Adj Aggressor HEX LED Handleiding

Adj Effect machine Aggressor HEX LED

Lees hieronder de 📖 handleiding in het Nederlandse voor Adj Aggressor HEX LED (4 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

User Instructions

Rev. 3/14

AGGRESSOR HEX LED

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building,

and electrical damages, injuries to any persons, and direct or

indirect economic loss associated with the use or reliance of

any information contained within this document, and/or as a

result of the improper, unsafe, unsucient and negligent as-

sembly, installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

ADJ Product, LLC - www.adj.com - Aggressor HEX LED Instruction Manual Page 2 ADJ Product, LLC - www.adj.com - Aggressor HEX LED Instruction Manual Page 3

Aggressor HEX LED Warranty Registration

The Aggressor HEX LED two year (730 days) limited war carries a -

ranty. Please fill out the enclosed warranty card to validate your pur-

chase. All returned service items whether under warranty or not, must

be freight pre-paid and accompany a return authorization (R.A.) num-

ber. The R.A. number must be clearly written on the outside of the

return package. A brief description of the problem as well as the R.A.

number must also be written down on a piece of paper and included

in the shipping container. If the unit is under warranty, you must pro-

vide a copy of your proof of purchase invoice. You may obtain a R.A.

number by contacting customer support at (800) 322-6337.

Aggressor HEX LED Features

• Includes Built-In Hanging Yoke

• Sound-Active

• Light Weight

• 12W “6-in-1” (RGBCAW) “Hex Color” LEDs

To optimize the performance of this product, please read these

operating instructions carefully to familiarize yourself with the basic

operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please

keep this manual with the unit, for future reference.

Aggressor HEX LED General Instructions

Introduction:

Thank you for purchasing the ADJ Aggressor HEX LED. To optimize

the performance of this product, please read these operating instruc-

tions carefully to familiarize yourself with the basic operations of this

unit. The Aggressor HEX LED is a bright, six color, rotating moon ower

eect. The unit operates in sound-active mode only.

Customer Support:

ADJ Products, LLC provides a toll free customer support line, to pro-

vide set up help and to answer any question should you encounter

problems during your set up or initial operation. You may also visit us

on the web at www.adj.com for any comments or suggestions.

Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

Do not discard the shipping carton in the trash. Please recycle when

ever possible.

Aggressor HEX LED Introduction

The unit should be mounted using a mounting clamp (not provided),

axing it to the mounting bracket that is provided with the unit.

Always ensure that the unit is rmly xed to avoid vibration and slip-

ping while operating. Always ensure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10

times the unit’s weight. Also, always use a safety cable that can hold

12 times the weight of the unit when installing the xture.

The equipment must be installed by a professional, and it must be

installed in a place where it is out of the reach of people’s grasp.

Aggressor HEX LED Installation

Aggressor HEX LED Operation

ADJ Product, LLC - www.adj.com - Aggressor HEX LED Instruction Manual Page 5ADJ Product, LLC - www.adj.com - Aggressor HEX LED Instruction Manual Page 4

Trouble Shooting: Listed below are a few common problems that

you may encounter, with solutions.

No light output from the unit;

1. Be sure the fuse blown. The fuse has not is located on the rear

panel.

Unit does not respond to sound;

1. Low frequencies (bass) should cause the unit to react to sound.

Tapping on the microphone, quiet or high pitched sounds may not

activate the unit.

Aggressor HEX LED Trouble Shooting

Aggressor HEX LED Fuse Replacement

Aggressor HEX LED Cleaning

Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the

internal and external optical lenses must be carried out periodically to

optimize light output.

1. Use normal glass cleaner and a soft cloth to wipe down the

outside casing.

2. Use a brush to wipe down the fan grill.

3. Clean the external optics with glass cleaner and a soft cloth every

20 days.

4. Clean the internal optics with glass cleaner and a soft cloth

every 30-60 days.

5. Always be sure to dry all parts completely before plugging

the unit back in.

Cleaning frequency depends on the environment in which the fix-

ture operates (I.e. smoke, fog residue, dust, dew). In heavy club use

we recommend cleaning on a monthly basis. Periodic cleaning will

ensure longevity, and crisp output.

Introduction: The ADJ Aggressor HEX LED is a 6-in-1 LED moon-

ower eect. This fixture is designed for mobile DJ’s, clubs, bands,

roller rinks and any arena that requires a compact, light weight, easy

to use unit.

General Operation: This fixture is designed to operate as a stand

alone sound active unit, there is no need of a controller. It has been

tested and there is no assembly necessary. The Aggressor HEX LED

is ready to be plugged in out of the box, there is no power switch.

Plug the unit in to a matching power outlet or into a power pack.

Light output will be immediate when the unit is powered on. The unit

must receive a sound source to operate normally. Use the sound

sensitivity knob on the rear of the unit to adjust the sound sensitivity.

Turning it clockwise will make it more sensitive to sound, turning it

counter-clockwise will make it less sensitive.

Fuse Replacement: First unplug the power. The fuse holder is

located at the rear of the unit next to the power cord. Using a flat-

head screw driver unscrew the fuse holder. Remove the bad fuse and

replace with a new one.

With this feature you can connect the xtures to one another

using the IEC input and output sockets. The quantity that can be

connected is 10 xtures maximum. After 10 xtures you will need

to use a new power outlet. They must be the same xtures. DO

NOT mix xtures.

Aggressor HEX LED Power Cord Daisy Chain

Product specificaties

Merk:	Adj
Categorie:	Effect machine
Model:	Aggressor HEX LED
Kleur van het product:	Zwart
Gewicht:	4200 g
Breedte:	316 mm
Diepte:	330 mm
Hoogte:	313 mm
Aantal lampen:	2 lampen
Soort lamp:	LED
Vermogen lamp:	12 W
Stroombron:	AC
Ingangsspanning:	100 - 240 V
Levensduur lamp:	50000 uur
Kleur licht:	Cyan, Amber, Blue, Green, Red, White
Frequentie:	50/60 Hz
Geschikt voor gebruik binnen:	Ja
Stroomverbruik (typisch):	30 W
Type product:	Discostroboscoop
Verlichtingsmodi:	Geluidsgestuurd
Baldiameter:	- "