Adwa AD101 Handleiding

Adwa Meetapparatuur AD101

Lees hieronder de 📖 handleiding in het Nederlandse voor Adwa AD101 (2 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
ERROR MESSAGES
Ec: use a fresh buffer solution.
Eb: batteries should be replaced.
SPECIFICATIONS
AD100
Range -2.0 to 16.0 pH
Resolution 0.1 pH
Accuracy ± 0.1 pH
Temp.compensation Automatic
Environment 0 - 50 °C
95 % Relative
Humidity
Battery Life/Type 250 Hrs./4x1.5 V
Dimensions 173 x 41 x 22 mm
AD101
Range -2.00 to 16.00 pH
Resolution 0.01 pH
Accuracy ± 0.02 pH
Temp.compensation Automatic
Environment 0 - 50 °C
95 % Relative
Humidity
Battery Life/Type 250 Hrs./4x1.5 V
Dimensions 173 x 41 x 22 mm
USER MANUAL
AD100 & AD101
pH Testers
• Microprocessor-based pH tester
• Automatic temperature compensation
• Splash-proof keypad
• Automatic shut-off
ACCESSORIES
AD70004P pH 4.01 buffer solution
20 ml sachet (25 pcs.)
AD70007P pH 7.01 buffer solution
20 ml sachet (25 pcs.)
AD70010P pH 10.01 buffer solution
20 ml sachet (25 pcs.)
Dear Customer,
Thank you for choosing an ADWA product.
Please read carefully this manual before
starting operations.
For additional technical information, please
e-mail us at:
sales@adwainstruments.com
ISTRAD100 09/14
www.adwainstruments.com
ERROR MESSAGES
Ec: use a fresh buffer solution.
Eb: batteries should be replaced.
SPECIFICATIONS
AD100
Range -2.0 to 16.0 pH
Resolution 0.1 pH
Accuracy ± 0.1 pH
Temp.compensation Automatic
Environment 0 - 50 °C
95 % Relative
Humidity
Battery Life/Type 250 Hrs./4x1.5 V
Dimensions 173 x 41 x 22 mm
AD101
Range -2.00 to 16.00 pH
Resolution 0.01 pH
Accuracy ± 0.02 pH
Temp.compensation Automatic
Environment 0 - 50 °C
95 % Relative
Humidity
Battery Life/Type 250 Hrs./4x1.5 V
Dimensions 173 x 41 x 22 mm
USER MANUAL
AD100 & AD101
pH Testers
• Microprocessor-based pH tester
• Automatic temperature compensation
• Splash-proof keypad
• Automatic shut-off
ACCESSORIES
AD70004P pH 4.01 buffer solution
20 ml sachet (25 pcs.)
AD70007P pH 7.01 buffer solution
20 ml sachet (25 pcs.)
AD70010P pH 10.01 buffer solution
20 ml sachet (25 pcs.)
Dear Customer,
Thank you for choosing an ADWA product.
Please read carefully this manual before
starting operations.
For additional technical information, please
e-mail us at:
sales@adwainstruments.com
ISTRAD100 09/14
www.adwainstruments.com
CONDITIONING
Remove the cap. If white crystals have
formed, they will be dissolved during
conditioning.
To condition, soak the tip of the tester in
pH 7.01 buffer solution for ten minutes.
CALIBRATION
Calibrate your tester once a week or at
any time you suspect a problem with the
readings. ADWA pH testers can be
calibrated at 4, 7 and 10 pH values.
ALWAYS CALIBRATE AT pH 7 FIRST.
1. Put the tip of the tester in pH 7.01 buffer
solution and press the ON/OFF button.
2. Press CAL button: “7.0” and “pH” will
start flashing. When the sign “pH” stops
flashing, the reading has stabilized. Then
press READ button: “4.0” and “pH” will
start flashing.
3. Rinse the tip of the tester with deionized
water.
4. Put the tip of the tester in pH 4.01 buffer
(for acidic measurements) or in pH 10.01
buffer (for alkaline measurements): “4.0”
(or “10.0”) and “pH” will start flashing.
5. When the sign “pH” stops flashing, the
reading has stabilized. Press READ. The
calibration is completed.
ALWAYS USE A FRESH BUFFER
SOLUTION FOR CALIBRATION.
OPERATION
1. Remove the protective cap from the
bottom of the tester.
2. Press ON/OFF button to turn the tester
on.
3. Place the tip of the tester into the sample
to be measured.
4. Stir the sample and record the reading
when the value has stabilized. The tester
will automatically compensate temperature
variations.
5. Press ON/OFF button to turn the tester
off.
MAINTENANCE
The sensor should be kept moist at all times.
This can be done by storing the tester with
a few drops of pH 7.01 buffer solution in
the protective cap. Rinse the electrode after
each measurement with tap water.
WARNING: DO NOT USE DEIONIZED
OR DISTILLED WATER FOR STORAGE
PURPOSES.
BATTERY REPLACEMENT
When the batteries need to be replaced,
the “Eb” error message will appear on the
display and the tester will turn off automatically
to prevent the unreliable measurement result.
Open the battery compartment at the top
of the tester. Place the batteries noting the
polarity listed in the battery compartment.
CONDITIONING
Remove the cap. If white crystals have
formed, they will be dissolved during
conditioning.
To condition, soak the tip of the tester in
pH 7.01 buffer solution for ten minutes.
CALIBRATION
Calibrate your tester once a week or at
any time you suspect a problem with the
readings. ADWA pH testers can be
calibrated at 4, 7 and 10 pH values.
ALWAYS CALIBRATE AT pH 7 FIRST.
1. Put the tip of the tester in pH 7.01 buffer
solution and press the ON/OFF button.
2. Press CAL button: “7.0” and “pH” will
start flashing. When the sign “pH” stops
flashing, the reading has stabilized. Then
press READ button: “4.0” and “pH” will
start flashing.
3. Rinse the tip of the tester with deionized
water.
4. Put the tip of the tester in pH 4.01 buffer
(for acidic measurements) or in pH 10.01
buffer (for alkaline measurements): “4.0”
(or “10.0”) and “pH” will start flashing.
5. When the sign “pH” stops flashing, the
reading has stabilized. Press READ. The
calibration is completed.
ALWAYS USE A FRESH BUFFER
SOLUTION FOR CALIBRATION.
OPERATION
1. Remove the protective cap from the
bottom of the tester.
2. Press ON/OFF button to turn the tester
on.
3. Place the tip of the tester into the sample
to be measured.
4. Stir the sample and record the reading
when the value has stabilized. The tester
will automatically compensate temperature
variations.
5. Press ON/OFF button to turn the tester
off.
MAINTENANCE
The sensor should be kept moist at all times.
This can be done by storing the tester with
a few drops of pH 7.01 buffer solution in
the protective cap. Rinse the electrode after
each measurement with tap water.
WARNING: DO NOT USE DEIONIZED
OR DISTILLED WATER FOR STORAGE
PURPOSES.
BATTERY REPLACEMENT
When the batteries need to be replaced,
the “Eb” error message will appear on the
display and the tester will turn off automatically
to prevent the unreliable measurement result.
Open the battery compartment at the top
of the tester. Place the batteries noting the
polarity listed in the battery compartment.

