Adj Pinspot LED RC Handleiding

Bekijk gratis de handleiding van Adj Pinspot LED RC (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.2 sterren uit 8 reviews. Heb je een vraag over Adj Pinspot LED RC of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pinspot LED RC SPECIFICATIONS:

LED: 3W

Working Position: Any safe working position

Power: Rechargable Battery &

Power Adapter

(100~240V, 50/60Hz)

Battery Life: 7 Hours

Power Consumption: 4.5W

Weight: 2lbs./ 1Kgs.

Dimensions: 6.5”(L) x 4”(W) x 6”(H)

166 x 98 x 152mm

Warranty: 3 Year (1095 days)

Unpacking: Thank you for purchasing the Pinspot LED RC by American DJ®. Every Pinspot LED RC

has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the

shipping carton for damage that may have occurred during shipping. If the carton appears to be dam-

aged, carefully inspect your xture for any damage and be sure all accessories necessary to operate

the unit has arrived intact. In the case damage has been found or parts are missing, please contact our

toll free customer support number for further instructions. Do not return this unit to your dealer without

rst contacting customer support.

Introduction: The Pinspot LED RC is part of American DJ’s continuing pursuit for creating high qual-

ity affordable fixtures. The Pinspot LED RC is a simple, small rechargeable battery powered LED light.

This pinspot is light weight and compact which makes it a great piece for mobile DJ’s, architectural

lighting, or ligting effect. The LEDs located on the rear of the unit let you know the current status of

the battery. A lit green LED means that the unit is fully charged, while a yellow lit LED means that the

unit is dead or going to die soon. NOTE: When the Yellow indicator starts blinking or is lit, please

stop using the unit, and start charging it. If you let the batteries die completely, recharging dead

batteries is very hard on the unit and will take some time.

Battery Recharge:To recharge the battery, plug the charger into the back of the unit and plug the other

end into a matching power supply. Put the switch located on the rear of the unit into the “RECHARGE”

position. When the Red LED is lit, this means the unit is charging.

Lens Change: The Pinspot LED RC comes with a standard 12 degree lens already attached. Included

in the box is an optional 6 degree lens. To switch lenses simply remove the retainer ring in front of the

current lens, carefully remove the lens, and attach the 6 degree lens. Replace the retainer ring and the

switch is complete.

Product specificaties