Adesso Xtream P500 Handleiding

Bekijk gratis de handleiding van Adesso Xtream P500 (1 pagina’s), behorend tot de categorie Hoofdtelefoon. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.6 sterren uit 6 reviews. Heb je een vraag over Adesso Xtream P500 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1

2

3

6

4

5

•What if the headphones will not power on?

If the headphones will not power on after turning on the power button,

please ensure the headphones has been fully charged and try

powering the headphones on again.

•What if the headphones will not charge?

If the status LED does not turn red when you plug in the charging

cable, please try charging the headphones by connecting it to a

different USB power source.

•What if I’m unable to pair to headphones?

If you are not able to pair to the headphones, please try disabling

bluetooth on your device. Power off the headphones, then power on

the headphones. Then, enable bluetooth on your device. The

headphones will appear as Xtream P500, click or tap on it to pair

•What if I hear no sound through headphones after

pairing?

If you do not hear sound through your headphones, make sure the

sound on your device is not muted and turned up.

Requirements

Features

The Adesso Xtream P500 is a single ear Multimedia Bluetooth Headset

with Microphone that’s lightweight, stylishly designed for active

lifestyles. Bluetooth connectivity ensures high-quality audio, long battery

life, and support for a variety of devices.

Available USB port

Bluetooth enabled device

Connection:

Wireless Range:

Unit Driver:

Frequency:

Sensitivity:

Impedance:

Battery:

Music Playing Time:

Standy By Time:

Built-in Mic:

Net Weight:

Bluetooth 5.0+EDR and Standard 3.5mm plug

> 32 feet (10m)

High quality 40mm speaker

20Hz-20KHz

105dB ± 3dB

32ohm

3.7V 200mAh

5 Hrs

300 Hrs

Omnidirectional

0.43lbs (195g)

Adesso provides a one year limited warranty for all of its products against

defects in material and workmanship.

During this period, Adesso will repair or replace any product which proves

to be defective. However, Adesso will not warranty any product which has

been subject to improper freight handling, shipping abuse, neglect,

improper installation or unauthorized repair. The warranty will not cover

products installed with components not approved by Adesso and

products where the sealed assembly trace has been broken.

If you discover a defect, Adesso will, at its option, repair or replace the

product at no charge to you provided you return it during the warranty

period with freight charges pre-paid to Adesso. Before returning any

product, you must obtain a Return Merchandise Authorization number

(RMA). This RMA # must be clearly marked on the outside of the

package you are returning for warranty service. Be certain to also

include your name, shipping address (no PO Boxes), telephone number,

and a copy of the invoice showing proof of purchase in the package.

FAQs: https://www.adesso.com/faqs/

Email Support:[email protected]

Telephone Support: (800) 795-6788

9:00AM to 5:00PM PST MONDAY - FRIDAY

Xtream P500_EN 11162020

www.adesso.com

English

QuickGuide

Xtream P500

Bluetooth Stereo Headset with

Built-in Microphone

Model: Xtream P500

LIMITED WARRANTY

SUPPORTOTHER LANGUAGES

INTRODUCTION

DESCRIPTIONGETTING STARTED

TROUBLESHOOTING

CONTENTS

Charging Cable

Xtream P500

Charging Port

Microphone

Mode

Volume Up

Volume Down

Power ON/OFF

Micro SD Card Slot

Play/Pause

User Guide

www.morpheus360.com

English

QuickGuide

BLUETOOTH

WIRED MODE

Make sure the headset is in the off state by checking the power LED,

there should be no LED on.

1.

1.

1.

2.Press and hold the multifunction button for 7 seconds until the red and

blue LED start flashing.

3.Follow the operating instructions of your bluetooth device to start the

pairing process, typically this is done by going to a “Connect” or

“Setup”menu and then selecting the option to search the bluetooth

devices.

4.The device will find Xtream P500 and ask whether you are willing to

connect to the headset. Press “Yes” or “Confirm” to confirm this action.

Insert the 3.5MM cable into the AUX port to use the device as a wired

headphone.

TF CARD MODE

Insert the Micro SD / TF card to the slot, and play music directly from

the headset as a media player.

5.

Enter pin 0000, and press “Yes” or “Confirm”. If the connection was

successful the blue LED will flash 3 times.

AUX Port

Product specificaties