Product specificaties

Merk: Adwa
Categorie: Meetapparatuur
Model: AD101

Heb je hulp nodig?

Als je hulp nodig hebt met Adwa AD101 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Meetapparatuur Adwa

Adwa

Adwa AD130 Handleiding

7 Juli 2023
Adwa

Adwa AD32 Handleiding

5 Juli 2023
Adwa

Adwa AD14 Handleiding

5 Juli 2023
Adwa

Adwa ECO407 Handleiding

3 Juli 2023
Adwa

Adwa AD3000 Handleiding

1 Juli 2023
Adwa

Adwa AD330 Handleiding

1 Juli 2023
Adwa

Adwa AD202 Handleiding

30 Juni 2023
Adwa

Adwa AD410 Handleiding

30 Juni 2023
Adwa

Adwa ECO209 Handleiding

29 Juni 2023
Adwa

Adwa AD132 Handleiding

29 Juni 2023

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur

MASIMO

MASIMO MightySat Handleiding

18 April 2024
Stahlwille

Stahlwille 12900/1N Handleiding

18 April 2024
AkYtec

AkYtec SMI2 Handleiding

17 April 2024
PeakTech

PeakTech LDP-335 Handleiding

17 April 2024
PeakTech

PeakTech LDP-235 Handleiding

17 April 2024
PeakTech

PeakTech LDP-135 Handleiding

17 April 2024
GW Instek

GW Instek GDS-2202A Handleiding

16 April 2024
Extech

Extech 407119 Handleiding

16 April 2024
Gossen Metrawatt

Gossen Metrawatt POINTAX 6000M Handleiding

11 April 2024
Be Cool

Be Cool BC23TFK68W Handleiding

11 April 2024