Acoustic Energy Bluetooth Speaker System Handleiding

Acoustic Energy Bluetooth Speaker System

Lees hieronder de đź“– handleiding in het Nederlandse voor Acoustic Energy Bluetooth Speaker System (4 pagina's) in de categorie . Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
How to use your Stereo Bluetooth Speakers
Comment utiliser votre système Stereo Bluetooth Speakers
Verwendung des Stereo Bluetooth Lautsprechers
CĂłmo utilizar sus altavoces estereofĂłnicos Bluetooth
Designed and engineered by Acoustic Energy Limited, England.
Made in Malaysia
How to use your Stereo Bluetooth Speakers
1. Plug in the mains adaptor.
2. Separate the speakers from the amplifier unit if required - the
cable simply unwinds from the back of the speakers. The speakers
can be disconnected from the amplifier unit by holding it and sliding
the speakers forward.
3. Turn on via the large silver knob on front – The LED light should
flash green slowly, showing that the unit is in standby mode.
4. To connect an A2DP stereo Bluetooth device for the first time:
a. Hold down the MFB for approximately 8 seconds
until the LED flashes red/green.
b. Search for the Stereo Bluetooth Speaker system
on your Bluetooth device and pair with it once you’ve
found it. See your device’s (e.g. mobile phone) user
manual for more detail on this.
c. Enter the pass-code, which is 8888.
d. Once you have successfully paired the speakers
and your device, the LED will blink 5 times.
e. This can be repeated if you would like to pair with
an alternative device at any time.
5. To connect to the Stereo Bluetooth device that was last used,
press the MFB once when in standby mode.
6. To play a hard wired source such as a digital music (MP3 etc)
player, simply connect the source in to the mini jack connector on
the rear of the unit and adjust the volume knob until it’s at the level
you want.
Please note that this will disconnect the Bluetooth device and the mini-jack
will have to be removed to return to a Bluetooth connection!
on / off
volume
status LED
multi function button
(MFB)
3.5mm jack
speaker connectors
12v DC jack
Item
Power On
Product Name
General Specification
Stereo Bluetooth Speaker
Model Number AE29-06C
Type Stereo Active Bluetooth Speaker System
2 x 10 W
Power Output
Frequency response +/- 3dB 70Hz - 18KHz
Drive Unit Full range, low distortion, woven glass
Dimensions 387 x 155 x 130
2.25Kg
Weight
Bluetooth Standard V1.2
Internal
10m
Bluetooth A2DP Profile For compatibility with any Bluetooth audio devices
to perform stereo audio streaming
Theoretical range in open field
Antenna
8 OhmsSpeaker Impedance
Standby
Paired
Successfully
No Pairing found
Standby
(abnormal
disconnection)
Re-link with the
last connected
device
Hardwired Mode
Blink Green
Steady Orange
Blink Green
(5 times rapidly)
Blink Orange
(5 times rapidly)
Blink Green
Pairing
Exit Pairing
In standby mode, press and
hold the MFB for 8 seconds Blink Green & Red
Steady Green
(for 3 sec)
Connect power & turn knob
front
back
Action LED Status Note
System will re-link with the
last connected A2DP device
automatically within 10
minutes
If nothing pairs within 2
minutes, the system will exit
pairing mode, and enter
standby mode.
In pairing mode, press and
hold MFB for 8 Seconds
Press MFB once in
standby mode
Plug source into min-jack
connector on rear of unit
This will disconnect feed from
bluetooth module
Products that display the crossed-out wheeled bin logo cannot be disposed of as
domestic waste but must be taken to a facility capable of recycling them and
appropriately handling any waste by-products. Contact your local authority for details of
the nearest such facility.
on/off (marche/arrĂŞt)
volume
voyant d'Ă©tat LED
bouton multifonction
(MFB)
prise jack
3,5 mm
connecteurs de
haut-parleur
prise jack
12v DC
Elément
Mise sous
tension
Nom du produit
Spécifications générales
Stereo Bluetooth Speaker
Numéro de modèle AE29-06C
