, it is actually quite versatile. BB2k is able to get
into glitchy rhythm generation, haunting drones and outrageous control
voltage over any parameter the user wishes. Just power it on and start
exploring!
The module can be divided into 4 different sections: 4 Oscillators, Splarf 1
and 2 Switch, a Crossfader and a VCA.
Oscillators
There are 4 oscillators that all come out of the module’s only output. Each
is independently controllable via a pitch knob or via CV, and all 4 range
from LFO to audible frequencies. Depending on the module’s settings, the 4
oscillators are either a Sine, Triangle or Square wave. These oscillators DO
NOT track 1 v/o.
Splarf
The Splarf Switch selects between 2 banks of waveforms. In the Splarf 1
position all Oscillators will either be a Sine or Triangle wave, and in
Splarf 2 Oscillators A and B are Sine waves while C and D are Triangle, or
all 4 are Square waves (depending on the Crossfader position).
Crossfader
The crossfader blends the different waveforms of each Splarf section
together. If the module is set to Splarf 1 and the Crossfader is completely
counter-clockwise, then the output will be 4 Triangle waves, and when
completely clockwise 4 Sine waves. When the Splarf is set to 2 then
completely CCW will have an output of 4 Square waves and completely CW 2
Triangle and 2 Sine waves. There is also a CV input to control the crossfade.
VCA
The VCA accepts gates and envelopes to control the module's output.
Product specificaties
| Merk: | After Later Audio |
| Categorie: | Niet gecategoriseerd |
| Model: | Bleep Bloop 2k |
Heb je hulp nodig?
Als je hulp nodig hebt met After Later Audio Bleep Bloop 2k stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd After Later Audio
10 April 2023
7 Februari 2023
7 Februari 2023
7 Februari 2023
1 Februari 2023
18 Januari 2023
Handleiding Niet gecategoriseerd
- Accezz
- Aduro
- Nordea
- Feelworld
- Ambient
- Dali
- AXESS
- Rinnai
- Power Acoustik
- Globalo
- Califone
- AcuRite
- CkeyiN
- Swingline
- Planet
Nieuwste handleidingen voor Niet gecategoriseerd
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025