Adam Hall 874 E 02 Handleiding

Bekijk gratis de handleiding van Adam Hall 874 E 02 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 50 mensen en kreeg gemiddeld 4.3 sterren uit 4 reviews. Heb je een vraag over Adam Hall 874 E 02 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany

Phone: +49 6081 9419-0 | .com adamhall

874 E 02

ERGO 19“ RACK DRAWER 2HE

SAFETY INFORMATION

1. Please read these instructions carefully.

2. Keep all information and instructions in a safe place.

3. Follow the instructions.

4. Observe all safety warnings. Never remove safety warnings or other information from the

equipment.

5. Use the equipment only in the intended manner and for the intended purpose.

6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations).

Make certain that wall mounts are properly installed and secured. Make certain that the

equipment is installed securely and cannot fall down.

7. During installation, observe the applicable safety regulations for your country.

8. Never install and operate the equipment near radiators, heat registers, ovens or other sourc-

es of heat. Make certain that the equipment is always installed so that is cooled sufficiently

and cannot overheat.

9. Never place sources of ignition, e.g., burning candles, on the equipment.

10. Ventilation slits must not be blocked.

11. Do not use this equipment in the immediate vicinity of water (does not apply to special out-

door equipment - in this case, observe the special instructions noted below. Do not expose

this equipment to flammable materials, fluids or gases.

12. Make certain that dripping or splashed water cannot enter the equipment. Do not place con-

tainers filled with liquids, such as vases or drinking vessels, on the equipment.

13. Make certain that objects cannot fall into the device.

14. Use this equipment only with the accessories recommended and intended by the manufac-

turer.

15. Do not open or modify this equipment.

16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g.,

due to tripping hazards.

17. During transport, make certain that the equipment cannot fall down and possibly cause prop-

erty damage and personal injuries.

18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the

equipment or if it has been damaged in another way, switch it off immediately and unplug

it from the mains outlet (if it is a powered device). This equipment may only be repaired by

authorized, qualified personnel.

19. Clean the equipment using a dry cloth.

20. Comply with all applicable disposal laws in your country. During disposal of packaging, please

separate plastic and paper/cardboard.

21. Plastic bags must be kept out of reach of children.

MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY

You can find our current warranty conditions and limitation of liability at: https://cdn-shop.adam-

hall.com/media/pdf/MANUFACTURERS-DECLARATIONS_ADAM_HALL.pdf

To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1,

61267 Neu Anspach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0

PROPER DISPOSAL OF THIS PRODUCT

(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)

(Valid in the European Union and other European countries with waste separation)

This symbol on the product, or the documents accompanying the product, indicates that this ap-

pliance may not be treated as household waste. This is to avoid environmental damage or person-

al injury due to uncontrolled waste disposal. Please dispose of this product separately from other

waste and have it recycled to promote sustainable economic activity.

Product number874E02

Product type19" Rack Drawers

Material Steel

SurfacePowder coated

Colour Black

Outside height2 U

Outside width434 mm

Outside depth385 mm

Inside height80 mm

Inside width405 mm

Internal depth360 mm

Material thickness1.5 mm

Maximum load20 kg

Weight6.7 kg

FEATURES

• Heavy-duty 1.5 mm steel construction

• Ergonomic full width pull handle

• Pull-to-open latching mechanism

• Full extension ball bearing slides

• Front disconnect for easy drawer removal

• 20 kg load capacity

INTRODUCTION

19“ Rack Drawer with Ergonomic Pull Handle and Latching Mechanism

The ERGO is a very affordable rackmount drawer with heavy-duty 16-gauge steel

construction and easy, ergonomic operation. It integrates a recessed pull handle that

runs the width of the drawer and a convenient push-to-close, pull-to-open latching

mechanism with 3.3 lbs pull force. This economy rack drawer has a black semi-gloss

powder coating finish and 44 lbs load capacity. It features smooth-running full extensi-

on ball bearing slides with front disconnect for easy drawer removal.

SPECIFICATIONS

Product specificaties