Type Système Stereo Active Bluetooth Speaker
2 x 10 W
Puissance de sortie
Réponse en fréquence +/- 3 dB 70 Hz – 18 KHz
Amplificateur Gamme complète, faible distorsion, verre tissé
Dimensions 387 x 155 x 130
2,25 kg
Poids
Norme Bluetooth V1.2
Interne
10 m
Profil Bluetooth A2DP Compatible avec tout appareil audio Bluetooth
pour diffusion continue stéréo audio
Portée théorique en champ libre
Antenne
8 ohmsImpédance haut-parleur
Veille
Connexion
réussie
Aucune
connexion
trouvée
Veille
(débranchement
anormal)
Reconnexion
au dernier
appareil
connecté
Mode câblé
Vert clignotant
Orange fixe
Vert clignotant
(5 fois rapidement)
Orange clignotant
(5 fois rapidement)
Vert clignotant
Connexion
Abandonner
connexion
Rouge et vert
clignotant
Vert fixe (pendant
3 secondes)
Raccordez l'alimentation
Ă©lectrique et tournez le bouton
avant
arrière
Action Voyant
d'Ă©tat LED Note
Appuyez une fois sur
le bouton MFB en mode veille
Branchez la source dans la prise
mini-jack à l'arrière de l'amplificateur
En mode connexion, appuyez et
maintenez enfoncé le bouton
MFB pendant 8 secondes
Si aucune connexion n'est
établie dans un délai de
2 minutes, le système quittera
le mode connexion et lancera
le mode veille
Le système se reconnectera
automatiquement au dernier
appareil connecté A2DP dans
un délai de 10 minutes
Cela débranchera l'alimentation
du module bluetooth
En mode
veille
, appuyez et
maintenez enfoncé le bouton
MFB pendant 8 secondes
Comment utiliser votre système Stereo Bluetooth Speakers
1. Branchez l'adaptateur d'alimentation secteur.
2. Séparez les haut-parleurs de l'amplificateur si nécessaire ; le câble
se déroule facilement à partir de l'arrière des haut-parleurs. Les
haut-parleurs peuvent être débranchés de l'amplificateur en le tenant
fermement et en faisant glisser les haut-parleurs vers l'avant.
3. Mettez sous tension à l'aide du grand bouton argenté à l'avant. Le
voyant LED doit clignoter lentement en vert, indiquant ainsi que
l'amplificateur est en mode veille.
4. Pour connecter le système A2DP Stereo Bluetooth pour la première
fois :
a. Maintenez enfoncé le bouton multifonction MFB pendant
environ 8 secondes, jusqu'Ă  ce que le voyant LED clignote
rouge/vert.
b. Recherchez le système Stereo Bluetooth Speaker sur
votre appareil Bluetooth et connectez-vous une fois que
vous l'avez trouvé. Consultez le manuel d'utilisation de
votre appareil (par exemple téléphone mobile) pour plus
d'informations sur cette connexion.
c. Entrez le mot de passe qui est 8888.
d. Une fois que vous avez correctement connecté les
haut-parleurs et votre appareil, le voyant LED clignotera
5 fois.
e. Cette opération peut être répétée à tout moment si
vous voulez vous connecter avec un autre appareil.
5. Pour se connecter à l'appareil Stereo Bluetooth utilisé en dernier,
appuyez une fois sur le bouton multifonction MFB en mode veille.
6. Pour lire une source câblée, par exemple un lecteur de musique
numérique (MP3, etc.), raccordez simplement la source au
mini-connecteur jack à l'arrière de l'amplificateur et tournez le bouton du
volume jusqu'à ce que vous obteniez le volume sonore souhaité.
Veuillez noter que cela débranchera l'appareil Bluetooth et que la prise
mini-jack devra être retirée pour rétablir la connexion Bluetooth !
Les produits affichant le logo d'une benne à ordures barrée ne peuvent pas être éliminés
comme des déchets ménagers, mais doivent être rapportés dans une installation pouvant
les recycler et traiter de manière appropriée les sous-produits provenant des déchets.
Consultez les autorités locales pour connaître l'installation de ce type la plus proche.


Product specificaties

Merk: Acoustic Energy
Categorie:
Model: Bluetooth Speaker System

Heb je hulp nodig?

Als je hulp nodig hebt met Acoustic Energy Bluetooth Speaker System stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Acoustic Energy

Handleiding

Nieuwste handleidingen voor