Advanced Network Devices IPBTN-DIS Handleiding

Bekijk gratis de handleiding van Advanced Network Devices IPBTN-DIS (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 45 mensen en kreeg gemiddeld 4.4 sterren uit 3 reviews. Heb je een vraag over Advanced Network Devices IPBTN-DIS of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Smart IP Button

(IPBTN-DIS) Installation

Advanced Network Devices • 3820 Ventura Dr. Arlington Hts. IL 60004

tech@anetd.com• 847-463-2237 • www.anetd.com/

1v1.0

MOUNTING THE DEVICE

•Use device to mark installation location.

•Choose the best location and orientation to

make the push button easy to access by the user,

as well as to connect the network cable.

•Secure device using mounting hardware

appropriate for the installation surface.

•Drywall: #8-32 steel screw x 1-5/8" min. length

fastened to a 75 lbs. rated drywall anchor, or

similar

•Concrete: #8-32 steel screw x 5/8" min. length

fastened to a 8-32 concrete anchor with 9/16"

min. length, or similar

CONNECT TO THE NETWORK

•Connect a network cable (CAT5e or better) to the

RJ-45 port (PoE/PoE+).

•Connect the other end of the network cable to a

PoE (Power over Ethernet) network switch or

PoE injector on a network with a DHCP server.

ACCESS THE DEVICE

Use one of these ways to access the device:

•Enter the IP address assigned by the DHCP server

in your browser.

•Enter the

IPv6 link-local address in your browser,

formatted as

http://[fe80::2246:f9ff:feXX:XXXX](XX:XXXX =

last 6 digits of MAC address).

•Double-click on the device in the IPClockWise

Endpoints list to open the web server interface.

•

For third-party software application, consult

guide for access method (often uses

configuration file).

CONFIGURATION OPTIONS

The device ships with default settings:

SIP Mode "Button"

Push-to-Talk 1 Trigger Only "Yes”

Activate GPIO 0 During Active Call “Yes”

Send Activations Only “Yes”

GPIO 0 Output Pulse Time “5000”

GPIO 0 Output Blink Period “500”

Indicate GPO “0”

Emergency Indication “SIP”

Indicate Trying Action “Clear”

Indicate Success Action “Blink”

Indicate Unready Action “Clear”

Indicate Ready Action “Set”

Indicate Failure Action “Clear”

Configuration File Setup

<SIPConfig

SIP_mode="button"

push_to_talk_ip1_trigger_mode="1"

gpio0_when_active_call="1"/>

<GPIO

pulse_ms_output_gpio0="5000"

blink_ms_output_gpio0="500" />

<GPIO_callback

send_activations_only="1"/>

<Indicate

indicate_gpo="0"

trying_action="clear"

success_action="blink"

unready_action="clear"

ready_action="set"

failure_action="clear" />

REGISTRED SIP CALL

Product specificaties