ACP MXP5223 Handleiding
Bekijk gratis de handleiding van ACP MXP5223 (19 pagina’s), behorend tot de categorie Magnetron. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.6 sterren uit 2 reviews. Heb je een vraag over ACP MXP5223 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/19
Keep these instructions for future
reference. If the equipment changes
ownership, be sure this manual
accompanies equipment. Please refer to
the SAFETY INSTRUCTIONS for important
safety information prior to using this oven.
Owner’s Manual
HIGH SPEED COMMERCIAL COMBINATION OVEN
PRESS
2
Model Identication
Any questions or to locate an authorized ACP servicer,
call ACP ComServ Service Support.
– Inside the U.S.A. or Canada, call toll-free at 866-
426-2621.
– Outside the U.S.A. and Canada, call 319-368-8120.
– Email: commercialservice@acpsolutions.com
Warranty service must be performed by an authorized
ACP servicer. ACP also recommends contacting an
authorized ACP servicer, or ACP ComServ Service
Support if service is required after warranty expires.
When contacting ACP, provide product information.
Product information is located on oven serial plate.
Record the following information:
Model Number: _____________________________
Serial or S/N Number: ________________________
Date of installation: __________________________
Dealer’s name and address: ___________________
__________________________________________
__________________________________________
To avoid risk of electrical shock or death, this oven must be grounded and plug must not be altered.
Grounding/Earthing Instructions
Oven MUST be grounded. Grounding reduces risk of electric shock by providing an escape wire for the electric
current if an electrical short occurs. This oven is equipped with a cord having a grounding wire with
a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.
Consult a qualied electrician or servicer if grounding instructions are not completely understood, or
if doubt exists as to whether the oven is properly grounded.
Do not use an extension cord.
If the product power cord is too short, have a qualied electrician install a three-slot receptacle. This
oven should be plugged into a separate circuit with the electrical rating as provided in product specications. When
the combination oven is on a circuit with other equipment, an increase in cooking times may be required and fuses
can be blown.
External Equipotential Earthing Terminal (export only)
Equipment has secondary earthing terminal. Terminal provides external earthing connection used in addition to
earthing prong on plug. Located on outside of oven back, terminal is marked with symbol shown below.
WARNING
Before using your oven, please take the time to read the Safety Instructions which shipped with the oven.
Product specificaties
| Merk: | ACP |
| Categorie: | Magnetron |
| Model: | MXP5223 |
Heb je hulp nodig?
Als je hulp nodig hebt met ACP MXP5223 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Magnetron ACP
26 Augustus 2025
26 Augustus 2025
25 Augustus 2025
25 Augustus 2025
25 Augustus 2025
25 Augustus 2025
25 Augustus 2025
25 Augustus 2025
20 Augustus 2022
20 Augustus 2022
Handleiding Magnetron
- Aftron
- Afk
- Thomas
- Omega
- Hanseatic
- Orima
- Emerson Radio
- Melissa
- Philco
- Rommer
- Palsonic
- Sôlt
- BEKO
- Rival
- Saturn
Nieuwste handleidingen voor Magnetron
15 September 2025
13 September 2025
13 September 2025
9 September 2025
9 September 2025
9 September 2025
8 September 2025
8 September 2025
8 September 2025
8 September 2025