Advantech PCM-26D2CA-BE Handleiding
Pagina's 3 Niet gecategoriseerd
Bekijk de handleiding van Advantech PCM-26D2CA-BE gratis online of download de PDF. Deze handleiding is 2 keer bekeken. Vraag over dit model? Stel een vraag
PCM-26D2CA-BE/CE Startup Manual 1
Before installation, please ensure that the following items
have been included in your shipment:
1. 1 x DB9*2 I/O plate with iDoor bracket
2. 1 x mPCIe card with CAN controller (BE only)
3. 2 x FPC cable (BE only) or
2 x wafer-to-DB9 cable (CE only)
4. 1 x Startup manual
5. 1 x Warranty card
If any of the above items are missing or damaged, contact
your distributor or sales representative immediately.
The support documentation and drivers can be accessed
from the Advantech website.
Supports Win10, Linux Ubuntu 18.04/20.04/24.04
•Documentation
- Datasheet
- StartUp
•Drivers
PCM-26D2CA-BE/CE
2-Ports Isolated CANBus mPCIe, DB9
Startup Manual
Thefollowingtablesandguresshowthepinassignments
of the connector on the bracket to the modular card. If you
seetwoportsorabove,itwillusethesamepin-denition
as this one.
PINCAN Port
1-
2CAN_L
3GND
4-
5-
6-
7CAN_H
8-
9-
PCM-26D2CA -BE-BE
PCM-26D2CA-CE
Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
For technical support services, please visit our support
website at:
http://support.advantech.com.tw
This manual is for the PCM-26D2CA-BE-BE/PCM-
26D2CA-BE-CE.
Part No. 204426D202 Edition 3
May 2025
PIN Assignment
Documentation/Software Support
2 PCM-26D2CA-BE/CE Startup Manual
Youcanconguretheterminatorresistorusingajumper
setting, if necessary, to match the impedance.
PIN# of JP1/JP2Status
Value of Terminator
Resistor
PIN 1-2Open Mode
PIN 2-3Close Mode120 Ohms
TXRX
OrangeGreen
Note: TX & RX will light up at the same time when TX
performs data transmission.
Youcansettheterminatorresistorbyjumpersettingif
necessary to match impedance.
PIN# of JP1Status
Value of Terminator
Resistor
PIN 1-2 (Default)Closed Mode120 Ohms
PIN 2-3Open Mode
Jumper Settings (BE only)
Jumper Settings (CE only) LED Indicator (BE only)
PCM-26D2CA-BE/CE Startup Manual 3
Embedded Computer Installation
1. Remove the screws from the base plate and lift it to
remove it.
2. Insert the mini-PCI card and secure with the screws.
3. Remove the screws to remove the blanking plate.
Embedded Computer Installation
4. Insert the PCM Module through the blanking plate hole
and secure with screws. Attach the PCM Module to the
mini-PCIe card with the cable.
Please follow the direction as shown in the picture.
The corresponded port was marked A/B on motherboard for
cable plug-in direction.
PCM-26D2CA-BE
PCM-26D2CA-CE
Cable Installation
Product specificaties
| Merk: | Advantech |
| Categorie: | Niet gecategoriseerd |
| Model: | PCM-26D2CA-BE |
Heb je hulp nodig?
Als je hulp nodig hebt met Advantech PCM-26D2CA-BE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden